http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
블루투스(Bluetooth) 기반의 노인 가정 감시 통합 시스템 개발
이계동,유영일,유선국,이건기,김남현 대한의료정보학회 2004 Healthcare Informatics Research Vol.10 No.2
The remote surveillance system based on the wireless home sensor network, wireless internet connection, and the portable, hand-held device has been designed for the patron to get the emergency alarm for immediate care for the Dementia aged, when the patron is not at home. It consists of transmitting server and the receiving terminal. The transmitting server gathers the information through bluetooth connection regarding to environment threatening the safety of the Dementia aged from five sensors, including fire, gas, conductivity, photo, and motion sensors, and cameras up to the number of 16, fixated within home. It also determines the emergency situation automatically from sensors' environmental condition and the motion detected from the camera output targeted to the aged people, and sends the alarm message with the picture taken from home to the patrol for comprehending the emergency situation remotely. Either the PDA or the cellular phone is used as the receiving terminal device through wireless connectivity without the location limitation for the patrol. The functional evaluation via the implemented prototype system has been performed to initially demonstrate the efficacy, the usefulness, and ease to operate for later use for either solitarily living old people or nursery schools and infantile shelters.
특징점 추출기법을 이용한 접근불능지역의 위성영상 GCP 칩 자동추출
이계동,윤종성 한국측량학회 2019 한국측량학회지 Vol.37 No.4
The Ministry of Land, Infrastructure and Transport is planning to launch CAS-500 (Compact Advanced Satellite 500) 1 and 2 in 2019 and 2020. Satellite image information collected through CAS-500 can be used in various fields such as global environmental monitoring, topographic map production, analysis for disaster prevention. In order to utilize in various fields like this, it is important to get the location accuracy of the satellite image. In order to establish the precise geometry of the satellite image, it is necessary to establish a precise sensor model using the GCP (Ground Control Point). In order to utilize various fields, step - by - step automation for orthoimage construction is required. To do this, a database of satellite image GCP chip should be structured systematically. Therefore, in this study, we will analyze various techniques for automatic GCP extraction for precise geometry of satellite images. 국토교통부에서는 2019년과 2020년에 차세대 중형위성 1호 및 2호 기를 발사하여, 지구환경 모니터링 및 접근불능지역에 대한 수치지도 제작에 활용하고자 하고 있다. 차세대 중형 위성을 통해 수집된 위성영상정보는 지구환경 모니터링, 지형도 제작, 재난재해 예방을 위한 분석 등 다양한 분야에 활용이 가능하다. 이와 같이 다양한 분야에 활용하기 위해서는 위성영상의 위치정확도 확보가 중요하며, 위성영상의 정밀기하수립을 위해 지표상의 정확한 지상기준점(GCP: Ground Control Point)을 사용하여 정밀 센서 모델을 수립하는 과정이 필요하다. 또한, 다양한 분야의 활용을 위해 정사영상 구축을 위한 단계별 자동화가 필요하며, 이를 위해 위성영상 GCP 칩의 DB (Data Base)가 체계적으로 구축되어야 한다. 따라서 본 연구에서는 위성영상의 정밀기하수립을 위하여 GCP를 자동 추출하는 다양한 기법들을 분석하여 최적의 방법을 도출하고자 한다.
고정익 무인비행장치의 카메라 짐벌이 정사영상의 위치정확도에 미치는 영향 분석
이계동,박경식,박재연 대한공간정보학회 2024 대한공간정보학회지 Vol.32 No.1
측량에 사용되는 회전익 무인비행장치에는 대부분 짐벌이 장착되어 있지만 고정익의 경우 특수한 목적을 지니는 일부 기체에만 장착되어 있다. 본 연구에서는 고정익 기체의 짐벌 유무가 정사영상의 위치정확도에 미치는 영향을 평가하기 위해 기체에 2-Axis(Roll, Pitch) 짐벌을 장착하고 3회, 짐벌을 장착하지 않고 3회 총 6회에 걸쳐 데이터를 수집하였다. 수집한 데이터는 Structure from Motion (SfM) 방식을 사용하여 정사영상과 수치표고모델을 제작하였고, 이때 기준점을 입력하여 6세트, 입력하지 않고 6세트, 총 12세트의 데이터를 생성하였다. 실험 결과, 짐벌 사용 시 위치 정확도가 짐벌을 사용하지 않고 수집한 데이터에 비해 좀 더 양호한 것으로 나타났다. 이를 통해 고정익 기체에서 짐벌 사용 시 정확도가 향상되는 것을 확인할 수 있었으며, 고정익 기체에서 짐벌의 효용성을 검증하였다. Most rotary-wing UAVs used in surveying are equipped with gimbals, but fixed-wing UAVs only have gimbals attached to a few specialized aircraft for certain purposes. In this study, a 2-Axis (Roll, Pitch) gimbal was mounted on the aircraft to evaluate the effect of the presence or absence of a gimbal on the fixed-wing aircraft on the positional accuracy of orthoimages. Data was collected a total of 6 times, 3 times each depending on whether or not a gimbal was used. The collected data were processed using the Structure from Motion (SfM) method to produce orthomosaics and digital elevation models. At this time, image processing was divided into 6 sets using ground control points and 6 sets without using ground control points, for a total of 12 sets. The experimental results indicated that the positional accuracy was slightly better when data were collected with a gimbal compared to without. This confirms that the use of a gimbal on fixed-wing UAVs enhances accuracy, thereby verifying the utility of gimbals in fixed-wing UAV surveying applications.