A STUDY ON THE EFFECTS OF CHEWING PATTERNS TO OCCLUSAL WEAR

김성균,김광남,장익태,허성주,Kim, Seong-Kyun,Kim, Kwang-Nam,Chang, Ik-Tae,Heo, Seong-Joo The Korean Academy of Prosthodonitics 1996 대한치과보철학회지 Vol.34 No.1

저작은 치아, 악골, 저작근 뿐만 아니라 근 신경계, 고위 중추까지 복합적으로 관여되는 기능적 행위이다. 저작 형태는 다양한 모양을 가지나 두 가지 전형적인 군, 즉, 전방에서 관찰 시 그 양상이 수직적이며 절단 (chopping) 운동을 하는 군과 주로 측방으로 이루어지며 연마 (grinding)를 하는 군으로 나눌 수 있다. 본 연구의 목적은 저작 형태의 차이가 교합면 마모에 미치는 영향을 조사하는 것이다. 두개 하악 관절과 저작 습관에 이상이 없으며 교합면에 수복물이 없는 치과 대학생으로 하악 운동 궤적 기록기를 이용하여 상기의 전형적인 2가지 저작 형태를 보이는 각 15명씩을 피검자로 선택하였다. 각 피검자에 대한 임상 검사를 통해 ordinal scale로 교합면 마모의 등급을 조사하여, 평균 치아 마모도와 부위에 따른 치아 마모도를 비교 조사하였다. 각 피검자에 대한 인상 채득 후 모형을 제작하고 arbitrary scale로 교합면 마모의 등급을 조사하여, 평균 치아 마모도와 부위에 따른 치아 마모도를 비교 조사하고 저작측과 비저작측 마모를 비교 조사하였으며 수평 마모면과 수직 마모면을 비교 조사하였다. 1. 평균 치아 마모도는 ordinal scale로 측정하였을 때, 절단형과 연마형간에 유의할 만한 차이가 없었다.(p >0.05) 2. 부위에 따른 치아의 마모도는 ordinal scale로 측정하였을 때, 절단형과 연마형간에 유의할 만한 차이가 없었다.(p >0.05) 3. 평균 치아 마모도는 arbitrary scale로 측정하였을 때, 절단형에 비교하여 연마형에서 높은 마모도를 보였다.(p<0.05). 4. 절단형에 비교하여 연마형은 arbitrary scale로 측정하였을 때, 구치부에서는 높은 마모도를 보였으며 전치부에서는 유의할 만한 차이가 없었다(p<0.05) 5. 구치 평균 치아 마모도와 부위에 따른 치아의 마모도는 균형측에서 절단형과 연마형간에 유의할 만한 차이를 보이지 않았다(p>0.05). 6. 전치 평균 치아 마모도와 부위에 따른 치아의 마모도는 수평 마모면과 수직 마모면 비교시, 절단형과 연마형간에 유의할 만한 차이를 보이지 않았다.(p>0.05)

철겹핍성 빈혈 환자 2례에 대한 임상적 고찰

김성균,심윤섭,한종현,이정희,김은곤,Kim, Sung-Kyun,Shim, Yun-Sueb,Han, Jong-Hyun,Lee, Jung-Hee,Kim, Eun-Gon 대한한방내과학회 2004 大韓韓方內科學會誌 Vol.25 No.4

Iron Deficiency Anemia is defined as deficiency Fe in blood. The causal relationships between this and gastrointestinal bleeding, impaired absorption, excessive menstrual flow and other maladies are not well understood. In oriental medicine Iron Deficiency Anemia is generally characterized as deficiency of ki(氣)and blood(血) defined in terms of hypofunction of the spleen and stomach, and insufficiency of the spleen and kindneys. Two Iron Deficiency Anemia patients were treated with Ickibohyoul-tang, Samchulgunbi-tang, Ickibohyoul-tang ga antler, and Sachulgunbi-tang ga antler. Symptoms improved and Blood exams (RBC, Hb, Hct) yielded higher counts. Further research concerning this is necessary.

$0.13{\mu}m$ RF CMOS 공정용 스케일러블 인덕터 모델링

김성균,안성준,김병성,Kim, Seong-Kyun,Ahn, Sung-Joon,Kim, Byung-Sung 대한전자공학회 2009 電子工學會論文誌-TC (Telecommunications) Vol.46 No.1

본 논문에서는 RF 집적회로 설계를 위한 $0.13{\mu}m$ RF CMOS용 인덕터 라이브러리를 개발하였다. 스케일러블 모델링을 위해 선폭, 회전수, 내경을 조절하여 다수의 인덕터 패턴을 제작하고, 정확한 패드 효과 보상을 위해 급전 구조를 최적화하였다. 제작된 패턴의 S-파라미터 측정 데이터를 이용하여 각 소자별로 이중-$\pi$ 등가회로 소자값을 추출한 뒤 이 값들을 인덕터의 물리적 설계 변수의 함수로 표현하는 스케일러블 모델링을 수행하였다. 개발된 라이브러리는 표준(standard) 구조와 대칭(symmetric) 구조를 가지는 두 종류의 스케일러블 인덕터 모델을 제공하며, 모델 유효 주파수는 30GHz 또는 자기공진주파수까지이다. 표준구조 인덕터의 경우 $0.12{\sim}10.7nH$의 인덕턴스를, 대칭구조 인덕터의 경우는 $0.08{\sim}13.6nH$의 인덕턴스를 갖는다. 본 연구를 통해 최종적으로 10%이하의 오차를 가지는 RF CMOS용 인덕터 라이브러리를 완성하였다. This paper presents scalable modeling of spiral inductors for RFIC design based on $0.13{\mu}m$ RF CMOS process. For scalable modeling, several inductor patterns are designed and fabricated with variations of width, number of turns and inner radius. Feeding structures are optimized for accurate de-embedding of pad effects. After measuring the S parameters of the fabricated patterns, double-$\pi$ equivalent circuit parameters are extracted for each device and their geometrical dependences are modeled as scalable functions. The inductor library provides two types of models including standard and symmetric inductors. Standard and symmetric inductors have the range of $0.12{\sim}10.7nH$ and $0.08{\sim}13.6nH$ respectively. The models are valid up to 30GHz or self-resonance frequency. Through this research, a scalable inductor library with an error rate below 10% is developed for $0.13{\mu}m$ RF CMOS process.

한반도내(韓半島內) 주요(主要) 인공구조물(人工構造物)의 적정(適正) 내진설계진도(耐震設計震度)

김성균,Kim, Sung Kyun 대한자원환경지질학회 1986 자원환경지질 Vol.19 No.4

Earthquake disaster is dependent upon both site intensity and strength of structures. The higher the strength, structures become more safe, which in turn increases the construction cost. Therefore, it is necessary to decide an optimum design intensity in which the safety is balanced with the cost. Such an optimum design intensity for major man-made structures in Korea is determined in the present study from a simulation model as follows. 1) Hypothetical earthquake time series are generated from the probability distribution to represent appropriately the seismicity of Korea. 2) The strength of structures constructed with a certain design intensity is assumed to exponentially decrease with the elapsed time. The construction cost is also expressed as a function of design intensity. 3) Comparing the seismic intensity generated from the earthquake time series with the strength of structures, the safety of structures is examined. Then the time until the structure is damaged by an earthquake is obtained within the designed life time. 4) The above simulation is iterated several hundred times and hence the mean life time of structures having a certain design intensity is obtained. 5) After all, the optimum design intensity to minimize the annual mean loss, the ratio of construction cost to mean life time, is estimated. The major conclusions obtained from the above simulation model are as follows. 1) Depending upon the designed life time ($T_p$), the optimum design intensities are appeared to be 0. 05-0. 10g for $T_p=50yr$ and 0. 08-0.13g for $T_p=100yr$. 2) According to the sensitivity analysis, the optimum design intensity increases with the rapid strength decrease of structure and decreases with the increase of initial construction cost.

Development of Evaluation Modules for Evaluating Decommissioning Scenarious Using Digital Mock-Up System

김성균,박희성,이근우,정종헌,Kim Sung-Kyun,Park Hee-Sung,Lee Kune-Woo,Jung Chong-Hun Korean Radioactive Waste Society 2006 방사성폐기물학회지 Vol.4 No.3

In the decommissioning and decontamination(D&D) planning stage, it is important that the scenarios are evaluated from an engineering point of views because the decommissioning work has to be executed economically and safely by following the best scenarios. Therefore, we need to develope several modules to evaluate the decommissioning scenarios. In this paper, the digital mock-up system is constructed in the virtual space to simulate the whole decommissioning process. The schedule evaluating equation and cost evaluation equation are derived to calculate the working time and the expected cost. And in order to easily identify the radiation level about the activated objects, the radiation visualization module is developed. Finally, on the basis of the obtained results from the Digital Mock-up and other important factors, the evaluating method of the scenarios that can indicate the best scenario is described.

뇌졸중을 동반한 천식 환자 자하거 약침 투여 2례

김성균,한종현,심윤섭,이정희,김은곤,Kim, Sung-Kyun,Han, Jong-Hyun,Shim, Yun-Seub,Lee, Jung-Hee,Kim, Eun-Gon 대한약침학회 2004 Journal of pharmacopuncture Vol.7 No.3

Nowadays Asthma is considered to be an inflamatory disease characterized by airway hyperresponsiveness and pulmonary eosinophilia. Hominis Placenta is the dried placenta of a healthy women. It has correspondence to the meridians of lung and kindey. Hominis Placenta acupuncture therapy has effect on invigoration of vital energy nourishing blood and tonifying the essence. It can be applied to the disease as Asthma, pulmonary tuberculosis, chronic hepatitis, liver cirrhosis, degenerative change and cerebrovascular disease. We treated two patients of Asthma with CVA by Homins Placenta Aqua-Acupuncture. The effect of Homins Placenta Aqua-Acupuncture was assessed by analyzing the pulmonary function test(PFT) and Quality of Life Questionnaire for adult Korean Asthmatics(QLQAKA) in patients before and after treatment. Total score was increased. The patients are satisfied our treatment. But further research concerning this is still necessary.

코 내부 유로(비강) 내부 유동의 PIV해석

김성균,Kim, Sung-Kyun 대한기계학회 2002 大韓機械學會論文集B Vol.26 No.6

For the first time, airflow in the nasal cavity of a normal Korean adult is investigated experimentally by PIV measurement. Nasal airflow can be subdivided into two interrelated categories; nasal airflow resistance and heat and mass transfer between the air stream and the walls of the nasal cavity. In this study, thanks to a new method for the model casting by a combination of the rapid prototyping and curing of clear silicone. a transparent rectangular box containing the complex nasal cavity can be made fur PIV experiments. The CBC PIV algorithm is used for analysis. Average and RMS distributions are obtained for inspirational and expiration nasal airflows. Data fer the airflow at the end of meatuses are obtained for the first time. Comparisons between western and Korean nasal airflows are appreciated. Due to the difference in geometry of the frontal part of nasal cavity, the flow near nares shows the difference.

갑상선기능항진증 환자 1례에 관한 증례보고

김성균,이한배,이승희,진속창,민건우,정지천,박종혁,Kim, Sung-Kyun,Lee, Han-Bae,Lee, Seung-Hee,Jin, Sok-Chang,Min, Gun-Woo,Jeong, Ji-Cheon,Park, Jong-Hyuck 대한한방내과학회 2002 大韓韓方內科學會誌 Vol.23 No.2

Objective : This study was to investigate diagnosis and treatment based on an overall analysis of signs and symptoms on a hyperthyroid patient. Methods : The observation of the clinical progress was carried out by conducting diagnosis and treatment based on an overall analysis of signs and symptoms with the patient diagnosed hyperthyroidism. Results : Treatments such as the invigoration of qi (益氣) nourishing m (養陰) was given because the patient showed the qi deficiency (氣虛) and m deficiency (陰虛). Conclusion : Diagnosis and treatment based on an overall analysis of signs and symptoms of a hyperthyroid patient had moderate effects on the improvement of the patients condition.

벼의 ${\alpha}-Glucosidase$에 의한 Ascorbic acid로부터 Ascorbic acid-2-Glucoside의 생산

김성균,황기철,방원기,Kim, Sung-Kyoon,Hwang, Ki-Chul,Bang, Won-Gi 한국응용생명화학회 2000 Applied Biological Chemistry (Appl Biol Chem) Vol.43 No.1

Ascorbic acid로부터 $2-O-{\alpha}-D-glucopyranosyl-L-ascorbic$ acid (AA-2G)를 생산하기 위하여, transglucosylation 활성을 가지는 발아미의 ${\alpha}-glucosidase$를 효소원으로 이용하였다. 시험한 6 품종의 벼중에서 일품벼의 ${\alpha}-glucosidase$ 활성이 125.0 unit/ml로 가장 높았으며, 발아후 3일째에서 최대 비활성 8.52 unit/ml protein을 보였다. 일품벼의 조효소액을 이용한 AA-2G 생산에 있어서 glucose 공여체로는 maltose가 가장 좋았으며, maltose와 ascorbic acid의 최적 농도는 각각 125 mM와 175 mM이었다 ${\alpha}-Glucosidase$ 농도는 100 unit에서 가장 좋았으며, 효과적인 완충용액은 sodium citrate였고, 최적 농도는 100 mM이었다 최적 pH 및 반응은도는 각각 5.0과 $60^{\circ}C$이었다. 상기의 최적 반응조건 하에서 35분 반응후에 ascorbic acid로부터 $108.43\;{\mu}M/unit$의 AA-2G가 생산되었으며, 전환율은 ascorbic acid에 대해 6.2%였다. For the enzymatic production of $2-O-{\alpha}-D-glucopyranosyl-L-ascorbic$ acid (AA-2G) from ascorbic acid, rice seed was used as the source of ${\alpha}-glucosidase$ having transglucosylation activity. Among six rice varieties, cultivated in Korea, ${\alpha}-glucosidase$ activity of Oryza savita L. cv. Ilpumbyeo was the highest with 125.03 unit/ml and it had maximum specific activity with 8.52 unit/mg protein when rice seeds were grown for 3 days after germination. For the production of AA-2G using crude extract of O. savita L. cv. Ilpumbyeo, maltose was most effective glucose donor. The optimum concentration of maltose and ascorbic acid were 125 mM and 175 mM, respectively. The optimum concentration of ${\alpha}-glucosidase$ was 100 unit. The most effective buffer was 100 mM sodium citrate. The optimum pH and temperature were 5.0 and $60^{\circ}C$, respectively. Under the optimum condition, $108.43\;{\mu}M/unit$ of AA-2G was produced from ascorbic acid after 35 minutes of reaction, which corresponds to 6.2% of conversion ratio based on the amount of ascorbic acid used.

영상코드화 기법을 이용한 PIV 알고리듬에 대한 연구

김성균,Kim, Sung-Kyun 대한기계학회 2000 大韓機械學會論文集B Vol.24 No.2

A Particle Image Velocimetry(PIV) algorithm is developed to analyze whole flow field both qualitatively and quantitatively. The practical use of PIV requires the use of fast, reliable, computer-based methods for tracking numerous particles suspended in a flow field. The TSS, NTSS, FFT-Hybrid, which are developed in the area of image compression and coding, are introduced to develop fast vector search algorithm. The numerical solution of the lid-driven cavity flow by the ADI algorithm with the Wachspress Formula is introduced to produce synthetic data for the validation of the tracking algorithms. The algorithms are applied to image data of real flow experiments. The comparisons in CPU time and mean error show, with a small loss of accuracy, CPU time for tracking is reduced considerably.