RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
          펼치기
        • 학술지명
          펼치기
        • 주제분류
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        냉각제의 분사조건 및 상변화가 혼합가스 사출시스템의 성능에 미치는 영향

        김현묵,김정수 한국추진공학회 2018 한국추진공학회지 Vol.22 No.6

        냉각제 분사조건이 변화할 때 혼합가스 사출시스템 (또는 가스-스팀 발사체계) 냉각효율 및 발사체사출성능의 변화를 확인하기 위해 3차원 수치모사를 수행하였다. 선행연구를 참조하여 구축한 1차원 모델을 통해 3차원 단상(single-phase) 계산모델을 검증한 후, Discrete Phase Model을 활용하여 고온의 기체에 냉각제 분사를 모사한 이상(two-phase) 유동 계산을 수행하였다. 냉각제 유량과 분사구 개수를 각각 변화시키면서 계산을 수행한 결과, 분사구 개수를 증가시켰을 경우 냉각효율이 보다 개선되었다. 또한 분사조건에 따라 냉각제 액적 서로간의 coalescence 발생 빈도 및 공간분포 변화가 발생하여 액적의 직경이 달라졌고, 이는 냉각제 증발률에 영향을 미쳤다. 냉각제의 증발은 breech 내부의 온도를 감소시키는 반면에 압력감소를 억제하여 사출시스템 최적화 설계에 있어 중요한 요소임을 확인하였다. Three-dimensional (3D) numerical simulations have been carried out to study how coolant injection conditions influence the cooling efficiency and projectile ejection performance in a mixture-gas ejection system (or gas-steam launch system). The 3D single-phase computational model was verified using a 1D model constructed with reference to the previous research and then a two-phase flow computation simulating coolant injection on to hot gas was performed using a DPM (Discrete Phase Model). As a result of varying the coolant flow rate and number of injection holes, cooling efficiency was improved when the number of injection holes were increased. In addition, the change of the coalescence frequency and spatial distribution of coolant droplets caused by the injection condition variation resulted in a change of the droplet diameter, affecting the evaporation rate of coolant. The evaporation was found to be a critical factor in the design optimization of the ejection system by suppressing the pressure drop while the temperature decreases inside the breech.

      • 레이저를 이용한 얇은 원통형 튜브에서의 유도초음파 발생

        김현묵,정경일,장경영,안형근,곽노권,이창목 한국비파괴검사학회 2003 학술대회 논문집 Vol.- No.1

        레이저를 이용하여 두께가 얇은 원통형 튜브에 유도초음파를 발생하고, 공기-결합 트랜스듀서를 이용하여 비접촉식으로 수신하였다. 원통형 튜브는 발전설비의 열교환기 및 증기발생기 튜브에 사용되는 인코넬(Inconnel)튜브이다. 레이저의 조사 경로에 선 배열 슬릿을 삽입하여 유도 초음파의 파장을 조절하였다. 파장이 일정할 때 발생되는 모드를 이론적인 분산선도로부터 예측하고, 예측된 위상속도로부터 공기-결합 트랜스듀서의 경사각을 결정하였다. 원통형 튜브에는 축대칭 모드가 지배적으로 발생하는 것으로 나타났다. 이러한 결과는 웨이블렛 변환에 의한 시간-주파수 선도와 이론적인 분산선도를 비교한 결과 증명되었다.

      • 호텔 뷔페레스토랑의 효율적인 운영방안에 관한 연구

        김현묵 경북과학대학 2001 金龜論叢 Vol.8 No.1

        메뉴의 관리는 고객의 요구와 욕구의 만족과 기업의 이윤의 추구라는 메뉴관리의 양면성을 동시에 충족시켜야 하는 과제를 안고있다. 본 연구는 상설뷔페레스토랑의 활성화를 위한 제 요인 중 메뉴관리측면에 그 초점을 두고 진행하였는데, 제 1장에서는 연구의 배경, 목적, 방법, 범위 등에 대하여 서술하였다, 제 2장에서는 호텔레스토랑 및 상설뷔페레스토랑과 메뉴계획 및 메뉴관리에 대한 이론적인 고찰을 하였다. 제 3장에서는 상설뷔페의 활성화를 위한 메뉴관리의 기준과 방안을 제시하기 위하여 대구 서울 부산의 3개 지역의 메뉴 및 경영자료를 수집하였다. 메뉴내용을 관리함에 있어 경쟁 호텔과 타 지역의 메뉴내용의 관리실태를 파악하지 않고는 진행되는 메뉴내용의 관리상태를 알 수 없으며 메뉴내용은 호텔상설뷔페에 있어 아주 중요한 작용을 하고 있기 때문이기도 하다. 많은 호텔이 상설뷔페레스토랑을 운영하고 있지만 제공메뉴의 수는 몇 가지가 되는지, 또는 몇 개국의 요리가 제공되며 재료별 내용은 어떠한지, Hot Food과 Cold Food의 내용 및 종류와 Salad 및 Dessert의 내용과 종류는 타 호텔에 비하여 손색이 없는지에 대한 기준이 없다. 메뉴의 내용적인 면이 잘 짜여지면 Cost의 상승으로 기업의 이익창출에 실패하게 되고 또 한편으로는 부실하게 짜여지면 고객의 불만을 사게 되어 고객을 잃는 결과를 초래하게 될 것이다. 제 4장은 3장에서 조사된 자료를 토대로 실제 조사 및 분석을 하였는데 그 내용은 경영인 측면과 메뉴 내용적인 측면으로 나누어 대구 지역을 중심으로 하여 서울과 부산을 각각 비교, 분석을 하였다. 첫째 메뉴 내용적인 측면에서의 분석은 이는 전체 메뉴의 수, 메뉴속성별 내용으로 분류하여 조사하여 비교분석을 하였다. 둘째, 경영 일반적인 측면에서 중식 석식의 평균요금, 호텔별 평균 Cost, 월별 및 일일 이용고객 수, 매출의 규모, 좌석의 수, 종사원의 수 등을 비교 분석하였다. 결론적으로 영업활성화를 위한 메뉴관리 방안의 제시와 시사점 및 연구의 한계를 제시하였다.

      • KCI등재

        모드 선택성을 강화한 비접촉식 유도초음파 기술

        김현묵,이태훈,장경영 한국비파괴검사학회 2004 한국비파괴검사학회지 Vol.24 No.6

        유도초음파의 현장적용에 있어 전파모드를 규명하는 것은 매우 어렵지만 중요한 과제이다. 본 연구에서 분산성이 적은 단일모드를 발생시키고 검출할 수 있는 기법에 대해 다루고 있으며, 현장 적용성과 자동화를 위해 비접촉식의 기법을 적용하였다. 모드 선택성을 강화한 비접촉식의 유도초음파 기법으로는 선배열 슬릿을 이용한 레이저 빔을 이용하였으며, 에어커플 변환기를 수신자로 사용하였다. 선배열의 레이저 조명은 파장과 일치하여 특정한 모드를 발생시킬 수 있다. 1 mm 두께의 알루미늄 판에 본 기법을 적용한 실험결과로부터 제안하는 기법의 유용성을 검증하였고, 특히 단일한 a_(0)모드의 발생 및 수신에 효과적인 기법으로 나타났다. In practical applications of guided wave techniques, it is very important but also difficult to identify the propagating modes, and it is preferred to generate and detect a single or less dispersive mode. Also the noncontact method is required in the automated field application. So this paper considers a non-contact guided wave technique with enhanced mode-selectivity, where a laser beam illuminated through arrayed line slits is used as the transmitter and the air-coupled transducer is used as the receiver. The line arrayed laser illumination is a wavelength matching technique that can generate only a few modes. The air-coupled transducer detects the leaky wave of the propagated guided wave, and by tuning its detection angle we can detect the selected single mode. Experimental results for a 1 mm thick aluminum plate proved the usefulness of the proposed method, and especially it was shown that this method was powerful in the generation and detection of the a_(0) mode.

      • Air-coupled 트랜스듀서를 이용한 배관에서의 유도초음파 모드 규명

        김현묵,박익근,김용권,장경영,조용상,조윤호 한국비파괴검사학회 2004 학술대회 논문집 Vol.- No.-

        발전설비의 중요한 요소인 배관의 효율적인 비파괴검사를 위해, comb 트랜스듀서를 이용하여 유도초음파를 발생하고 ACT(air-coupled transducer)를 적용하여 비접촉으로 수신하였다. comb 트랜스듀서의 요소간격과 이론적인 분산선도로부터 발생가능 한 모드가 예측되었다. 또한 예측된 모드를 수신하기 위해 각 모드의 이론적인 음속을 이용하여 ACT의 수신 각도를 결정하였다. 수신모드의 특성을 규명하기 위해 웨이블릿 변환과 2D-FFT를 이용한 시간-주파수해석을 수행하여 이론적인 분산선도와 비교하였다. 수신된 모드는 이론적으로 예측된 모드와 일치하는 것으로 나타났다.

      • KCI등재후보

        동일계 특별전형 전문대학 재학생의 학교생활에 관한 연구

        김현묵,정철영 한국농·산업교육학회 2003 농업교육과 인적자원개발 Vol.35 No.2

        The purposes of this study were to analyze the college lives of junior college students entered through the Admission Test of Same Majors, to identify the those life's problems and to provide some directions for the desirable college lives.The results of this study were followed:1. Records of college students enrolled by special admission for same majors were lower than those of the other students enrolled by general admission. Low record is a key factor of making students consider drop out in college.2. The satisfaction for the college lives of the students enrolled by special admission for same majors were higher than that of the students enrolled by general admission. The satisfaction for the department of the former was higher than the satisfaction for the college.3. The directions for the desirable college lives of the students enrolled by special admission for same majors are presented as followed.1) For the improvement of the class activities, college exploration programs showing college curriculums and class activities in vocational high schools are needed. Those programs should be closely related between vocational high school curriculums and junior college curriculums.2) In junior college, integrated club activities joined with majors should be founded. Major departments and professors should be key factors to conform and carry out club activities. 3) There should be a guidance system for the students' career in college such as part-time job, club activities and studies. College and departments should guide students in career exploration and planning through individual majors.4) Special programs related with vocational high school curriculums for obtaining qualifications should be suggested in college. Moreover college should help students who acquired qualifications in high school to get higher qualifications through college classes and club activities.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼