A Study on Current Use of Land in Green Areas and Improvement -Focused on Jeon-ju City-

박호수,정철모 한국주거환경학회 2018 주거환경(한국주거환경학회논문집) Vol.16 No.4

This study focuses on strengthening the land use problem and the management policy of the green policy. First, in this study, we investigated the problems of land use of green land through analysis of green area development permit confirmed through official procedure of city planning committee. Second, this study investigated the requirements for improvement of green land policy through individual interview. Four types of residential personnel were selected. Male - to - male interviewed data analysis. The analysis showed that the demand for the four types of residents has shifted. In conclusion, natural green spaces face the need to develop factories, homes and neighborhood service buildings. In particular, renewable facilities for solar energy systems have increased rapidly. Therefore, it is very important to establish a demand for location discrimination that is supported by the land-use system for supply of car supported by the complex land-use technology tool and the sub-district land-use plan.

상수도 처리용 정적 혼합기 내부 유동장의 수치 시뮬레이션

박호수(Ho Su Park),박영민(Young Min Park),박재일(Jae Il Park),정희택(Hee Taeg Chung) 대한기계학회 2013 대한기계학회 춘추학술대회 Vol.2013 No.5

Numerical simulation was performed to investigate the flow characteristics inside static in-line mixers for water treatments. RANS3D flow solvers with the standard k-? turbulence model were used for the three cases of the computation conditions. The hydraulic performances were analyzed in sense of the pressure drop and turbulence mixing properties. Through the comparison of the elements composing the mixers, the basic understanding of the mixing mechanism could be obtained to be used for the parametric study of the design.

초음파 금속 용착을 위한 공구혼의 최적설계

장호수(Ho-Su Jang),박우열(Woo-Yeol Park),박동삼(Dong-Sam Park) 한국생산제조학회 2011 한국생산제조학회지 Vol.20 No.3

Ultrasonic metal welding can be used to weld different metals together safely and precisely, without solder, flux and special preparation. Ultrasonic metal welding machine consists of a power supply, a transducer, a booster and a horn. This paper designed the horn needed for Ultrasonic metal welding. The horn has to be designed and manufactured accurately, because measurements such as the shape, length, mass and etc. have effects on the resonant frequency and the vibration mode. The designed horn has the feature of 40,000㎐ of nature frequency, and maximizes vibration range in the Tip by resonance in the frequency of ultrasonic wave machine. In this paper, we calculated and analyzed the natural frequency to find the optimal design of the horn that had the amplitude about 12㎛ by the modal analysis and harmonic analysis using ANSYS. And we analyzed FFT analysis of the manufactured horn.

고구마 유래 안토시아닌과 카로티노이드 추출물의 Caco-2 소장상피세포 단층막 투과성

박우성(Woo Sung Park),구경아(Kyung Ah Koo),김혜진(Hye-Jin Kim),권지민(Ji-Min Kwon),강동민(Dong-Min Kang),정혜진(Hye Jin Chung),이신우(Shin Woo Lee),김호수(Ho-Su Kim),곽상수(Sang-Soo Kwak),안미정(Mi-Jeong Ahn) 한국식품영양과학회 2021 한국식품영양과학회지 Vol.50 No.8

신자미 자색고구마의 안토시아닌 추출물과 신황미 황색고구마의 카로티노이드 추출물의 장관막 투과도를 알아보기 위하여 Caco-2 상피세포를 이용하였다. Caco-2 세포에 대해 안토시아닌과 카로티노이드 추출물들의 세포독성을 확인하여 세포독성이 관찰되지 않은 10 mg/mL와 0.5 mg/mL 농도에서 각각의 단층막 투과도 실험을 진행하였다. Caco-2 세포가 transwell에 단층막을 형성하도록 25일 동안 배양하였고, 투과도 측정에 적합한 in vitro 실험모델인지를 검증하기 위해 lucifer yellow와 atenolol, propranolol을 처리하여 단층막의 integrity를 분석하였다. 그 결과 lucifer yellow는 0.53%, atenolol의 투과계수는 (6.01±0.09)×10<SUP>-7</SUP>cm/s, propranolol의 투과계수는 (2.26±0.00)×10<SUP>-5</SUP> cm/s로 단층막의 integrity가 잘 형성되었음을 확인하였다. 고구마 색소 추출물의 단층막 투과도는 신자미 고구마로부터 얻은 안토시아닌 추출물의 경우, 처리 후 1, 2, 4, 6시간에서 각각 0.31×10<SUP>-6</SUP>, 1.57×10<SUP>-6</SUP>, 4.69×10<SUP>-6</SUP>, 5.16×10<SUP>-6</SUP> cm/s의 투과계수를 보였다. 추출물 중 12종의 주요 안토시아닌 성분들 각각의 투과율을 비교해보면, benzoic acid나 ferulic acid가 결합되어 있는 안토시아닌 성분보다 caffeic acid가 결합되어 있는 안토시아닌 성분들의 투과율이 높았다. 이러한 결과는 안토시아닌의 화학 구조상 peonidin이나 cyanidin 모핵에 결합한 당에 치환된 caffeic acid가 Caco-2 세포 단층막 투과율을 높이는 데 기여하는 것으로 볼 수 있다. 신황미 고구마로부터 얻은 카로티노이드 추출물은 처리 후 6시간까지 측정범위 내에서 카로티노이드 성분이 검출되지 않았다. 향후 카로티노이드 추출물에 대한 투과도 분석에서는 생체 내에서와 같은 유사한 상황을 적용하여 용해도를 최대한 증가시키거나 투과도 관찰 시간을 늘리는 등의 방법으로 반응시간에 따른 차이를 분석해볼 필요가 있다. Caco-2 human intestinal epithelial cells were used to determine the intestinal epithelial monolayer membrane permeability of the anthocyanin and carotenoid extracts from the purple- and yellow-flashed sweet potatoes, respectively. The permeability was analyzed at concentrations of 10 mg/mL of anthocyanin extract and 0.5 mg/mL of carotenoid extract without cellular toxicity. The Caco-2 cells were incubated for 25 days to form a monolayer on the Transwell filter. It was ensured that the membrane integrity of the monolayer was suitable for measuring the permeability in vitro by treatment with lucifer yellow and comparison with two markers, atenolol and propranolol. The permeability of lucifer yellow was 0.53% and the apparent permeability coefficients (Papp) of atenolol and propranolol were 6.01×10<SUP>-7</SUP> and 2.26×10<SUP>-5</SUP> cm/s, respectively, indicating that the monolayer was successfully formed. The Papp of the anthocyanin extract was 0.31×10<SUP>-6</SUP>, 1.57×10<SUP>-6</SUP>, 4.69×10<SUP>-6</SUP>, and 5.16×10<SUP>-6</SUP> cm/s for 1, 2, 4, and 6 hours, respectively. Analysis of the permeation rate on each of the twelve anthocyanins, 7 peonidins and 5 cyanidins in the extract showed that peonidins and cyanidins possessing caffeic acid present a higher permeability than those with ferulic acid or benzoic acid. However, cryptoxanthin, 13Z-β-carotene, all-trans-β-carotene, and 9Z-β-carotene in the carotenoid extract were not detectable within 6 hours of the incubation time.

초음파 금속 용착기를 이용한 Cu 박판의 용착성 실험

장호수(Ho Su Jang),박우열(Woo Yeol Park),박동삼(Dong Sam Park) 한국생산제조학회 2011 한국생산제조학회지 Vol.20 No.5

Ultrasonic metal welder is consisted of power supply, transducer, booster, and horn. Precise designing is required since each parts’ shape, length and mass can affect driving frequency and vibration mode. This paper analyzed Cu sheet deposition characteristics using ultrasonic metal welder and tension tester. A horn suitable for 40,000Hz was attached to the ultrasonic metal welder in order to weld Cu plates. The Cu sheet welding was done with different amplitude, pressure, and welding time, and its maximum tension was measured with tension tester. Maximum tension of 153.87N was obtained when the pressure was 2.0bar, amplitude was 80%, and welding time was 0.30s. Therefore, excessive welding condition negatively influences maximum tension measurement result.

Metabolic engineering of low-molecular-weight antioxidants in sweetpotato

김호수,Wenbin Wang,Le Kang,김소은,이찬주,박성철,박우성,안미정,곽상수 한국식물생명공학회 2020 Plant biotechnology reports Vol.14 No.2

Environmental stress leads to the production of reactive oxygen species (ROS) and consequently oxidative stress, which limits plant productivity. Thus, new crop cultivars that are able to overcome oxidative stress are required to address the global issues of environmental, food, and energy security. Sweetpotato ( Ipomoea batatas [L.] Lam) is considered an emerging multifunctional crop because of its high carbohydrate content and adaptation to marginal lands. Moreover, sweetpotato off ers several health benefi ts for the aging population, as it is rich in low-molecular-weight antioxidants (LMWAs) (e.g., carotenoids, ascorbate, tocopherols, and polyphenols), dietary fi ber, potassium, and minerals. We speculate that metabolic engineering of LMWAs in sweetpotato will lead to the development of smart cultivars with enhanced levels of antioxidants and abiotic stress tolerance. This review describes the current status of metabolic engineering of LMWAs in sweetpotato and the potential of sweetpotato in ensuring food and nutrition security in the twenty-fi rst century. Here, we focus on carotenoids, ascorbate, tocopherols, and polyphenols including anthocyanins in transgenic sweetpotato plants. Additionally, we discuss the potential role of the sweetpotato Orange ( IbOr ) gene, involved in carotenoid accumulation and stress tolerance, in improving crop productivity under the changing global climate and alleviating the problem of vitamin A defi ciency. Genetic engineering of the biosynthetic and metabolic genes of LMWAs in sweetpotato is currently under investigation via molecular breeding. We predict that metabolic engineering of antioxidants in sweetpotato will lead to the development of new cultivars with enhanced nutritional value and abiotic stress tolerance, which will ensure global food and nutrition security in the face of climate change.

뼈째 포함한 전어 무섞박지 김치의 발효 중 이화학적 품질 특성 연구

박인명,송호수,조성순 한국식품과학회 2018 한국식품과학회지 Vol.50 No.6

We examined the physicochemical characteristics of radish kimchi supplemented with either 10% boneless or boned sliced gizzard shad (BLGS and BGS, respectively) and compared them to those of untreated kimchi during an eightweek fermentation period. BLGS- and BGS-containing kimchi showed higher acidity, amino nitrogen, and Lactobacillus levels than control kimchi. Furthermore, BGS-containing kimchi showed higher acidity, amino nitrogen, and Lactobacillus levels, and lower reducing sugar contents than BLGS at the optimum- and over-ripened stage. Higher amino nitrogen serves as a good medium for microorganism growth, which produce organic acids, consequently decreasing the reducing sugar, pH levels and increasing the acidity. The preference test showed that the control kimchi was the most preferred at the unripened stage, while the BLGS- and BGS-supplemented kimchi samples in the ripened and over-ripened stages showed similar preferences. In conclusion, our results indicate that gizzard shad-supplemented kimchi shows positive health characteristics, such as low salinity, high amino nitrogen and Lactobacillus levels.

초음파 금속 용착용 40kHz 혼의 설계와 용착성 평가

장호수(Ho Su Jang),박우열(Woo Yeol Park),박동삼(Dong Sam Park) 한국기계가공학회 2013 한국기계가공학회지 Vol.12 No.2

The horn is a key part of the ultrasonic welder. As the shape, mass and material of a horn have effects on the resonant frequency and the vibration mode in ultrasonic welding, a horn has to be designed and manufactured accurately. In this study, 40kHz band horn was designed and manufactured through the vibration mode and finite element analysis. A result of modal analysis showed that the natural frequency of the horn was 39,794Hz, and the frequency response by a harmonic response analysis was 39,800Hz - close to the intended frequency, 40kHz. In addition, weldability of the developed horn was estimated by welding of two Ni sheets and tensile-shear test of welded samples. It was shown the developed horn could be used in metal sheet welding.

초음파 금속 용착기를 이용한 Cu 박판의 접합성 평가

박우열(Woo-Yeol Park),장호수(Ho-Su Jang),박동삼(Dong-Sam Park) 한국기계가공학회 2012 한국기계가공학회지 Vol.11 No.2

Ultrasonic metal welder is consisted of power supply, transducer, booster, and horn. Precise designing is required since each part"s shape, length and mass can affect driving frequency and vibration mode. This paper gives a description of an experimental study of the ultrasonic welding of metals. A horn suitable for 40,000Hz was attached to the ultrasonic metal welder in order to weld Cu sheet. The Cu sheet welding was done with different amplitude, pressure and welding time, and its maximum tension was measured. Maximum tension of 177.99N was obtained when the pressure was 2.5bar, amplitude was 80%, and welding time was 0.34sec. Therefore, excessive welding condition negatively influences maximum tension measurement result.

초음파 식품 컷팅용 공구의 설계

박우열(Woo-Yeol Park),장호수(Ho-Su Jang),김정호(Jung-Ho Kim),박동삼(Dong-Sam Park) 한국기계가공학회 2012 한국기계가공학회지 Vol.11 No.3

The ultrasonic cutting method is which cutting by applying high frequency vibrational energy into specific area at constant pressure. Ultrasonic cutting is consisted of power supply, transducer, booster and cutting tool. Precise designing is required since each part"s shape, length and mass can affect driving frequency and vibration mode. This paper focused to cutting tool design, its length L was set by calculating vibration equation. And the value of the shape parameter a was diversified as the integral multiple and the result of 40,189Hz the analysis of Modal was shown in the length 30mm of the result of performance b in the 11th mode Also by performing harmonic response analysis, the frequency response result was 40,189Hz, which was similar to modal analysis result.