http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
토픽 모델링을 활용한 코로나19 초기 생활체육 이슈 분석
정연길,서수민,강현민 한국지능정보시스템학회 2022 지능정보연구 Vol.28 No.3
지난 2019년 12월 시작된 코로나19는 정치, 경제, 사회, 문화 등 우리 삶의 전반에 많은 영향을 끼쳐 왔으며, 스포츠, 공연 예술 등의 분야 역시 이로 인해 큰 폭으로 활동이 위축되었다. 스포츠 분야의 경우 참여스포츠를 대표하는 생활체육 분야에서의 변화가 특히 크게 나타났으며, 헬스장, 탁구장, 배드민턴 동호회 등 국민 삶과 밀접한 장소에서의 확진자 발생은 코로나19의 확산에 대한 사회적 공포감을 증폭시키는 원인이 되기도 하였다. 이에 본 연구에서는 코로나19가 최초 확산한 시기의 생활체육 관련 국내 언론 기사를 분석하여, 코로나19 사태로 인해 생활체육 분야에서 어떤 이슈들이 현장에서 등장하고 있으며 어떠한 논의들이 이루어지고 있는지 살펴본다. 구체적으로 본 연구는 국내 대표적인 포털 뉴스 사이 트로부터 생활체육과 관련된 코로나19 이슈를 다루고 있는 뉴스 기사를 수집한 후, 이에 대한 토픽 모델링(Topic Modeling) 분석을 통해 코로나19 환경에서의 주요 생활체육 이슈를 파악하였다. 분석을 통해 체육시설 코로나 발생, 체육 활동 지원, 생활체육활동 변화 등의 의미있는 이슈를 발견하였으며, 이들 주요 이슈에 대한 워드 클라우드(Wordcloud) 분석을 통해 이슈를 시각적으로 이해하고 시간의 흐름에 따라 이러한 이슈가 변화하는 양상을 확인하였다.
수용성 매체에서 뮬라이트의 합성거동 및 입자형상에 미치는 염 및 전구체 pH의 영향
정연길,이재언,신영일,김재원,조창용,Jung, Yeon-Gil,Lee, Jae-Ean,Shin, Young-Ill,Kim, Jae-Won,Jo, Chang-Yong 한국재료학회 2003 한국재료학회지 Vol.13 No.4
The effects of the salt and the precursor pH on the synthesizing behavior and the morphology of mullite have been studied. Two kinds of mullite precursor sols were prepared by the dissolution of two kinds of salt (aluminum nitrate enneahydrate, Al($NO_3$)$_3$ㆍ$9H_2$O; type I and aluminum sulfate 14∼18 water, (SO$Al_4$)$_3$$\cdot$$14∼18H_2$O; type II) into the mixture of colloidal silica sol, respectively. Precursor pH of the sols was controlled to the acidic (pH= 1.5∼2) and basic (pH= 8.5∼9) conditions. The co-products with nitrate and sulfate were completely eliminated at $500^{\circ}C$ and $850^{\circ}C$, respectively, which was confirmed by TG/DTA results. The synthesizing temperature of mullite phase was found to be above $1200^{\circ}C$ for pH= 1.5∼2 and above $1300^{\circ}C$ for pH= 8.5∼9 in type I. However, in type II, the synthesizing temperature of mullite was decreased to $850^{\circ}C$ for pH= 1.5∼2 and $1100^{\circ}C$ for pH= 8.5∼9. The grain size of the mullite synthesized at pH= 8.5∼9 was larger than that at pH= 1.5∼2 in overall heat-treated temperatures, showing smaller grain size in type II. Aspect ratio of the mullite grains was more increased at pH= 1.5∼2 than pH= 8.5∼9 in type I, showing similar aspect ratio at both pH conditions in type II. It was found that the synthesizing temperature and grain size were predominantly governed by the initial precursor pH and decomposition of the salt, with minor effect on the grain morphology.
InAs 양자점의 광학적 성질에 미치는 초격자층의 영향
정연길,최현광,박유미,황숙현,윤진주,이제원,임재영,전민현,Jeong Yonkil,Choi Hyonkwang,Park Yumi,Hwang Sukhyon,Yoon Jin-Joo,Lee Jewon,Leem Jae-Young,Jeon Minhyon 한국재료학회 2004 한국재료학회지 Vol.14 No.2
We investigated the effects of high potential barriers on the optical characteristics of InAs quantum dots (QDs) by using photoluminescence (PL) and photoreflectance (PR) spectroscopy. A sample with regular InAs quantum dots on GaAs was grown by molecular beam epitaxy (MBE) as a reference. Another InAs QDs sample was embedded in single AlGaAs barriers. On the other hand, a sample with GaAs/AlGaAs superlattice barriers was adopted for comparison with a sample with a single AlGaAs layer. In results, we found that the emission wavelength of QDs was effectively tailored by using high potential barriers. Also, it was found that the optical properties of a sample with QDs embedded in GaAs/AlGaAs superlattices were better than those of a sample with QDs embedded in a single layer of AlGaAs barriers. We believe that GaAs/AlGaAs superlattice could effectively prevent the generation of defects.
정연길,이수영,최성철 한국결정성장학회 1999 한국결정성장학회지 Vol.9 No.5
치아용 대체재료로 사용되고 있는 세 가지의 세라믹스, 장석질 자기, 운모를 함유한 유리-세라믹 및 유리침윤 알루미나에 대한 접촉피로을 실제 치아의 접촉상황과 유사한 구형입자를 이용한 헤르지안 압입시험법으로 물에서 수행하였으며, 각 재료에서의 접촉손상이 강도에 미치는 영향을 고찰하였다. 초기의 손상형태는 각 재료가 갖는 미세구조에 의존하여 나타났으며, 장석질 자기는 취성거동을 나타내는 cone 형태의 균열이, 운모를 함유한 유리-세라믹은 준-소성 변형 거동을 나타내는 변형이, 그리고 유리침윤 알루미나는 두 재료의 중간거동을 나타내었다. 그러나 반복하중의 수(n=1~n=$10^6$)가 증가됨에 따라 모든 재료에서 급격한 강도저하를 나타내었으며, 파괴는 접촉피로에 의해 형성된 손상에서 일어났다. 일정하중(200N, 500N 및 1000N)에서 반복하중의 수가 증가됨에 따라 두 번의 강도저하가 일어났으며, 첫 번째의 강도저하는 cone 형태의 균열이 주 요인으로 작용되었으며, 두 번째 강도저하는 반복하중에 따른 radial 형태의 균열에 의해 일어났다. 이러한 radial 형태의 균열발생은 각 재료에서 급격한 강도저하를 가져왔으며, 계속적인 반복하중으로 재료의 파괴를 유발시켰다. 반복하중의 수를 고정시킨 수 압입하중의 변화에 따른 강도저하에 대한 고찰을 통해 장석질 자기가 접촉피로에 대한 손상내구성을 갖음을 알 수 있었다. Hertzian indentation tests with spherical indenters in water were conducted to examine the contact fatigue in three dental ceramics, such as feldspathic porcelain, micaceous glass-ceramic (MGC) and glass-infiltrated alumina, which was used as dental restorations, and evaluated the effect of contact damage on strength. Initial damage was dependent of microstructure, showing cone cracks of brittle behavior in the feldspathic porcelain and deformation of quasi-plastic behavior in the MGC, with an intermediate case in the glass-infiltrated alumina. However, as increasing the number of cyclic loading (n=1~n =$10^6$)all materials showed an abrupt strength degradation, at which fracture was originated from damage in the contact fatigue. There were two strength degradation with increasing the number of cyclic loading in specific loads (200N, 500N, 1000N):first was from the cone cracks, and second was from the radial cracks created by cyclic loading. The radial cracks, once formed, led to rapid degradation in strength properties, Finally the material was failed at the high number of cyclic loading. Strength degradation with indentation load at fixed number of cyclic loading indicated that the feldspathic porcelain should be highly damage tolerant to the contact fatigue.