http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : 민상윤 (검색결과 49 건)
- 무료
- 기관 내 무료
- 유료
-
-
-
터널의사결정체계 (DAT)를 이용한 도로터널의 시공 시뮬레이션 연구
민상윤,김택곤,이준석,김호영,Min, Sangyoon,Kim, Taek Kon,Einstein, H.H.,Lee, Jun S.,Kim, Ho Young 한국터널지하공간학회 2003 터널기술 Vol.5 No.2
터널의사결정체계중의 하나인 DAT기법의 효용성 평가를 위해서 현재 시공중인 2차로 병설터널현장에 적용하였다. 이를 위해 지질조건, 굴착패턴, 설계단가 등으로부터 지질모듈과 시공모듈 자료를 입력하고, 병설터널 시공과정 모사를 위해 위치별로 다양한 시뮬레이션을 수행하였다. 그 결과 다양한 공기-공사비 분포를 얻을 수 있었으며, 각 시공과정마다 각기 다른 분포 특성을 분석하였다. "each cycle" 시뮬레이션은 공기분포에 비해 공사비의 불확실성 분포가 더 크게 나타났으며, "one time" 시뮬레이션에 비해 공기분포의 불확실성은 작게 나타남을 알 수 있었다. 향후 현장자료의 지속적인 갱신과 다양한 매개변수 연구를 통해 이러한 불확실성을 줄여나갈 것이다. Applicability of the Decision Aids for Tunneling (DAT) technique is investigated in this study to better understand the efficiency of the decision making process during tunnel construction. For this, a traffic tunnel under construction is adopted and information on the construction procedure, i.e., overall geology, unit cost and construction time for each excavation process, is provided periodically. Various scattergrams in which cost-time simulation results are plotted are obtained according to the simulation methods and final prediction on the construction time/cost is made. It is found that the uncertainty in the cost distribution is greater than the uncertainty in the time distribution for each cycle simulation and the uncertainties in time and cost for the one time simulations are comparable. Future work will be concentrated on the updating scheme using the face mapping data and various parametric studies will also be performed.
-
-
터널의사결정체계 (DAT)를 이용한 도로터널의 시공 시뮬레이션 연구
민상윤,김택곤,H.H.Einstein,이준석,김호영 사단법인 한국터널지하공간학회 2003 한국터널지하공간학회논문집 Vol.5 No.2
Applicability of the Decision Aids for Tunneling (DAT) technique is investigated in this study to better understand the efficiency of the decision making process during tunnel construction. For this, a traffic tunnel under construction is adopted and information on the construction procedure, i.e., overall geology, unit cost and construction time for each excavation process, is provided periodically. Various scattergrams in which cost-time simulation results are plotted are obtained according to the simulation methods and final prediction on the construction time/cost is made. It is found that the uncertainty in the cost distribution is greater than the uncertainty in the time distribution for each cycle simulation and the uncertainties in time and cost for the one time simulations are comparable. Future work will be concentrated on the updating scheme using the face mapping data and various parametric studies will also be performed. 터널의사결정체계중의 하나인 DAT기법의 효용성 평가를 위해서 현재 시공중인 2차로 병설터널현장에 적용하였다. 이를 위해 지질조건, 굴착패턴, 설계단가 등으로부터 지질모듈과 시공모듈 자료를 입력하고, 병설터널 시공과정 모사를 위해 위치별로 다양한 시뮬레이션을 수행하였다. 그 결과 다양한 공기-공사비 분포를 얻을 수 있었으며, 각 시공과정마다 각기 다른 분포 특성을 분석하였다. “each cycle” 시뮬레이션은 공기분포에 비해 공사비의 불확실성 분포가 더 크게 나타났으며, “one time” 시뮬레이션에 비해 공기분포의 불확실성은 작게 나타남을 알 수 있었다. 향후 현장자료의 지속적인 갱신과 다양한 매개변수 연구를 통해 이러한 불확실성을 줄여나갈 것이다.
-
민상윤,오욱 인간식물환경학회 2020 인간식물환경학회지 Vol.23 No.5
Background and objective: Moth orchids in the vegetative stage are suitable for a multi-layer growing environment in a closed-type plant factory which can be a good alternative that can reduce production costs by reducing cultivation time and energy cost per plant. This study was conducted to find out the optimal rhizospheric environment for different irrigation methods without a potting medium and rhizospheric ventilation for the vegetative growth of young Phalaenopsis hybrid ‘Blanc Rouge’ (P. KV600 × P. Kang 1) and Phalaenopsis Queen Beer ‘Mantefon’ in a closed-type plant factory system. Methods: The one-month-old clonal micropropagules with bare roots rapped with a sponges were fixed on the holes of styrofoam plates above growth beds, and were watered using the ebb-and-flow (EBB) and aeroponic (AER) methods with Ichihashi solution (0.5 strength) once a day at 06:00 (P) or 18:00 (S), and both (PS). Rhizospheric ventilation (V) was also applied to change the temperature, relative humidity, and CO2 concentration of the beds. Plants potted into sphagnum moss and watered once a week were used as the control group. Results: After 12 months of treatment, the growth characteristics of the EBB groups were the best among the treatment groups without a medium, but no effect of irrigation timing was observed. V reduced the temperature, relative humidity and CO2 concentration of the beds. Whereas, EBB+V (ebb-and-flow with ventilation) improved plant growth and reduced the occurrence of disorders and withering. Especially, EBB+V showed a similar performance to the control group. Conclusion: The results indicated that the optimal irrigation method without a potting medium for producing middle-aged potted moth orchids was the EBB system with forced rhizospheric ventilation. Therefore, further studies on the optimal ventilation method and moisture control of the crown need to be carried out to develop the irrigation system without a potting medium for vertical farming in closed-type plant factories.
-
민상윤,김보명,윤해근,정재학,오욱,오욱 인간식물환경학회 2022 인간식물환경학회지 Vol.25 No.6
Background and objective: For a successful application of agrivoltaic (AV) system, decrease in crop productivity must be minimized while achieving power generation. In this study, changes in microenvironments, crop growth and quality under the AV panels were investigated for kimchi cabbage. Methods: On September 1, 2021, kimchi cabbage (Brassica rapa ssp. pekinensis) 'Bulam No. 3' was planted in the soil under the AV panels and in an open field for the control, and grown using a conventional method. Growth characteristics and internal components after 16 weeks were analyzed. Results: There was no difference in air temperature and relative humidity, however daily light integral (DLI) and soil temperature under the AV panels were lower than the control. Under the AV panels, plant width was lesser and plant height and head height were greater than the control. Head shape index and leaf number of the AV panel plot were greater than in the control. Trimming loss rate was lower but chlorophyll content was higher in the AV panel plot. Head hardness was lower in the AV panel plot, while head fresh weight was greater but head dry weight was smaller in the AV panel plot: therefore, moisture content was greater than the control. Marketable crop yield and heading rate was higher in the AV panel plot. Conclusion: The environmental changes caused by AV panels including the DLI and soil temperature induced a larger fresh weight, higher heading and trimming loss rates because a relatively good environment was created in the early crop stage which was the period of high temperature and DLI. However, the lower DLI of the latter period had a rather negative effect, resulting in an elongated shape, smaller dry weight, and shorter shelf life.
-
-
철과 망간이 동시에 코팅된 반응성 매질을 이용한 용존 Fe(2) 제거
민상윤(Sang Yoon Min),장윤영(Yoon Young Chang),양재규(Jae Kyu Yang) 大韓環境工學會 2011 대한환경공학회지 Vol.33 No.2
본 연구에서는 산화망간과 산화철이 단독 및 복합 코팅된 반응성매질인 망간코팅사(MCS), 철코팅사(ICS) 그리고 철-망 간코팅사(IMCS)를 이용하여 용존 Fe(II)의 산화 및 제거능을 평가하였다. 반응성매질에 KMnO₄와 NaOCl를 추가적인 산화제로 이용하였을 때의 Fe(II) 제거능을 반응용액의 pH, 반응시간, Fe(II) 농도변화에 따라 조사하였다. 반응성매질 및 추가적인 산화제 없이 Fe(II) 용액만을 사용한 경우, pH 5 이하에서는 Fe(II)의 느린 산화에 의해 제거율이 낮았으나 이후에는 빠른 산화 및 침전반응에 의해 제거율이 증가하였다. ICS만을 사용하였을 때 ICS 표면에 의한 Fe(II)의 제거는 극히 제한적인 것으로 나타났다. 망간 산화물이 코팅된 IMCS와 MCS를 사용한 경우 낮은 pH에서도 Fe(II)가 산화망간에 의해 산화되었으며 용액으로부터 효과적으로 제거되는 것으로 나타났다. Fe(II)는 IMCS만 단독으로 사용했을 때와 NaOCl을 산화제로 사용했을 때 제거율에서 큰 차이가 나지 않았다. IMCS와 산화제를 이용하여 Fe(II)을 제거할 경우, 용액의 pH가 증가함에 따라 이들의 산화능이 증가하였고 이로써 전체 제거율의 증가를 가져왔다. Fe(II)의 제거에 관한 반응속도 실험결과 유사-1차 반응 보다는 유사-2차 반응 식으로 더 잘 표현되었으며 KMnO₄를 추가적인 산화제로 이용한 경우 Fe(II)는 14,286 mg/kg·hr의 높은 초기 제거율(h)을 보였다. KMnO₄ 주입 시 반응시간 10분 안에 제거평형에 도달하였고 NaOCl의 경우는 6시간 후에 거의 제거평형에 도달하는 것으로 나타났다. IMCS에 의한 Fe(II)의 최대 제거량 값을 구하기 위해 pH 4에서 Langmuir 등온식에 적용한 결과 1,088 mg/kg의 제거량을 보였다. Evaluation of the removal efficiencies of Fe(II) by reactive sand media coated with manganese (MCS), iron (ICS) and both of iron and manganese (IMCS) was investigated as functions of solution pH ranging from 2 to 9, reaction time and concentration of Fe(II) in a batch reactor using each reactive medium and additional oxidants such as KMnO₄ and NaOCl. When only Fe(II) was present in solution without any reactive medium, removal of Fe(II) was quite low below pH 5 due to a slow oxidation of Fe(II) and/or negligible precipitation but greatly increased above pH 5 due to a rapid oxidation of Fe(II) and subsequent precipitation of oxidized Fe species. ICS showed negligible efficiency on the removal of Fe(II) through adsorption. However, an efficient removal of Fe(II) was observed at low solution pH in the presence of IMCS or MCS through rapid oxidation and subsequent precipitation. Removal efficiency of Fe(II) by IMCS in the presence or absence of NaOCl was quite similar. Removal rate of Fe(II) by IMCS and additional oxidants gradually increased as the solution pH increased. From the kinetic experiments, removal pattern of Fe(II) was better described by pseudo-second-order equation than pseudo-first-order equation. A rapid removal of Fe(II) using IMCS in the presence of KMnO₄ was observed in the first 10 min. The initial removal rate of Fe(II) using KMnO₄ was 14,286 mg/kg·hr. In case of using NaOCl, the removal of Fe(II) occurred rapidly in the first 6 hrs and then reached the near-equilibrium state. Removal of Fe(II) on IMCS was well expressed by Langmuir isotherm and the maximum removal capacity of Fe(II) was calculated as 1,088 mg/kg.
-
연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
