http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박경현,변영태,김명욱,김선호,최상삼,조욱래,박승한,김웅,Park, K. H.,Byun, Y. T.,Kim, M. W.,Kim, S. H.,Choi, S. S.,Cho, W. R.,Park, S. H.,Kim. U. 한국광학회 1997 한국광학회지 Vol.8 No.2
가로.세로의 비가 큰 광도파로 소자 제작용 마스크 제작에는 레이저 리소그래피 장치가 기존의 리소그래피 장치에 비해 비용면 등을 고려하면 많은 장점을 가지고 있다. 레이저 리소그래피 장치를 이용 보편적인 양극형 마스크는 물론 기존의 레이저 리소그래피 장치로는 제작하기에 많은 어려움이 있는 음극형 마스크를 포토레지스트의 인위적 변화를 이용 제작할 수 있었다. 제안된 방법은 주변환경 즉 먼지, 장치의 진동 그리고 레이저 입사광 변화 등에 기존의 장치 보다 덜 민감함을 실험적으로 확인하였다. 이 방법을 이용 광도파로 소자의 기본을 이루는 S형태 곡선으로 구성된 광분배기 패턴을 제작하였으며, 제작된 패턴의 대비 및 재현성에 있어서 그 특성이 매우 우수함을 실험적으로 확인하였다. Most conventional lithography systems have been oriented to fabricate electronic devices. Therefore, it is not so easy to fabricate large aspect ratios of waveguide patterns with those systems. When considering costs and efficiencies, a laser lithography system provides number of benefit in realizing waveguide patterns. However, because the conventional laser lithography system could make only positive tone masks, it is inconvenient in determining the direction of the waveguide. A simple and reliable technique to produce negative tone masks was developed by using the laser beam writing. This technique was not sensitive to environmental situations such as dust, vibration, intensity variation. Making use of the technique a variety of device patterns such as Y-branch, directional coupler, and highly smooth S-shape bend could be successfully fabricated with a good contrast.
박경현,Park, K.H. 한국전자통신연구원 2008 전자통신동향분석 Vol.23 No.6
화석연료 사용에 따른 클린에너지 및 "carbon footprint" 절감을 위해 태양광발전과 같은 직접적인 에너지 대안기술에서부터 조명 및 표시소자로서의 LED 고효율화 기술, 레이저를 이용한 비접촉성, 고속, 초정밀 측정 기술을 바탕으로 하는 공정 관리기술, 그리고 오염원검출 및 추출기술 관련 등 그린 포토닉스 기술 활용에 관심이 급증하고 있다. OIDA 보고 2010년경 100억 달러 수준의 부품시장이 형성될 것으로 예측되는 그린 포토닉스 분야의 기술개발 동향을 설명한다.
광통신용 1.3 ㎛ Ridge Waveguide Distributed Feedback Laser Diode의 제작과 특성 평가
박경현(K. H. Park),이중기(J. K. Lee),장동훈(D. H. Jang),유지범(J. B. Yoo),강승구(S. K. Kang),김홍만(H. M. Kim),이용탁(Y. T. Lee),박형무(H. M. Park),조호성(H. S. Cho),홍창희(T. Hong) 한국광학회 1994 한국광학회지 Vol.5 No.1
발진파장이 1.3 ㎛인 Ridge Waveguide Distributed Feedback Laser Diode(RWG-DFB-LD)를 제작하고 특성을 평가하였다. 회절격자 형성은 광간섭무늬 노광법을 이용하였고 결정성장은 LPE로 수행하였다. 제작된 RWG-DFB-LD의 발진 임계전류는 67 ㎃이었고, 1296.5 ㎚ 파장에서 측모우드 억제율 30 dB 이상으로 단일 종모우드로 발진하였다. 금지대역폭 측정에 의한 회절격자 결합계수(k)는 40 ㎝-¹로 평가되었다. 소신호 변조특성평가 결과 제작한 RWG-DFB-LD는 1.2 Ith에서 1.99 ㎓의 변조대역폭(f_(-3dB)) 특성을 보였다. We fabricated and characterized RWG-DFB-LDs emitting at 1.3 ㎛ wavelength. For fabrication of the laser diode, inteference fringe of optical beams was used for grating formation and epi layers were grown by LPE. The fablicated RWG-DFB-LD operated in a single longitudinal mode with more than 30 dB SMSR at 1296.5 ㎚ emitting wavelength and its threshold current was 67 ㎃. Coupling coefficient (k) was estimated as 40 ㎝-¹ by means of stop-band measurement. Finally, we show that the RWG-DFB-LD fabricated in this experiment can be applicable as light source of 2.5 Gbps optical communication system from the fact that the small signal response of the RWG-DFB-LD rated up to 1.99 ㎓ at pre-bias level of 1.2Ith.
2.5 Gbps 광통신용 Distributed Feedback Laser Diode(DFB - LD) 모듈 제작 및 광송신 실험
박경현(K. H. Park),강승구(S. G. Kang),송민규(M. K. Song),이중기(J. K. Lee),조호성(H. S. Cho),장동훈(D. H. Jang),박찬용(C. Y. Park),김정수(J. S. Kim),김홍만(H. M. Kim),박형무(H. M. Park),한정희(J. H. Han),심창섭(C. S. Shim) 한국광학회 1994 한국광학회지 Vol.5 No.3
DFB-LD 칩으로부터 단일모드 광섬유 부착 2.5 Gbps 광통신용 광원인 DFB-LD 모듈을 설계, 제작하였다. DFB-LD 모듈은 광 isolator가 삽입된 2 렌즈 quasi confocal 광학계로 구성된 원통형 서브 모듈과 14 pin butterfly 패키지가 분리된 구성으로서 이들 사이의 전기적 연결은 bias-T 회로가 형성된 하이브리드 기판으로 이루어지도록 설계하였다. 모듈 제작시 정밀한 부품 고정이 요구되는 서브 모듈 조립에는 레이저 웰딩 방법을 사용하였다. 제작된 DFB-LD 모듈은 광결합 효율 20%, -3dB 소신호 변조 대역폭 2.6 ㎓ 이상의 특성을 가졌으며, 온도 순환검사에도 10% 이내의 광출력 변동만을 보임으로써 기계적 신뢰성을 확인할 수 있었다. 제작된 DFB-LD 모듈의 광송신 성능을 실제 2.5 Gbps 광통신 시스템의 광원으로 적용하여 평가한 결과 47 ㎞의 광섬유 전송시 BER 1×10^(-10) 조건에서 최대 -30.2 dBm의 수신감도를 얻었으며, 이 때 전송페널티는 소광비에 의한 것이 1.5 dB, 분산에 의한 것이 1.0 dB로 나타났다. We designed and fabricated the single mode fiber pigtailed DFB-LD module for 2.5 Gbps optical communication system. In the design of the DFB-LD module, we made the module divided into two parts of inner sub-module and outer 14-pin butterfly package and cylindrical shaped sub-module contain quasi confocal 2 lens system including optical isolator and electrical connection between these parts via hybrid substrate of bias T circuit.<br/> Laser welding was used to assemble the sub-module which requires accurate fixing between optical elements. The fabricated DFB-LD module showed optical coupling efficiency of 20% and -3 dB small signal response of more than 2.6 ㎓. We confirmed mechanical reliability of the module by temperature cycle test where the tested module exhibit optical power fluctuation of less than 10%. Finally we evaluated the performance of the fabricated DFB-LD module as light source of 2.5 Gbps optical communication system, sensitivity of -30.2 dBm was obtained through 47 ㎞ optical fiber transmission under the criterion of 1×10^(-10) BER and transmission penalties were 1.5 dB caused by extinction ratio and 1.0 dB caused by chromatic dispersion of normal single mode fiber.
RDAPS Sea Wind Model을 이용한 해상풍력발전단지 최적 Macro-Siting
이기학(K.H. Lee),전상욱(S.O. Jun),박경현(K.H. Park),이동호(D.H. Lee),박종포 한국전산유체공학회 2011 한국전산유체공학회 학술대회논문집 Vol.2011 No.5
This paper introduces the optimum macro-siting of a potential site for an offshore wind farm around Jeju Island using the RDAPS sea wind model. The statistical model was developed by analyzing the sea wind data from RDAPS model, and the meso-scale digital wind map was prepared. To develop the high resolution spatial calibration model, Artificial Neural Network (ANN) models were used to construct the wind and bathymetric maps. Accuracy and consistency of wind/bathymetric spatial calibration models were obtained using analysis of variance. The optimization problem was defined to maximize the energy density satisfying the criteria of maximum water depth and maximum distance from the coastline. The candidate site was selected through Genetic Algorithm(GA). From the results, it is possible to predict roughly a candidate site location jar the installation of the offshore wind farm, and to evaluate the wind resources of the proposed site.
광통신용 1.55 ㎛ PBH - DFB - LD 스펙트럼 특성
장동훈(D. H. Jang),이중기(J. K. Lee),이승원(S. W. Lee),박경현(K. H. Park),김정수(J. S. Kim),김홍만(H. M. Kim),황인덕(I. D. Hwang),박형무(H. M. Park),조호성(H. S. Cho),홍창희(T. Hong) 한국광학회 1994 한국광학회지 Vol.5 No.1
LPE와 간섭노광법을 이용하여 1.55 ㎛ 파장의 InGaAsP/InP PBH-DFB-LD를 제작하고 스펙트럼 특성을 평가하였다. 제작된 PBH-DFB-LD의 발진 임계전류는 15 ㎃ 이하이며, 1.55 ㎛ 파장에서 광출력 7 ㎽ 이상까지도 단일 종모우드로 동작하였으며 측모우드 억제율 35dB 이상을 얻었다. 본 연구에서 제작된 PBH-DFB-LD 발진파장의 온도 의존 특성은 0.9Å/℃이며, 금지대역폭 측정에 의한 회절격자의 결합계수(k)는 97 ㎝-¹로 평가되었다. PBH-DFB-LD emitting at 1.55 ㎛ wavelength has been fabricated for 2.5 Gbps optical fiber communications. For fabrication of PBH-DFB-LD, inteference expose for grating formation and 3-step LPE epitaxial growth was used. Fabricated PBH-DFB-LD operates in single longitudinal mode with more than 35dB SMSR and its threshold current is less than 15 ㎃. The operating wavelength is 1530~1550 ㎚ with the temperature dependence of 0.9Å/℃. Coupling coefficient(k) was estimated as 97 ㎝-¹ by means of stop-band measurement. PBH-DFB-LD fabricated in this experiment can be applicable as light source for 2.5 Gbps optical fiber communication system.
김형환,원희선,오병택,이상민,박경현,이지현,양경아,이원재,허성진,정문영,김원영,전성익,최완,Kim, H.H.,Won, H.S.,Oh, B.T.,Lee, S.M.,Park, K.H.,Lee, J.H.,Yang, K.A.,Lee, W.J.,Hur, S.J.,Chung, M.Y.,Kim, W.Y.,Jun, S.I.,Choi, W. 한국전자통신연구원 2009 전자통신동향분석 Vol.24 No.4
최근 국내 소프트웨어 시장에서 소프트웨어를 서비스로 사용하는 SaaS에 대한 관심이 부각되고 있다. 본 고에서는 SaaS의 정의와 개념을 살펴보고 핵심기능인 멀티테넌시를 구현하기 위한 참조모델을 소개한다. 또한, 해외 및 국내의 개발 사례를 알아보고 국가 플랫폼 과제의 일환으로 2009년부터 한국전자통신연구원에서 수행하는 SaaS 플랫폼 개발과제를 소개하며 앞으로의 SaaS 플랫폼 개발을 전망해 본다.