http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
파쇄골 이식을 이용한 무시멘트성 비구 컵 재치환술의 10년 이상 추시 결과
신승한 ( Seung Han Shin ),김영민 ( Young Min Kim ),윤강섭 ( Kang Sup Yoon ),구경회 ( Kyung Hoi Koo ),유정준 ( Jeong Joon Yoo ),남광우 ( Kwang Woo Nam ),김희중 ( Hee Joong Kim ) 대한고관절학회 2006 Hip and Pelvis Vol.18 No.4
목적: 저자들은 파쇄골 이식과 서로 다른 표면 처리의 비구 컵을 이용한 무시멘트성 비구 컵 재치환술의 10년 이상 추시 결과를 분석하였다. 대상 및 방법: 40명, 40고관절을 대상으로 하였으며, 재치환술시 평균 연령은 44.5세 였다. 재치환술시 10례는 수산화인회석 피복(hydroxyapatite-coated) 컵이, 30례는 다공성 피복(porous-coated) 컵이 사용되었다. 평균 추시 기간은 12년 1개월(10년~15년)이었으며, 재-재치환술 시행이나 비구 컵의 해리는 추시의 종결점으로 판단하였다. 결과: Harris 고관절 점수는 술전 평균 52점에서 최종 추시시 평균 75점이었다. 추시 기간 중 17례에서 비구 컵의 해리가 관찰되었으며, 해리가 관찰되기까지 평균 9년(3년 9개월~14년 4개월)이 소요되었다. 비구 컵 해리는 수산화인회석 피복 컵 중 8례, 다공성 피복 컵 중 9례에서 발생하였다. 이 중 14례에서 재-재치환술이 시행되었으며, 재-재치환율은 다공성 피복 컵에서 20%, 수산화인회석 피복 컵에서 80%였다. 그 외에 비구 liner의 마모로 인해 비구 liner와 인공 골두만을 교체한 경우가 2례 있었다. 파쇄이식골은 전례에서 골결합된 소견을 보였다. 골결합까지는 평균 5.2개월(2~9개월)이, 골유합까지는 평균 12개월(5~18개월)이 소요되었다. 결론: 파쇄골 이식을 이용한 무시멘트성 비구 컵 재치환술의 10년 이상 추시 결과, 수산화인회석 피복 컵이 다공성 피복컵보다 유의하게 높은 실패율을 보였다(P<0.05). 다공성 피복 컵을 이용한 파쇄골 이식술은 고관절 재치환술시 비구측골결손을 재건할 수 있는 효과적인 방법으로 여겨진다. Purpose: We evaluated the results of cementless acetabular revisions performed with morselized bone grafting and screw-fixed hemispherical cups with different surface treatments. Materials and Methods: Forty hips, which had been followed for more than 10 years, were included in this study. Reconstruction was performed with 10 hydroxyapatite (HA)-coated cups and 30 porocoated ones. The mean followup time was 12 years and 1 months (range, 10 years to 15 years). Re-revision or radiographic loosening was considered as an endpoint of follow-up. Results: The average Harris hip score improved from 52 points to 75 points. During the follow-up period, radiographic loosening was observed in 17 hips. The loosened implants were HA-coated cups in 8 hips and porocoated ones in 9 hips. In 14 of these, re-revision of the cups was performed. The re-revision rate was 20% for the porocoated cups and 80% for the HA-coated cups. There were 2 hips with liner wear, which had undergone liner and head changes. Bone grafts were united in all the hips. The average time to union was 5.2 months (range, 2 to 9 months), and the average time to incorporation was 12 months (range, 5 to 18 months). Conclusion: Our results imply that HA-coated cups have a significantly higher failure rate compared with the porocoated ones (P<0.05) after a minimum follow-up of 10 years. Morselized bone grafting with use of a porocoated cup is an effective modality, which can restore the bone loss of the acetabulum in revision total hip arthroplasty.
Sunset Yellow 액정 색소를 이용한 광학적 이방성 필름 제조
신승한 ( Seung Han Shin ),김병철 ( Byung Chul Kim ),장유진 ( Eu Gene Chang ) 한국공업화학회 2011 공업화학 Vol.22 No.1
자기 조립성 염료인 Sunset Yellow-FCF 수용액은 상온에서 농도 25wt%부터 schlieren 구조의 액정상을 보이기 시작하여, 28wt% 이상이면 완전한 네마틱 액정상으로 관찰되었다. 전단배향에 의한 코팅으로 광학적 이방성 필름을 제조하기 위해서는 30wt% 이상의 농도가 필요하였다. 액정 색소의 농도, 코팅속도, 건조 온도, 상대습도 등 코팅 변수가 최종 박막필름의 두께, 투과도에 미치는 영향 분석에 의하면, 최종 필름의 두께에는 용액의 농도가 가장 큰 영향을 주었으며, 평행방향의 투과도에는 건조 온도와 농도의 영향이 가장 컸다. 특히 Sunset Yellow-FCF의 농도 증가로 전단코팅에 의한 배향성이 개선되고 높은 편광도를 갖는 필름제조가 가능하였다. 본 실험에서는 33wt%의 Sunset Yellow-FCF 수용액을 사용하면, 89.7~98.7%의 편광도를 갖는 광학적 이방성 필름이 제조되었다. The aqueous solution of Sunset Yellow-FCF (SY-FCF) began to show schlieren texture at room temperature when its concentration reaches 25 wt%. A further increase of the concentration of SY-FCF to 28wt% resulted in a perfect nematic liquid crystal phase. However, more than 30wt% of SY-FCF in aqueous solution was required to make an optically anisotropic film simply by shear coating. In our study, concentration of SY-FCF solution, coating speed, drying temperature, and relative humidity were considered as coating parameters affecting the preparation of optically anisotropic thin films. From analysis of variance analysis (ANOVA), the solution concentration was revealed as a main factor affecting the film thickness. The drying temperature and solution concentration were main factors affecting the transmittance of parallel direction (To). Especially, SY-FCF aqueous solution with high concentration induced a better alignment of LC columns and produced highly oriented anisotropic films. In this study, optically anisotropic films prepared by 33wt% of SY-FCF in aqueous solution showed 89.7~ 98.7% of degree of polarization.
유방암 진단 활용을 위한 마이크로파 라디오미터 측정 데이터의 GUI 시스템 구현
신승원(Seung-Won Shin),김경섭(Kyeong-Seop Kim),이정환(Jeong-Whan Lee),한종삼(Jong-Sam Han),허규학(Kyou-Hak Heo) 대한전기학회 2013 전기학회논문지 Vol.62 No.6
In this study, a novel Graphic User Interface (GUI) software development system is suggested so that it can be applied to diagnose breast cancer with utilizing 3~4.2 GHz microwave radiometric data. The estimated inner and surface temperature values on the patient’s right and left breast in terms of microwave radiometry are visualized in HSV color mapping space and their relevant contour regions and lines are depicted by Marching Square graphic algorithm. Also the database system is implemented in terms of patient and diagnostic module to support the medical decisions concerning the breast cancer diagnosis.
금(金) 浮選(부선) 광미(鑛尾)로부터 금(金)의 회수(回收)에 관한 연구(硏究)
신승한,강현호,홍종원,이진수,박제현,한오형,Shin, Seung-Han,Kang, Hyun-Ho,Hong, Jong-Won,Lee, Jin-Soo,Park, Je-Hyun,Han, Oh-Hyung 한국자원리싸이클링학회 2010 資源 리싸이클링 Vol.19 No.6
대우조선해양 S.M.C는 국내에서 가행중인 유일한 금광산으로 현재 160 ton/day의 원광을 처리하여 금을 생산하고 있으며, 150 ton/day 이상의 광미가 발생하고 있다, 광미 중 일부는 탈수 건조 후 갱도 충전재로 사용하고 있으나 대부분 광미댐에 적치하고 있다. 광미의 성분을 분석한 결과 Au 품위 1.5~2.0 g/ton이 함유되어 있어, 하루에 버려지는 금은 225~300 g 이므로 이를 회수하고 재활용할 수 있는 방안의 마련이 시급한 실정이다. 본 연구에서는 광미에 함유된 Au를 회수하기 위한 기술을 개발하기 위해 부유선별법을 이용하여 일련의 실험을 실시하였으며, 포수제 KAX (97.2 g/ton), 기포제 AF 65 (248 ml/ton), 억제제 sodium silicate (4kg/ton)의 조건에서 Au품위 21.31 g/ton, 실수율 62.73% 산물을 얻을 수 있었다. 따라서 폐광미로부터 얻어진 정광을 다시 l차 조선공정에 재급광할 경우 대표적인 귀금속인 금을 회수할 수 있다. S.M.C (DSME), only operating gold mine in Korea, is processing about 160 ton/day to recover gold and more than 150 ton/day of tailing is produced. Some portion of the tailings are used as a filler material after drying, but most of them are stored on the tailing dam. As a result of chemical analysis by a fire assay method, it contained Au 1.5~2.0 g/ton and 225~300 g per day of gold is getting discarded. It is urgent to develop a technology to recover and reutilize Au. In the present study, flotation tests were carried out to recovery gold for the tailings. Test results show that products with gold grade 21.31 g/ton(Au grade) and 62.73% (Au recovery) were obtained under the optimal conditions including KAX addition rate 97.2 g/ton, frother AF 65 (0.248 l/ton) and depressant sodium silicate (4 kg/ton), it's possible to recover one of the most valuable metal Au, by re-feeding to rougher flotation.