http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박환중,유병기,이성현,이찬중,김영호 한국버섯학회 2018 한국버섯학회지 Vol.16 No.4
The windrow turner, widely used for outdoor fermentation of mushrooms in Europe, has been improved by using rice straw instead of wheat straw in accordance with Korea’s actual situation. It was compared with conventional excavator work, and the results were as follows. Agitation performance was 81 m3/hr, which was 2.8 times higher than 28.6 m3/hr of excavator. As a result of the temperature distribution in the pile at the end of the fermentation stage, it was found that the temperature at the lower part of the pile was 5oC higher than that of conventional pile. This was more favorable for aerobic fermentation. Meanwhile, ash ratio of prototype (30.9±1.1%) was higher than that of control 28.4±1.6%. In the case of prototype turner agitation, the yield of mushroom cultivation was 880 kg/66 m2, that was 22.9% higher than the conventional control yield of 716 kg/66 m2.
최광재,이성현,유병기,오권영,박환중,이상태,Choe K. J,Lee S. H.,Ryu B. K.,Oh K. Y.,Park H. J.,Lee S. T. 한국축산환경학회 2005 축산시설환경학회지 Vol.11 No.1
The study aimed to develop a tractor drawn animal slurry manure sub-soil injector for arable land and thus, can reduce the waste management cost through effective treatment and utilization of animal slurry manure. The application of animal slurry manure to agricultural land will probably be one of the most effective ways to enrich the soil with vital nutrients. However, some existing slurry manure spenders are not suitable in the field because of their adverse effects to the environment. Based on this premise, a prototype was designed and assembled using 5 sub-soiling standards attached to the sin injector device. The traction force of the Prototype measured in the depth of 10 cm and 15 cm from the ground surface of a paddy field was 1,062 kgf and 1,214 kgf, respectively. A unique feature of the machine was that there was an equal volume of slurry manure flowing from each delivery pipe and regulated by a pressurized container that was likewise synchronized with the speed of the tractor The sub-soiling manure injection system can mitigate or reduce the harmful emission of obnoxious gases and malodor during the injection operation. 1. 트랙터 삼점히치탑재형 지중살포기 가. 5련 치즐푸라우에 의해 토양 파쇄가 이루어지고 용적식 워블판 펌프에 의해 지중에 압송 살포하는 구조로 설계 제작되었다. 나 슬러리 가축분뇨살포기의 지중깊이별 축분살포기 견인력은 토앙파쇄 깊이 50mm에 비해 100mm일 때 550kgf에서 600kgf로 조금 증가하였으나 토양파쇄 깊이 150mm에서는 약 800kgf로 급격히 증가하였다. 다. 슬러리가축분뇨 송출장치로 오수펌프와 토출관 사이 압력조절탱크 설치로 분뇨토출 분지관의 살포균일성을 높일 수가 있었다. 2. 트랙터 견인형 지중살포기 가. 5련 치즐플라우에 의한 토양파쇄 후베인형 진공펌프에 의해 슬러리 가축분뇨를 지중에 압송 살포하는 장치로 제작되었다. 나. 슬러리 가축분뇨 지중살포기의 살포 깊이별 견인력은 반 건조 상태인 논 토양의 경우 지표살포 683kgf, 살포 깊이 l0cm에서 1,062kgf, 깊이15cm에서 1,214kgf로 나타났으며, 살포 깊이 20cm에서는 트랙터의 슬립발생 증가하여 작업이 곤란하였다. 다. 시작기의 밭 토양에서 견인력은 지표살포 784kgf, 살포 깊이 l0cm에서 997kgf, 깊이 15cm에서 1,320kgf, 깊이 20cm에서 1,670kgf로 나타나 살포 깊이가 증가함에 따라 견인력이 크게 증가하는 경향이었다. 라. 슬러리가축분뇨를 토양에 압송$\cdot$살포하는 송출관에 분배관 설치로 토출관간 슬러리가 축분뇨의 토출균일성을 높일 수 있었고, 송출관의 압력조절밸브를 조정하면 10a당 살포량 조절이 가능하였으며, 지중살포 깊이는 10${\~}$15 cm 수준이 적합한 것으로 판단된다.
유병기,김혁주,오권영,최광재,이성현,박환중,김병관,Yu B. K,Kim H. J.,Oh K. Y.,Choe K. J.,Lee S. H.,Park H. J.,Kim B. K. 한국축산환경학회 2005 축산시설환경학회지 Vol.11 No.1
1. 구획이 작고 논두렁이 많은 논의 볏짚 수집에 적합한 1축롤 구동 래핑암회전식 트랙터 3점히치 장착형 원형베일 래퍼를 개발하였다. 2. 2개의 구동롤을 구동하는 래핑암 회전식원형베일래퍼는 베일 적재시 베일에 변형이 발생하였으며 작업시 무게중심이 높아 기체 흔들림이 있었으나 시작기는 베일적재시 롤이 수평직선운동을 하여 베일의 변형이 적었으며 무게중심이 낮아 작업 안정성이 다소 높은 것으로 평가되었다. 3. 베일적재시에 두 개의 적재롤이 자유회전을 하여 적재시의 베일과 롤의 마찰저항을 구름저항으로 바꿈으로써 베일의 변형이 생기지 않았으며 베일을 회전시키기 위한 구동롤의 토크를 기존의 2축롤 구동식은 12 kgf-m 이었으나 새로 개발한 1축롤 구동식은 6 kgf-m로 낮았다. 4. 구동롤 토크가 낮아 1축롤 구동으로 베일래핑작업이 가능하였으며 기계구조를 단순화 킬 수 있었다. 5. 기존 회전테이블식에 비해 작업능률을 $45\%$ 향상, 작업비용은 $17\%$ 절감할 수 있었다. The round bale wrappers are generally used for rice straw after the harvesting of low land rice by combine harvester. In this situation, the bale wrappers should be well adapted under the travelling over raised borders and temporary ditches in soft soil of narrow rice fields. The study was conducted to improve the performance of bale wrapper through the new design for compact size, lowered gravity center and lowered power consumption. The prototype of round bale wrapper had been designed and assembled to tractor with three point hitch mounted. The machine type is one roll driving system with one roll for rotating and one roll for wrapping. The driving torque and work performance of the machines were measured and analysed. The torque requirement of the prototype and conventional type was 6kgf-m and 12kgf-m, respectively. The prototype shaved less friction resistance between bale driving roll and round bale. and the power requirement can also be reduced from 12kgf-m in the conventional to 6kgf-m in the prototype. The work efficiency of the new bale wrapper was $45\%$ higher than the conventional wrapper, and the working cost of the prototype can be reduced $17\%$ than that of the conventional.