http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
兪炳基 전주대학교 역사문화연구소 1997 전주사학 Vol.5 No.-
위에서 검토한 바와 같이 중앙귀족군은 고려사회를 주도해 나가는 특수계층이 되었다. 다시 말하면 이제 고려는 성종대를 기점으로 하여 귀족들이 정치를 주도해가는 귀족정치의 방향으로 가고 있었다. 따라서 모든 국가의 정책 입안도 바로 이 귀족들이 이해에 얽혀서 이루어져 가게 되었다. 그것은 시대가 흐름에 따라 그 심도를 더하게 되는 것이다. 그렇다고 하여 왕권의 부재를 말하는 것은 아니다. 왕권이 귀족세력의 밑받침 없이 독자적으로 존재할 수는 없었음을 말하는 것이다. 그렇기 때문에 국왕과 귀족들 간에는 타협의 유대관계를 가지고 존재하는 것이기 때문에 국왕은 결국 귀족들의 이해에 동조하고 그 속에서 왕권의 유지를 해 나갈 수밖에 없었던 것이다. 이와 같은 위치를 확보한 귀족들은 모든 시책을 자신들의 이해와 상관시키면서 추진해 나가리라는 것은 당연한 것이다. 그 중의 하나가 가장 고려적인 제도라고 하는 음서제도인 것이다. 물론 음서제는 우리가 일반적으로 알고 있는 바와 같이 오품 이상의 관리의 일자에게 음식을 주는 제도이다. 『고려사』세가, 세종조나,『고려사』권 75, 선거지, 성종조에는 중앙관직 오품 이상에 대하여 종종의 특별대우를 하도록 하였다는 기록을 찾아 볼 수가 있다. 그리하여 육품 이하와 특별히 구분하여 특별대우를 하고 있는 것이다. 이 음서제는 중앙관사 오품 이상자의 자제로 하여금 과거를 거치지 않고 특별히 관계에 진출할 수 있는 길을 터놓은 것일 진대 이것은 그들에 대한 특혜가 아닐 수 없다. 다시 말하면 일반적으로는 과거시험을 통하여 관계에 진출하는 것이지만 중앙귀족들 중 고급관리인 오품 이상 귀족에게만 특별히 부여된 제도였던 것이다. 그렇기 때문에 이 음서제는 귀족들이 관계에 진출하는 당연한 통로로서 승진에도 제한을 두지 않았던 것으로 고려와 같은 신분제 귀족사회에 존재하는 것이 가장 고려적인 제도라고 할 수 있는 것이다. 과거제 역시 이상과 같은 신분적 제도 속에서 이루어졌던 것이며 또한 그것은 기존 관사등용방법을 보강하는 입장에서 도입된 것이지 그것을 대체하려고 하였던 것이 아니었던 것이다. 그러한 관점에서 본다면 음서제의 시행도 어색한 것은 아니라고 본다. 고려와 같은 귀족중심의 신분제사회에서는 출세의 유일한 상징으로 자리하는 관직의 독점을 위한 시도라고 보아서 음서제는 당시 고려사회에 적합한 제도였을 것이라고 보아도 무방할 것이다.
자주식(自走式)퇴비교반기 개발을 위한 제조방법별 양송이 퇴비배지의 특성에 관한 연구
유병기,이성현,이찬중,김영호 한국버섯학회 2017 한국버섯학회지 Vol.15 No.3
A self-propelled turner was developed to produce mushroom compost at low costs and high efficiency, and the uniformity of compost produced by an excavator, compost mixer, and self- propelled turner was compared. The material of the compost was mixed with rice straw and chicken manure at a dry weight ratio of 3:1. After the final turning, internal temperature distribution, water content of the compost pile, ash ratio, and uniformity of the compost pile were examined. After the compost was completed, the water content was 69.9 ± 0.54%, 72.1 ± 0.15%, and 74.5 ± 0.82%, respectively. The length of rice straw was 47.5 ± 15.4 cm, 24.9 ± 10.1 cm, and 31.0 ± 10.6 cm, respectively. The ash content in the dry weight of each compost was 25.0 ± 6.2%, 33.6 ± 4.2%, and 28.2 ± 1.1%, respectively. The deviation in the length of rice straw was affected by the linear velocity of the spinner in the compost mixer and the self-propelled turner, which were 21.5 m/sec and 9 m/sec, respectively. As a result, the most uniform mushroom compost was produced by the self-propelled turner.
진공 정밀주조한 Inconel 713C 합금의 조직과 기계적 성질에 미치는 열처리의 영향
유병기,최학규,박흥일,정해용 한국주조공학회 2020 한국주조공학회지 Vol.40 No.2
The effect of a heat treatment on the microstructure and mechanical properties of Inconel 713C alloy vacuum investment castings were investigated. The microstructure of the as-cast state was observed, showing well-developed dendrite structures and distributed carbide particles and solidified massive precipitates in the grain or grain boundary during solidification, in this case the ′phase and MC particles. During a heat treatment, the phase matrix was reinforced by solid solution elements, carbide particles from the film morphology precipitated along the grain boundary, and many micro-precipitates of second ′phases 0.2 m~2 m in size were newly formed in the phase matrix according to SEM-EDS analysis results. The tensile strength at a high temperature (850oC) decreased slightly becoming comparable with the room-temperature result, while the hardness value of the specimen after the vacuum heat treatment increased by approximately 19%, becoming similar to that of the as-cast condition. However, the impact values at room temperature and low temperature (-196oC) were approximated; this alloy was mostly not affected by an impact at a low temperature. In the observations of the fracture surface morphologies of the specimens after the tensile tests, the fractures at room temperature were a mix of brittle and ductile fractures, and an intergranular fracture in the inter-dendrite structure and some dimples in the matrix were observed, whereas the fractures at high temperatures were ductile fractures, with many dimples arising due to precipitation. It was found that a reinforced matrix and precipitates of carbide and the ′phase due to the heat treatment hadsignificant effects, contributing greatly to the excellent mechanical properties.