Study on mechanical behaviors of loose mortise-tenon joint with neighbouring gap

Jun-xiao He,Juan Wang,Qing-shan Yang,Miao Han,Yang Deng 국제구조공학회 2021 Structural Engineering and Mechanics, An Int'l Jou Vol.77 No.4

The neighbouring gaps at the mortise-tenon joint in traditional timber structure, which leads to the complexity of the joint, are considered to impair the mechanical performance of the joint. In this paper, numerical simulation of loose joint was conducted to examine the deformation states, stress distributions, and bearing capacities, which was verified by full-scale test. On the basis of the experimental and numerical results, a simplified mechanics model with gaps has been proposed to present the bending capacity of the loose joint. Besides, the gap effects and parameter studies on the influences of tenon height, friction coefficient, elastic modulus and axial load were also investigated. As a result, the estimated relationship between moment and rotation angle of loose joint showed the agreement with the numerical results, demonstrating validity of the proposed model; The bending bearing capacity and rotational stiffness of loose joint had a certain drop with the increasing of gaps; and the tenon height may be the most important factor affecting the mechanical behaviors of the joint when it is subjected to repeated load; Research results can provide important references on the condition assessments of the existing mortise-tenon joint.

Stereo-digital image correlation in the behavior investigation of CFRP-steel composite members

Xiao-Yuan He,Yun-Tong Dai,Hai-Tao Wang,Tian-Yuan Ge,Gang Wu,Jian-Xiao Wan,Shuang-Yin Cao,Fu-Jun Yang 국제구조공학회 2017 Steel and Composite Structures, An International J Vol.23 No.6

The application of carbon fiber reinforced polymer (CFRP) in steel structures primarily includes two categories, i.e., the bond-critical application and the contact-critical application. Debonding failure and buckling failure are the main failure modes for these two applications. Conventional electrometric techniques may not provide precise results because of the limitations associated with single-point contact measurements. A nondestructive full-field measurement technique is a valuable alternative to conventional methods. In this study, the digital image correlation (DIC) technique was adopted to investigate the bond behavior and buckling behavior of CFRP-steel composite members. The CFRP-to-steel bonded joint and the CFRPstrengthened square hollow section (SHS) steel column were tested to verify the suitability of the DIC technique. The stereo- DIC technique was utilized to measure continuous deformation. The bond-slip relationship of the CFRP-to-steel interface was derived using the DIC data. Additionally, a multi-camera DIC system consisting of four stereo-DIC subsystems was proposed and applied to the compressive test of CFRP-strengthened SHS steel column. The precise buckling location and CFRP delamination of the CFRP-strengthened SHS steel column were identified. The experimental results confirm that the stereo-DIC technique can provide effective measurements for investigating the behaviors of CFRP-steel composite members.

review on the research of mechanical problems with different moduli in tension and compression

Jun-yi Sun,Hai-qiao Zhu,Shi-hong Qin,Da-lin Yang,Xiao-ting He 대한기계학회 2010 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.24 No.9

Most materials exhibit different tensile and compressive strains given the same stress applied in tension or compression. These materials are known as bimodular materials. An important model of bimodular materials is the criterion of positive-negative signs of principal stress proposed by Ambartsumyan. This model is mainly applicable to isotropic materials and deals with the principal stress state in a point. However, due to the inherent complexity of the constitutive relation, FEM based on iterative strategy and analytical methods based on a simplified mechanical model are required. In this paper, we review the basic assumptions of this model and its development, several innovative computational methods, and some important engineering applications. We also discuss the sequent key problems in this field.

An analytical solution of bending thin plates with different moduli in tension and compression

Xiao-ting He,Xing-jian Hu,Jun-yi Sun,Zhou-lian Zheng 국제구조공학회 2010 Structural Engineering and Mechanics, An Int'l Jou Vol.36 No.3

Materials which exhibit different elastic moduli in tension and compression are known as bimodular materials. The bimodular materials model, which is founded on the criterion of positivenegative signs of principal stress, is important for the structural analysis and design. However, due to the inherent complexity of the constitutive relation, it is difficult to obtain an analytical solution of a bimodular bending components except in particular simple problems. Based on the existent simplified model, this paper solves analytically bending thin plates with different moduli in tension and compression. By using the continuity conditions of stress components in unknown neutral layer, we determine the location of the neutral layer, and derive the governing differential equation for deflection, the flexural rigidity, and the internal forces in the thin plate. We also use a circular thin plate with bimodulus to illustrate the application of this solution derived in this paper. The results show that the introduction of different moduli has influences on the flexural stiffness of the bending thin plate.

Multi-dimensional seismic response control of offshore platform structures with viscoelastic dampers (II-Experimental study)

He, Xiao-Yu,Zhao, Tie-Wei,Li, Hong-Nan,Zhang, Jun Techno-Press 2016 Structural monitoring and maintenance Vol.3 No.2

Based on the change of traditional viscoelastic damper structure, a brand-new damper is designed to control simultaneously the translational vibration and the rotational vibration for platforms. Experimental study has been carried out on the mechanical properties of viscoelastic material and on its multi-dimensional seismic response control effect of viscoelastic damper. Three types of viscoelastic dampers with different shapes of viscoelastic material are designed to test the influence of excited frequency, strain amplitude and ambient temperature on the mechanical property parameters such as circular dissipation per unit, equivalent stiffness, loss factor and storage shear modulus. Then, shaking table tests are done on a group of single-storey platform systems containing one symmetric platform and three asymmetric platforms with different eccentric forms. Experimental results show that the simulation precision of the restoring force model is rather good for the shear deformation of viscoelastic damper and is also satisfied for the torsion deformation and combined deformations of viscoelastic damper. The shaking table tests have verified that the new-type viscoelastic damper is capable of mitigating the multi-dimensional seismic response of offshore platform.

Neuron Discharge and c-Fos Expression in the Nucleus of the Solitary Tract Following Electroacupuncture at Acupoints of the Yangming Stomach Meridian of Foot

Jun-Feng He,Jie Yan,Jiang-Shan Li,Jian-Hua Liu,Chao Wang,Xiao-Rong Chang,Ya-Ting Qu 사단법인약침학회 2013 Journal of Acupuncture & Meridian Studies Vol.6 No.2

The nucleus of the solitary tract (nucleus tractus solitarii; NTS) is a primary center for both visceral afferents and somatic afferents. Previous experiments have demonstrated that the NTS is closely connected to the stomach and acupoints in the Yangming Stomach Meridian of Foot (ST Meridian). In this study, extracellular recording and immunochemistry methods were used to analyze the discharge of neurons and c-Fos protein expression in the NTS following acupuncture at different acupoints and a nonacupoint. A total of 104 discharging neurons were detected in the NTS of 52 rats, of which 86 provided complete data. After acupuncture at Sibai (ST 2), Zusanli (ST 36), Neiting (ST 44), Quanliao (SI 18), and the nonacupoint, the neuron response rate in the NTS was 65.12%, 51.16%, 46.51%, 34.88% and 31.40% respectively. For neuron response rate, there was a significant difference among Sibai (ST 2), Zusanli (ST 36), Neiting (ST 44), Quanliao (SI 18), and the nonacupoint (p < 0.01 or p < 0.05). In the other 48 rats, the number of c-Fos immunoreactive neurons in the NTS by electroacupuncture (EA) at Sibai (ST 2) group was significantly higher than that EA at other acupoints and the nonacupoint (p < 0.05 or p < 0.01). EA at both Zusanli (ST 36) and Neiting (ST 44) increased c-Fos immunoreactive neurons significantly over EA at Quanliao (SI 18) and the nonacupoint (p < 0.05 or p < 0.01), while there was no difference between EA at Quanliao (SI 18) and the nonacupoint group (p > 0.05). The experiments demonstrated that the afferent convergence in NTS are different by body surface points stimulus, which suggests that the NTS might be a primary center in the central nervous system receiving acupoints stimulus from the ST Meridian.

LETTER TO THE EDITOR : Preoperative Evaluation of a Subungual Glomus Tumor Case Using Multidetector Computed Tomography Angiography

( Jun Xia ),( Yan Xia Cai ),( Zhan Qiang Jin ),( Xiao Zhen He ),( Yi Ming Fan ) 대한피부과학회 2015 Annals of Dermatology Vol.27 No.2

Power series solution of circular membrane under uniformly distributed loads: investigation into Hencky transformation

Jun-yi Sun,Yang Rong,Xiao-ting He,Xiao-wei Gao,Zhou-lian Zheng 국제구조공학회 2013 Structural Engineering and Mechanics, An Int'l Jou Vol.45 No.5

In this paper, the problem of axisymmetric deformation of the circular membrane fixed at its perimeter under the action of uniformly-distributed loads was resolved by exactly using power series method, and the solution of the problem was presented. An investigation into the so-called Hencky transformation was carried out, based on the solution presented here. The results obtained here indicate that the well-known Hencky solution is, without doubt, correct, but in the published papers the statement about its derivation is incorrect, and the so-called Hencky transformation is invalid and hence may not be extended to use as a general mathematical method.

Prevalence of Spina Bifida Occulta and Its Relationship With Overactive Bladder in Middle-Aged and Elderly Chinese People

Jun Wei Wu,Yu Rong Xing,Yi Bo Wen,Tian Fang Li,Quan De Feng,Xiao Ping Shang,Yun Long Li,Jin Jin Feng,Xin Xin Wang,Rong Qun Zhai,Xiang Fei He,Tao Chen,Xin Jian Liu,Jian Guo Wen 대한배뇨장애요실금학회 2016 International Neurourology Journal Vol.20 No.2

Purpose: To investigate the prevalence of spina bifida occulta (SBO) and its relationship with the presence of overactive bladder (OAB) in middle-aged and elderly people in China. Methods: A cross-sectional community-based survey was carried out at 7 communities in Zhengzhou City, China from December 15, 2013 to June 10, 2014, where residents aged over 40 years were randomly selected to participate. All of the participants underwent lumbosacral radiographic analysis and relevant laboratory tests. A questionnaire including basic information, past medical history and present illness, and the OAB symptom score was filled out by all participants. Chi-square tests and logistic regression were used for data analysis with a P-value of <0.05 denoting statistical significance. Results: A total of 1,061 subjects were qualified for the final statistical analysis (58.8±11.7 years; male, 471 [44.4%]; female, 590 [55.6%]). The overall prevalence of SBO was 15.1% (160 of 1,061): 18.3% (86 of 471) in men and 12.5% (74 of 590) in women. Among these subjects, 13.7% (145 of 1,061) had OAB: 13.2% (62 of 471) in men and 14.1% (83 of 590) in women. The results of logistic regression showed that age, SBO, history of cerebral infarction (HCI), and constipation were risk factors for OAB (P<0.05), while sex, history of childhood enuresis (HCE), body mass index (BMI), and diabetes mellitus (DM) were not (P>0.05). In men, age, SBO, and constipation were risk factors for OAB (P<0.05), while HCE, BMI, DM, HCI, and benign prostate hyperplasia were not (P>0.05). In women, age, SBO, and HCI were risk factors for OAB (P<0.05), while HCE, BMI, DM, vaginal delivery, and constipation were not (P>0.05). Conclusions: The prevalence of SBO is high and it is related to OAB in middle-aged and elderly people in China.

An analytical solution of bending thin plates with different moduli in tension and compression

He, Xiao-Ting,Hu, Xing-Jian,Sun, Jun-Yi,Zheng, Zhou-Lian Techno-Press 2010 Structural Engineering and Mechanics, An Int'l Jou Vol.36 No.3

Materials which exhibit different elastic moduli in tension and compression are known as bimodular materials. The bimodular materials model, which is founded on the criterion of positive-negative signs of principal stress, is important for the structural analysis and design. However, due to the inherent complexity of the constitutive relation, it is difficult to obtain an analytical solution of a bimodular bending components except in particular simple problems. Based on the existent simplified model, this paper solves analytically bending thin plates with different moduli in tension and compression. By using the continuity conditions of stress components in unknown neutral layer, we determine the location of the neutral layer, and derive the governing differential equation for deflection, the flexural rigidity, and the internal forces in the thin plate. We also use a circular thin plate with bimodulus to illustrate the application of this solution derived in this paper. The results show that the introduction of different moduli has influences on the flexural stiffness of the bending thin plate.