http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
배기가스 열회수를 고려한 1kW급 LNG 스털링 엔진 CHP 시스템 연소실 수치해석
김혁주(H.J. Kim),이윤식(Y.S. Lee),안준(J. Ahn) 대한설비공학회 2011 대한설비공학회 학술발표대회논문집 Vol.2011 No.7
The availability of the thermal energy has been deeply recognized recently to encourage the cascade usage of thermal energy from combustion. Within the framework, a 1 ㎾ class Stirling engine based cogeneration system has been proposed for a unit of a distributed energy system. The capacity has been designed to be adequate for the domestic usage, which requires high compactness as well as low emission and noise. To develop a highly efficient system with satisfying these requirements, effect of heat recovery to the exhaust gas to study the combustion
논문 : 노외기계시스템공학 ; 트랙터 PTO 출력과 농작업 부하 특성
김혁주 ( H. J. Kim ),김영중 ( Y. J. Kim ),박석호 ( S. H. Park ),임동혁 ( D. H. Im ),김성수 ( S. S. Kim ),김충길 ( C. K. Kim ),정상철 ( S. C. Jung ),이종순 ( J. S. Lee ) 한국농업기계학회 2010 바이오시스템공학 Vol.35 No.1
Tractor PTO output and fuel consumption rate under the korean paddy and various paddy operations were measured and analyzed, in which all the measurements were accomplished by the OECD tractor test codes and the collected information will be utilized for defining tractor energy efficiency class and its test methods. Tractor PTO performance tests were conducted under full-load, part-load and various engine RPMs with part-load at the engine laboratory, while the paddy operations were dry land plowing, wet and dry land rotary tilling and wet land preparation under various soils. As a whole, the rated tractor outputs were ranged from 17% to 100% in the various tillage and land preparation operations, however, the loads for the paddy operations of 1,700 to 2,000 rpm were very close to the OECD tractor load distribution thus it would be appropriate to adopt OECD tractor test codes to measure energy consumption efficiency of tractor.
유병기,김혁주,오권영,최광재,이성현,박환중,김병관,Yu B. K,Kim H. J.,Oh K. Y.,Choe K. J.,Lee S. H.,Park H. J.,Kim B. K. 한국축산환경학회 2005 축산시설환경학회지 Vol.11 No.1
1. 구획이 작고 논두렁이 많은 논의 볏짚 수집에 적합한 1축롤 구동 래핑암회전식 트랙터 3점히치 장착형 원형베일 래퍼를 개발하였다. 2. 2개의 구동롤을 구동하는 래핑암 회전식원형베일래퍼는 베일 적재시 베일에 변형이 발생하였으며 작업시 무게중심이 높아 기체 흔들림이 있었으나 시작기는 베일적재시 롤이 수평직선운동을 하여 베일의 변형이 적었으며 무게중심이 낮아 작업 안정성이 다소 높은 것으로 평가되었다. 3. 베일적재시에 두 개의 적재롤이 자유회전을 하여 적재시의 베일과 롤의 마찰저항을 구름저항으로 바꿈으로써 베일의 변형이 생기지 않았으며 베일을 회전시키기 위한 구동롤의 토크를 기존의 2축롤 구동식은 12 kgf-m 이었으나 새로 개발한 1축롤 구동식은 6 kgf-m로 낮았다. 4. 구동롤 토크가 낮아 1축롤 구동으로 베일래핑작업이 가능하였으며 기계구조를 단순화 킬 수 있었다. 5. 기존 회전테이블식에 비해 작업능률을 $45\%$ 향상, 작업비용은 $17\%$ 절감할 수 있었다. The round bale wrappers are generally used for rice straw after the harvesting of low land rice by combine harvester. In this situation, the bale wrappers should be well adapted under the travelling over raised borders and temporary ditches in soft soil of narrow rice fields. The study was conducted to improve the performance of bale wrapper through the new design for compact size, lowered gravity center and lowered power consumption. The prototype of round bale wrapper had been designed and assembled to tractor with three point hitch mounted. The machine type is one roll driving system with one roll for rotating and one roll for wrapping. The driving torque and work performance of the machines were measured and analysed. The torque requirement of the prototype and conventional type was 6kgf-m and 12kgf-m, respectively. The prototype shaved less friction resistance between bale driving roll and round bale. and the power requirement can also be reduced from 12kgf-m in the conventional to 6kgf-m in the prototype. The work efficiency of the new bale wrapper was $45\%$ higher than the conventional wrapper, and the working cost of the prototype can be reduced $17\%$ than that of the conventional.