http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
A Study on the Fabrication of the Convex Structured MOSFET and Its Electrical Characteristics
김기홍,김현철,김흥식,안철,Kim, Gi-Hong,Kim, Hyun-Chul,Kim, Heung-Sik,An, Chul The Institute of Electronics and Information Engin 1992 전자공학회논문지-A Vol.29 No.8
To improve the characteristics of sub$\mu$m short channel MOSFET device, a new device having the convex structure is proposed. This device has 3-dimensionally expandable channel length according to the vertical etched silicon height. For the purpose of comparing the DC and AC characteristics, planar device is also fabricated. Comparing the channel length, the convex device with 0.4$\mu$m silicon height is larger about 0.56$\mu$m in NMOS and 0.78$\mu$m in PMOS than planar devices. DC characteristics, such as threshold voltage, operational current, substrate current and breakdown voltage are compared together with AC characteristics using the ring oscillator inverter delay. Also process and device simulation are performed and the differences between convex and pranaldevice are also compared.
김기홍,김홍기,정혁,김종성,손욱호,Kim, Gi-Hong,Kim, Hong-Gi,Jeong, Hyeok,Kim, Jong-Seong,Son, Uk-Ho 한국전자통신연구원 2007 전자통신동향분석 Vol.22 No.4
혼합현실 기술을 휴대가 용이한 모바일 기기상에서 효과적으로 구현하기 위해서는 기기에 부착된 카메라의 위치를 인식하는 기술을 시작으로 입력된 실세계 공간에 가상의 디지털 정보를 정합하고 표현하는 기술, 사용자가 표현된 혼합현실 환경과 현실감있게 상호작용하는 기술, 그리고 다양한 응용분야에 맞게 혼합현실 콘텐츠를 저작하는 기술에 이르기까지 여러 가지 세부 기술들이 요구된다. 본 논문에서는 언급한 세부 기술들에 대한 개요와 국내외적으로 진행되고 있는 관련 기술들의 동향을 구체적인 사례를 통해 소개한다.
탄성고무인상재에 따른 초경석고 모형의 정밀도에 관한 연구
김기홍,장익태,임순호,Kim, Kee-Hong,Chang, Ik-Tae,Yim, Soon-Ho 대한치과보철학회 1999 대한치과보철학회지 Vol.37 No.3
The purpose of this study was to compare the accuracy of currently used elastomeric impression materials for complete arch impression taking. Five elastomers (Impregum, Permlastic, Express, Extrude, Examix) and one Irreversible hydrocolloid (Aroma-fine) were tested. For each material, 5 impressions were made of stainless steel model to which five tapered posts were attached. Custom trays were used for polyether and polysulfide impression materials, and putty/wash two step technique was used for addition polyvinylsiloxane impression materials. Improved stone mod els were poured to all impressions. Accuracy of the materials was assessed by measuring ten distances on stone dies poured from impressions of the master model. All measurements for master and improved stone models were made with three dimensional measuring machine. The results were as follows 1. The dimensional accuracy of polyether, extrude, and examix were significantly superior to poly-sulfide, exress, and alginate in reproducing full arch mode (p<0.05) 2. There were no statistical differences in dimensional accuracy for full arch impression between polyether extrude and examix (p>0.05). 3. there were no statistical differences in dimensional accuracy between polysulfide, express, and alginate(p>0.05). 4. There were no statistical differences between addition polyvinyl siloxane materials (p>0.05) 5. There were no statistical differences between anterior-posterior and lateral dimensional changes of all impression materials (p>0.05).
근골격계 질환 예방에 관한 연구: 화물운전자를 중심으로
김기홍,정병현,Kim, Ki Hong,Chung, Byung Hyun 대한안전경영과학회 2021 대한안전경영과학회지 Vol.23 No.2
The possibility of developing musculoskeletal disorders increases with the length of service of the worker. Musculoskeletal disorders can occur when performing repetitive and forceful movements. Therefore, Cargo drivers operate repeatedly in the wrong posture for a long time. When loading and unloading a cargo, the cargo driver works repeatedly with force. Cargo operators are also exposed to musculoskeletal disorders in the working environment due to poor posture and repetitive movements. In this study, we are going to conduct a study on the level of awareness and prevention of the possibility of musculoskeletal disorders in cargo drivers for long periods of time. As a result of the study, the factors that cause musculoskeletal disorders in each group can occur during the long-term operation and preparation of drivers.
한국산(韓國産) 야조(野鳥)에 기생(寄生)하는 선충류(線蟲類)에 관한 연구(硏究)(제1보(第一報))
김기홍,임한종,Kim, Ki-Hong,Rim, Han-Jong 한국농촌의학.지역보건학회 1990 농촌의학·지역보건 Vol.15 No.1
한국산 야조에 기생하는 윤충류에 관한 연구는 주들(1973)에 의해 흡충류 일부만이 기록되어 있을 뿐 그 외에는 거의 분류학적인 연구가 되어 있지 않은 실정이다. 따라서 저자 등은 1990년 1월부터 1990년 3월에 걸쳐 경기도, 강원도 및 경북등지에서 채집한 야조 5종으로부터 기생윤충류를 조사하였으며, 수집된 윤충류중 일단 선충류 3종을 분류, 기재하였다. 채집된 야조의 종류는 Garrulus glandarius brandtii, Cyanopica cyanus koreensis, Otus scops stictonotus, Asia flammeus flammeus, Buteo buteo japonicus 등이다. 동정된 선충류의 종류는 Acuariidae과의 Dispharynx nasuta(male & female), Spiruridae과의 Excisa excisa(male & female), Fillariidae과의 Diplotriaena manipoli(male & female) 등 3종이며, 이들 3종은 모두 우리 나라에서의 처음 기록되는 종들이다. From five species of wild birds which were collected in the period of January, 1990~March, 1990, three species of nematodes were identified. The three species were Dispharynx nasuta(Rudolphi, 1819) in Spiruridae and Diplotriaena manipoli Chu, 1931 in Fillaridae. They are the first recording species in Korea and the morphological characters of each species(male & female) are described.
수량화 2종법을 이용한 GIS 기반의 인제지역 산사태 영향인자 분석
김기홍,이환길,Kim, Gi-Hong,Lee, Hwan-Gil 대한공간정보학회 2012 한국공간정보학회지 Vol.20 No.3
강원도의 경우 대부분 산지로 이루어져 있어 산사태로 인한 피해가 매우 크다. 이러한 산사태를 예방하기 위해서는 산사태 발생에 영향을 미치는 기초적인 관련 인자를 분석하는 것이 중요하다. 본 연구에서는 강원도 인제군 인제읍 덕산리 지역을 대상으로 재해 직후 촬영된 항공사진을 이용하여 육안판독에 의한 디지타이징 방법으로 산사태 발생 및 미발생 지점을 추출하였으며, GIS를 이용한 지형도, 임상도, 토양도의 중첩분석을 통하여 산사태 관련 인자에 대하여 지형학적, 임상학적, 토양학적 특성을 수량화 2종법을 이용하여 분석하였다. 분석결과 경사도는 $20^{\circ}{\sim}35^{\circ}$ 사이에서 산사태가 많이 발생하였으며, 임상 인자의 경우 침엽수가 산사태 발생 빈도와 더 큰 연관성을 보였다. 토양 인자의 경우 유효 토심이 얕을수록, 토양모재가 산성암일수록 산사태 발생빈도가 높게 나타났다. Gangwon-do has been suffering extensive landslide dam age, because its geography consists mainly of mountains. Analyzing the related factors is crucial for landslide prediction. We digitized the landslide and non-landslide spots on an aerial photo obtained right after a disaster in Inje, Gangwon-do. Three landslide factors-topographic, forest type, and soil factors-w ere statistically analyzed through GIS overlap analysis between topographic map, forest type map, and soil map. The analysis showed that landslides occurred mainly between the inclination of $20^{\circ}$ and $35^{\circ}$, and needleleaf tree area is more vulnerable to a landslide. About soil properties, an area with shallow effective soil depth and parent material of acidic rock has a greater chance of landslide.