Disruption of ecdysis in Leptinotarsa decemlineata by knockdown of chitin deacetylase 1

Jian-Jian Wu,Li-Li Mu,Zhong-Chao Chen,Kai-Yun Fu,Wen-Chao Guo,Chao Li,Guo-Qing Li 한국응용곤충학회 2019 Journal of Asia-Pacific Entomology Vol.22 No.2

Chitin deacetylases (CDAs) catalyze N-deacetylation of chitin, a crucial process for chitin modification. In the present paper, LdCDA1 was identified in Leptinotarsa decemlineata. It was copiously expressed in larval foregut, hindgut and epidermis. Just before the molt in the first, second and third larval instars, the mRNA levels of LdCDA1 were high. In the fourth (final)-instar larvae, a peak occurred 4 days after ecdysis. In vivo results revealed that LdCDA1 transcriptionally responded, positively and negatively respectively, to 20-hydroxyecdysone and juvenile hormone titers. Moreover, knockdown of LdCDA1 significantly reduced foliage consumption, lengthened developing period and prevented growth in the final instar larvae. Three distinct lethal phenotypes were noted in the LdCDA1 RNAi larvae. About 30% of the RNAi larvae became moribund and finally died; approximately 50% of deformed pupae died as pharate adults; and around 20% of LdCDA1 depleted pupae finally emerged as abnormal adults and eventually died within 1 week after emergence. Furthermore, chitin content was low and the mRNA levels of five chitin biosynthesis transcripts (LdUAP1, LdUAP2, LdChSAa, LdChSAb and LdChSB) were significantly declined in the LdCDA1 RNAi larvae. In addition, glucose, trehalose and glycogen contents were increased in the LdCDA1 depleted hypomorphs, along with highly expressed genes coding for trehalose and glycogen synthesis enzymes. The findings provide a compelling piece of evidence that CDA1 is critical for chitin deposition in L. decemlineata. Moreover, LdCDA1 may be a potential target for control of the larvae.

Effect of Cu doping on the SCR activity of CeO2 catalyst prepared by citric acid method

Rui-Tang Guo,Wen-long Zhen,Wei-Guo Pan,Yue Zhou,Jie-nan Hong,Hong-jian Xu,Qiang Jin,Cheng-gang Ding,Shi-yi Guo 한국공업화학회 2014 Journal of Industrial and Engineering Chemistry Vol.20 No.4

CeO2–CuO catalyst prepared by citric acid method was investigated for selective catalytic reduction of NO with NH3. The activity of the CeO2 catalyst was enhanced about 8–27% in the temperature range of 125–225 ℃ at a space velocity of 28,000 h 1 by the addition of Cu. It was found that the state of Cu species had great impact on the SCR performance of CeO2–CuO catalyst. Cu2+ can enhance the low temperature activity of SCR reaction, while CuO would promote NH3 oxidation before SCR reaction at high temperature, which would cause the decrease of its high temperature SCR activity.

Endovascular Treatment for Iliac Vein Compression Syndrome: a Comparison between the Presence and Absence of Secondary Thrombosis

Wen-Sheng Lou,Jian-Ping Gu,Xu He,Liang Chen,Hao-Bo Su,Guo-Ping Chen,Jing-Hua Song,Tao Wang 대한영상의학회 2009 Korean Journal of Radiology Vol.10 No.2

Objective: To evaluate the value of early identification and endovascular treatment of iliac vein compression syndrome (IVCS), with or without deep vein thrombosis (DVT). Materials and Methods: Three groups of patients, IVCS without DVT (group 1, n = 39), IVCS with fresh thrombosis (group 2, n = 52) and IVCS with non-fresh thrombosis (group 3, n = 34) were detected by Doppler ultrasonography, magnetic resonance venography, computed tomography or venography. The fresh venous thrombosis were treated by aspiration and thrombectomy, whereas the iliac vein compression per se were treated with a self-expandable stent. In cases with fresh thrombus, the inferior vena cava filter was inserted before the thrombosis suction, mechanical thrombus ablation, percutaneous transluminal angioplasty, stenting or transcatheter thrombolysis. Results: Stenting was performed in 111 patients (38 of 39 group 1 patients and 73 of 86 group 2 or 3 patients). The stenting was tried in one of group 1 and in three of group 2 or 3 patients only to fail. The initial patency rates were 95% (group 1), 89% (group 2) and 65% (group 3), respectively and were significantly different (p = 0.001). Further, the six month patency rates were 93% (group 1), 83% (group 2) and 50% (group 3), respectively, and were similarly significantly different (p = 0.001). Both the initial and six month patency rates in the IVCS patients (without thrombosis or with fresh thrombosis), were significantly greater than the patency rates of IVCS patients with non-fresh thrombosis. Conclusion: From the cases examined, the study suggests that endovascular treatment of IVCS, with or without thrombosis, is effective. Objective: To evaluate the value of early identification and endovascular treatment of iliac vein compression syndrome (IVCS), with or without deep vein thrombosis (DVT). Materials and Methods: Three groups of patients, IVCS without DVT (group 1, n = 39), IVCS with fresh thrombosis (group 2, n = 52) and IVCS with non-fresh thrombosis (group 3, n = 34) were detected by Doppler ultrasonography, magnetic resonance venography, computed tomography or venography. The fresh venous thrombosis were treated by aspiration and thrombectomy, whereas the iliac vein compression per se were treated with a self-expandable stent. In cases with fresh thrombus, the inferior vena cava filter was inserted before the thrombosis suction, mechanical thrombus ablation, percutaneous transluminal angioplasty, stenting or transcatheter thrombolysis. Results: Stenting was performed in 111 patients (38 of 39 group 1 patients and 73 of 86 group 2 or 3 patients). The stenting was tried in one of group 1 and in three of group 2 or 3 patients only to fail. The initial patency rates were 95% (group 1), 89% (group 2) and 65% (group 3), respectively and were significantly different (p = 0.001). Further, the six month patency rates were 93% (group 1), 83% (group 2) and 50% (group 3), respectively, and were similarly significantly different (p = 0.001). Both the initial and six month patency rates in the IVCS patients (without thrombosis or with fresh thrombosis), were significantly greater than the patency rates of IVCS patients with non-fresh thrombosis. Conclusion: From the cases examined, the study suggests that endovascular treatment of IVCS, with or without thrombosis, is effective.

An Empirical Analysis of Sino-Russia Foreign Trade Turnover Time Series: Based on EMD-LSTM Model

GUO, Jian,WU, Kai Kun,YE, Lyu,CHENG, Shi Chao,LIU, Wen Jing,YANG, Jing Ying Korea Distribution Science Association 2022 The Journal of Asian Finance, Economics and Busine Vol.9 No.10

The time series of foreign trade turnover is complex and variable and contains linear and nonlinear information. This paper proposes preprocessing the dataset by the EMD algorithm and combining the linear prediction advantage of the SARIMA model with the nonlinear prediction advantage of the EMD-LSTM model to construct the SARIMA-EMD-LSTM hybrid model by the weight assignment method. The forecast performance of the single models is compared with that of the hybrid models by using MAPE and RMSE metrics. Furthermore, it is confirmed that the weight assignment approach can benefit from the hybrid models. The results show that the SARIMA model can capture the fluctuation pattern of the time series, but it cannot effectively predict the sudden drop in foreign trade turnover caused by special reasons and has the lowest accuracy in long-term forecasting. The EMD-LSTM model successfully resolves the hysteresis phenomenon and has the highest forecast accuracy of all models, with a MAPE of 7.4304%. Therefore, it can be effectively used to forecast the Sino-Russia foreign trade turnover time series post-epidemic. Hybrid models cannot take advantage of SARIMA linear and LSTM nonlinear forecasting, so weight assignment is not the best method to construct hybrid models.

Use of multi-hybrid machine learning and deep artificial intelligence in the prediction of compressive strength of concrete containing admixtures

Jian, Guo,Wen, Sun,Wei, Li Techno-Press 2022 Advances in concrete construction Vol.13 No.1

Conventional concrete needs some improvement in the mechanical properties, which can be obtained by different admixtures. However, making concrete samples costume always time and money. In this paper, different types of hybrid algorithms are applied to develop predictive models for forecasting compressive strength (CS) of concretes containing metakaolin (MK) and fly ash (FA). In this regard, three different algorithms have been used, namely multilayer perceptron (MLP), radial basis function (RBF), and support vector machine (SVR), to predict CS of concretes by considering most influencers input variables. These algorithms integrated with the grey wolf optimization (GWO) algorithm to increase the model's accuracy in predicting (GWMLP, GWRBF, and GWSVR). The proposed MLP models were implemented and evaluated in three different layers, wherein each layer, GWO, fitted the best neuron number of the hidden layer. Correspondingly, the key parameters of the SVR model are identified using the GWO method. Also, the optimization algorithm determines the hidden neurons' number and the spread value to set the RBF structure. The results show that the developed models all provide accurate predictions of the CS of concrete incorporating MK and FA with R² larger than 0.9972 and 0.9976 in the learning and testing stage, respectively. Regarding GWMLP models, the GWMLP1 model outperforms other GWMLP networks. All in all, GWSVR has the worst performance with the lowest indices, while the highest score belongs to GWRBF.

Analytical solutions for geosynthetic tube resting on rigid foundation

Guo, Wei,Chu, Jian,Yan, Shuwang,Nie, Wen Techno-Press 2014 Geomechanics & engineering Vol.6 No.1

Geosynthetic tubes inflated with water, clay slurry or sand have been widely used for large dike construction in land reclamation projects. In this paper, analytical solutions for geosynthetic tube resting on rigid foundation is presented by adopting an approach similar to that presented by Leshchinsky et al. (1996). The proposed method allows a quick preliminary design to be made for using a closed-form solution. To simplify the analysis, relationships between geometrical parameters and pumping pressure are established using numerical method. The analytical solutions were compared with several existing solutions and good agreements were achieved.

Capacity design of boundary elements of beam-connected buckling restrained steel plate shear wall

Wen-Yang Liu,Guo-Qiang Li,Jian Jiang 국제구조공학회 2018 Steel and Composite Structures, An International J Vol.29 No.2

As a lateral load resisting component, buckling restrained steel plate shear walls (BRW) have excellent energy dissipating capacity. Similar to thin steel plate shear walls, the mechanical behavior of BRWs depends on the boundary elements (adjacent beams and columns) which need adequate strength and stiffness to ensure the complete yielding of BRWs and the emergence of expected plastic collapse mechanism of frame. This paper presents a theoretical approach to estimate the design forces for boundary elements of beam-connected BRW (i.e., The BRW is only connected to beams at its top and bottom, without connections to columns) using a fundamental plastic collapse mechanism of frame, a force transferring model of beamconnected BRW and linear beam and column analysis. Furthermore, the design method of boundary beams and columns is presented. The proposed approach does not involve nonlinear analyses, which can be easily and efficiently used to estimate the design forces of beams and columns in a frame with BRWs. The predicted design forces of boundary elements are compared with those from nonlinear finite element analyses, and a good agreement is achieved.

Impact performance for high frequency hydraulic rock drill drifter with sleeve valve

Guo, Yong,Yang, Shu Yi,Liu, De Shun,Zhang, Long Yan,Chen, Jian Wen Korean Society for Fluid machinery 2016 International journal of fluid machinery and syste Vol.9 No.1

A high frequency hydraulic rock drill drifter with sleeve valve is developed to use on arm of excavator. In order to ensure optimal working parameters of impact system for the new hydraulic rock drill drifter controlled by sleeve valve, the performance test system is built using the arm and the hydraulic source of excavator. The evaluation indexes are gained through measurement of working pressure, supply oil flow and stress wave. The relations of working parameters to impact system performance are analyzed. The result demonstrates that the maximum impact energy of the drill drifter is 98.34J with impact frequency of 71HZ. Optimal pressure of YZ45 rock drill is 12.8 MPa-13.6MPa, in which the energy efficiency reaches above 58.6%, and feature moment of energy distribution is more than 0.650.

High-Definition Computed Tomography for Coronary Artery Stent Imaging: a Phantom Study

Wen Jie Yang,Ke Min Chen,Li Fang Pang,Ying Guo,Jian Ying Li,Huang Zhang,Zi Lai Pan 대한영상의학회 2012 Korean Journal of Radiology Vol.13 No.1

Objective: To assess the performance of a high-definition CT (HDCT) for imaging small caliber coronary stents (≤ 3 mm) by comparing different scan modes of a conventional 64-row standard-definition CT (SDCT). Materials and Methods: A cardiac phantom with twelve stents (2.5 mm and 3.0 mm in diameter) was scanned by HDCT and SDCT. The scan modes were retrospective electrocardiography (ECG)-gated helical and prospective ECG-triggered axial with tube voltages of 120 kVp and 100 kVp, respectively. The inner stent diameters (ISD) and the in-stent attenuation value (AVin-stent) and the in-vessel extra-stent attenuation value (AVin-vessel) were measured by two observers. The artificial lumen narrowing (ALN = [ISD - ISDmeasured]/ISD) and artificial attenuation increase between in-stent and in-vessel (AAI = AVin-stent - AVin-vessel) were calculated. All data was analyzed by intraclass correlation and ANOVA-test. Results: The correlation coefficient of ISD, AVin-vessel and AVin-stent between the two observers was good. The ALNs of HDCT were statistically lower than that of SDCT (30 ± 5.7% versus 35 ± 5.4%, p < 0.05). HDCT had statistically lower AAI values than SDCT (15.7 ± 81.4 HU versus 71.4 ± 90.5 HU, p < 0.05). The prospective axial dataset demonstrated smaller ALN than the retrospective helical dataset on both HDCT and SDCT (p < 0.05). Additionally, there were no differences in ALN between the 120 kVp and 100 kVp tube voltages on HDCT (p = 0.05). Conclusion: High-definition CT helps improve measurement accuracy for imaging coronary stents compared to SDCT. HDCT with 100 kVp and the prospective ECG-triggered axial technique, with a lower radiation dose than 120 kVp application, may be advantageous in evaluating coronary stents with smaller calibers (≤ 3 mm). Objective: To assess the performance of a high-definition CT (HDCT) for imaging small caliber coronary stents (≤ 3 mm) by comparing different scan modes of a conventional 64-row standard-definition CT (SDCT). Materials and Methods: A cardiac phantom with twelve stents (2.5 mm and 3.0 mm in diameter) was scanned by HDCT and SDCT. The scan modes were retrospective electrocardiography (ECG)-gated helical and prospective ECG-triggered axial with tube voltages of 120 kVp and 100 kVp, respectively. The inner stent diameters (ISD) and the in-stent attenuation value (AVin-stent) and the in-vessel extra-stent attenuation value (AVin-vessel) were measured by two observers. The artificial lumen narrowing (ALN = [ISD - ISDmeasured]/ISD) and artificial attenuation increase between in-stent and in-vessel (AAI = AVin-stent - AVin-vessel) were calculated. All data was analyzed by intraclass correlation and ANOVA-test. Results: The correlation coefficient of ISD, AVin-vessel and AVin-stent between the two observers was good. The ALNs of HDCT were statistically lower than that of SDCT (30 ± 5.7% versus 35 ± 5.4%, p < 0.05). HDCT had statistically lower AAI values than SDCT (15.7 ± 81.4 HU versus 71.4 ± 90.5 HU, p < 0.05). The prospective axial dataset demonstrated smaller ALN than the retrospective helical dataset on both HDCT and SDCT (p < 0.05). Additionally, there were no differences in ALN between the 120 kVp and 100 kVp tube voltages on HDCT (p = 0.05). Conclusion: High-definition CT helps improve measurement accuracy for imaging coronary stents compared to SDCT. HDCT with 100 kVp and the prospective ECG-triggered axial technique, with a lower radiation dose than 120 kVp application, may be advantageous in evaluating coronary stents with smaller calibers (≤ 3 mm).

Environmental Microbiology and Engineering : Immobilization and Characterization of Tannase from a Metagenomic Library and Its Use for Removal of Tannins from Green Tea Infusion

( Jian Yao ),( Qing Long Chen ),( Guo Xiang Zhong ),( Wen Cao ),( An Yu ),( Yu Huan Liu ) 한국미생물 · 생명공학회 2014 Journal of microbiology and biotechnology Vol.24 No.1

Tannase (Tan410) from a soil metagenomic library was immobilized on different supports, including mesoporous silica SBA-15, chitosan, calcium alginate, and amberlite IRC 50. Entrapment in calcium alginate beads was comparatively found to be the best method and was further characterized. The optimum pH of the immobilized Tan410 was shifted toward neutrality compared with the free enzyme (from pH 6.4 to pH 7.0). The optimum temperature was determined to be 45°C for the immobilized enzyme and 30°C for the free enzyme, respectively. The immobilized enzyme had no loss of activity after 10 cycles, and retained more than 90% of its original activity after storage for 30 days. After immobilization, the enzyme activity was only slightly affected by Hg2+, which completely inhibited the activity of the free enzyme. The immobilized tannase was used to remove 80% of tannins from a green tea infusion on the first treatment. The beads were used for six successive runs resulting in overall hydrolysis of 56% of the tannins.