http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
문현욱,서강수,최희태,신용진 한국전기전자재료학회 1990 電氣電子材料學會誌 Vol.3 No.3
본 논문은 저손실 Mn-Zn-Fe 페라이트 제조에 관하여 연구한 것이다. Mn-Zn-Fe 페라이트는 16mol% Xno, 31mol% MnO 및 53mol% Fe$_{2}$O$_{3}$로 조성하였으며 0.1wt% $Na_{2}$SiO$_{3}$ 0.05wt% $Na_{2}$SiO$_{3}$ 0.1%wt% CaO 0.05% SiO$_{2}$ 및 0.05wt% SiO$_{2}$ 및 0.05wt% $Na_{2}$SiO$_{3}$ 0.1% CaO 0.05wt% $Al_{2}$O$_{3}$를 미량 첨가하였다. 그리고 하소와 분쇄과정을 거친 분말은 충진성을 높이기 위하여 과립화하였다. 소결 1250, 1300 및 1350.deg.C에서 이루어졌고, 평형 산소분압은 소오킹 시 PO$_{2}$는 6%부터 시작하여 점차 감소시켰으며 900.deg.C에서 순수한 질소 분위기로 냉각시켰다. 초투자율, 손실계수 및 고유저항 등의 자기적인 특성은 1300.deg.C에서 소결했을 경우의 것이 가장 우수하였다. 즉, 초투자율은 2*$10^{3}$~$10^{3}$의 높은 값을 얻을 수 있었으며 tan.delta./.mu.i값은 100KHz~ 400KHz의 고파수대에서 9*10$_{-6}$~21*10$_{-6}$이었으며 고유저항 값은 485~680 .OMEGA.-cm의 높은 값을 나타내어 중간주파수대의 자심재료에 적합한 페라이트임을 확인하였다.
서연옥,이영진,박상문,표정기,정진현,김성호,최정기,이우균,정동준,문현식 경상대학교 농업생명과학연구원 2009 농업생명과학연구 Vol.43 No.6
본 연구는 2007년도 조사된 국가산림자원조사 자료를 이용하여 충북지방에 분포하는 주요 수종에 대하여 평균 연륜생장량과 연륜생장량에 영향을 미치는 인자들과의 상관관계를 분석하고자 하였다. 충북지역에서 조사된 고정표본점은 총 56개소로 다양한 수종이 분포하였으며 그 중 개체수 분포 비율이 높은 10개 수종에 대하여 총 800본의 연륜생장량이 조사된 목편 자료를 대상으로 분석하였다. 충북지방에서 평균 연륜생장량이 가장 높은 수종은 아까시나무(2.30mm/yr)로 나타났고, 그 다음으로는 졸참나무(2.27mm/yr)>산벚나무(1.98mm/yr)>일본잎갈나무(1.98mm/yr) 순으로 나타났다. 대부분 주요 수종들의 경우, 영급과 임분밀도가 증가함에 따라 평균 연륜생장량은 감소하는 경향으로 나타났다. The purpose of this study was to analyze annual tree ring growth characteristics for major tree species distributed in Chungbuk province. A total of 800 sample trees from 56 permanent sampling plots measured by the 5th Korean National Forest Inventory Program in 2007 was used for the calculation of annual growth rates. According to the results of this study, the species of Robinia pseudoacacia(2.30mm/yr) showed the best annual tree ring growth rates and the others are Quercus serrata(2.27mm/yr)>Prunus sargentii(1.98mm/yr)> and Larix leptolepis(1.98mm/yr) in order. Most of the major tree species in Chungbuk province, as tree age and stand density increased, annual tree ring growth rates tended to decreased. This information could be very useful for forest managers to understand annual tree ring growth characteristics in Chungbuk province.
문현욱,최희태,서강수,신용진 明知大學校 産業技術硏究所 1995 産業技術硏究所論文集 Vol.14 No.-
In this paper, we mention he fabrication of Sr ferrite plastic magnet. In order to compose Sr ferrite, first, a little CaO, SiO₂, Na₂SiO₃, and Al₂O₃ are added to SrO5.9Fe₂O₃. Then, the composition is calcinated at 1225℃ under N₂ enviroment for 1 hourwith addition of PVA 5wt% solution. The carbon coating method increase grinding effect on powder fabrication. To fabricate anisotropic Sr ferrite plastic magnet, 80-89wt% of Sr ferrite and polyamide6 are kneaded and then 0-12kOe of magnetic field is applied. On magnet fabrication, an optimal condition of injection mold is obtained under the injection temperature 270℃, the injection pressure 120㎏/㎠, the magnetic field 8kOe and magnetic field applied time 8sec. As the result of experiments, we obtain (BH)max = 2.09MGOe property on anisotropic plastic magnet which is fabricated by using injection mold method in magnetic field.