Graphical Approaches for Planning Experiments­High Resolution Linear Graphs for Three­Level Designs

Lee, Sang-­Heon Military Operations Research Society of Korea 2003 한국국방경영분석학회지 Vol.29 No.2

The lack of consideration for statistical properties in Taguchi's three­level linear graphs is rectified. We propose a new set of linear graphs for the three­level orthogonal arrays according to the maximum resolution criterion. In the presence of two­factor interactions however, the serious bias of all the estimated effects as well as the estimated variance shows that these designs should not be employed. The various alternative designs are discussed.

[P3-41] Biological Activities of Ethanol extracts from Germination Specialty Rough Rice

Youn Ri Lee,In Guk Hwang,Koan Sik Woo,HeonㅡSang Jeong,Jae Hyeon Kim,Kee Jong Kim 한국식품영양과학회 2007 한국식품영양과학회 학술대회발표집 Vol.2007 No.10

Batteries: Cable‐Type Flexible Lithium Ion Battery Based on Hollow Multi‐Helix Electrodes (Adv. Mater. 38/2012)

Kwon, Yo Han,Woo, Sang‐,Wook,Jung, Hye‐,Ran,Yu, Hyung Kyun,Kim, Kitae,Oh, Byung Hun,Ahn, Soonho,Lee, Sang‐,Young,Song, Seung‐,Wan,Cho, Jaephil,Shin, Heon‐,Cheol,Kim, Je Y WILEY‐VCH Verlag 2012 Advanced Materials Vol.24 No.38

<P>The first ever demonstration of a cable‐type lithium ion battery architecture with outstanding omni‐directional flexibility is described by Je Young Kim, Heon‐Cheol Shin, and co‐workers on page 5192. The Front Cover image illustrates the unique battery architecture comprising a skeleton frame surrounding an empty space, that is, a hollow‐spiral anode with a multi‐helical structure. This design enables the battery to reliably power an LED screen or an MP3 player even under severe mechanical twisting and bending. </P>

Interactions between Chicken Salt-soluble Meat Proteins and Makgeolli Lees Fiber in Heat-induced Gels

Yun Sang Choi,Kwoan Sik Park,Hack Youn Kim,Hyun Wook Kim,Dong Heon Song,Hai Jung Chung,Ju Woon Lee,Cheon Jei Kim 한국축산식품학회 2011 한국축산식품학회지 Vol.31 No.6

The technological effects of Makgeolli lees fiber (0, 0.5, 1.0, 2.0, and 4.0%) on chicken salt-soluble breast meat proteins in a model system on proximate composition, physicochemical properties, and textural properties were investigated. Makgeolli lees fiber was obtained from Makgeolli brew processing, and the by-products showed good dietary fiber. The moisture and ash contents, water holding capacity, redness, yellowness, hardness, and apparent viscosity of chicken salt-soluble meat protein heat-induced gel systems with Makgeolli lees fiber were all higher than the control without Makgeolli lees fiber. However, protein solubility and electrophoretic patterns did not differ among the control and treatments with Makgeolli lees fiber samples. The chicken salt-soluble protein heat-induced gel systems incorporating Makgeolli lees fiber had improved water holding capacity, textural properties, and viscosity due to Makgeolli lees fiber addition. These results suggest that the addition of 4.0% Makgeolli lees fiber to gel is helpful to improve the physical properties of heat-induced gels.

Interactions between Chicken Salt-soluble Meat Proteins and Makgeolli Lees Fiber in Heat-induced Gels

Choi, Yun-Sang,Park, Kwoan-Sik,Kim, Hack-Youn,Kim, Hyun-Wook,Song, Dong-Heon,Chung, Hai-Jung,Lee, Ju-Woon,Kim, Cheon-Jei Korean Society for Food Science of Animal Resource 2011 한국축산식품학회지 Vol.31 No.6

The technological effects of Makgeolli lees fiber (0, 0.5, 1.0, 2.0, and 4.0%) on chicken salt-soluble breast meat proteins in a model system on proximate composition, physicochemical properties, and textural properties were investigated. Makgeolli lees fiber was obtained from Makgeolli brew processing, and the by-products showed good dietary fiber. The moisture and ash contents, water holding capacity, redness, yellowness, hardness, and apparent viscosity of chicken salt-soluble meat protein heat-induced gel systems with Makgeolli lees fiber were all higher than the control without Makgeolli lees fiber. However, protein solubility and electrophoretic patterns did not differ among the control and treatments with Makgeolli lees fiber samples. The chicken salt-soluble protein heat-induced gel systems incorporating Makgeolli lees fiber had improved water holding capacity, textural properties, and viscosity due to Makgeolli lees fiber addition. These results suggest that the addition of 4.0% Makgeolli lees fiber to gel is helpful to improve the physical properties of heat-induced gels.

Determination of cross section of composite breakwaters with multiple failure modes and system reliability analysis

Lee Cheol-Eung,Kim Sang-Ug,Park Dong-Heon 한국수자원학회 2018 한국수자원학회논문집 Vol.51 No.9

혼성제 케이슨에서 발생 가능한 활동, 전도 그리고 편심 경사하중에 의한 마운드 지지력에 대한 안정성을 다중 파괴모드 개념으로 해석하였다. 먼저 결정론적 해석에서는 활동 및 전도 그리고 마운드 지지력에 대한 한계 상태방정식을 이용하여 최소 안전율을 만족하는 혼성제 케이슨의 최소 단면을 산정할 수 있는 식을 유도하였다. 입사조건 및 마루높이 그리고 설치수심에 따른 결정론적 해석 결과에 의하면 활동 파괴모드와 마운드 지지력 파괴모드 간 상충이 발생되었다. 따라서 혼성제 케이슨의 설계단면을 결정론적으로 산정하는 경우에도 활동뿐만 아니라 전도와 마운드 지지력에 대한 다중 파괴모드를 동시에 고려하여야 한다. 한편 확률론적 해석에서는 활동에 의하여 결정된 단면에 대하여 다중 파괴모드에 대한 시스템 신뢰성 해석을 수행하였다. 혼성제 케이슨의 다중 파괴모드에 의한 제체의 시스템 파괴확률이 입사조건에 따라 매우 다르게 거동하는 것을 알 수 있었다. 또한 마루높이와 설치수심이 증가하여도 제체의 시스템 파괴확률이 증가하는 경향이 나타났다. 특히 시스템 신뢰성 해석의 일차 해석모형과 이차 해석모형의 결과들은 본 연구에서 수행된 조건들에서는 일치되는 거동 특성을 나타냈다. 그러나 파괴모드 사이의 상관성을 올바로 고려할 수 있는 이차 해석모형의 결과가 더 높은 정도를 갖는다. 다만 파괴모드 사이에 파괴확률이 상대적으로 크게 차이나는 경우에는 일차 해석모형도 간편하게 사용할 수 있다. The stabilities of sliding and overturning of caisson and bearing capacity of mound against eccentric and inclined loads, which possibly happen to a composite caisson breakwaters, have been analyzed by using the technique of multiple failure modes. In deterministic approach, mathematical functions have been first derived from the ultimate limit state equations. Using those functions, the minimum cross section of caisson can straightforwardly be evaluated. By taking a look into some various deterministic analyses, it has been found that the conflict between failure modes can be occurred, such that the stability of bearing capacity of mound decreased as the stability of sliding increased. Therefore, the multiple failure modes for the composite caisson breakwaters should be taken into account simultaneously even in the process of deterministically evaluating the design cross section of caisson. Meanwhile, the reliability analyses on multiple failure modes have been implemented to the cross section determined by the sliding failure mode. It has been shown that the system failure probabilities of the composite breakwater are very behaved differently according to the variation of incident waves. The failure probabilities of system tend also to increase as the crest freeboards of caisson are heightening. The similar behaviors are taken place in cases that the water depths above mound are deepening. Finally, the results of the first-order modal are quite coincided with those of the second-order modal in all conditions of numerical tests performed in this paper. However, the second-order modal have had higher accuracy than the first-order modal. This is mainly due to that some correlations between failure modes can be properly incorporated in the second-order modal. Nevertheless, the first-order modal can also be easily used only when one of failure probabilities among multiple failure modes is extremely larger than others.

Metal concentrations of Chinese herbal medicine products in the United States

Lee, Sun-Dong,Shin, Heon-Tae,Park, Hae-Mo,Ko, Seong-Gyu,Kook, Yoon-Bum,Ryu, Jin-Yeol,Kim, Hyun-Do,Hu, Howard,Park, Sung-Kyun Kyung Hee Oriental Medicine Research Center 2010 Oriental pharmacy and experimental medicine Vol.10 No.4

We determined arsenic, lead, mercury and cadmium concentrations in Chinese herbal medicines sold in the United States by medical use parts. 54 kinds of herbal products including 9 medical use parts (radix, rhizoma, cortex, pericarpium, fructus, lignum, semen, folium, and herba) were analyzed using inductively coupled plasma-mass spectrometry for arsenic, lead and cadmium, and using mercury analyzer for mercury. Arsenic (median concentration, 0.25 mg/g), mercury (0.20 mg/g), lead (3.78 mg/g) and cadmium (0.39 mg/g) were detected in 71%, 54%, 35%, and 18% of 143 herbal medicine samples, respectively. A total of 27% and 12% of 143 products analyzed contained mercury and cadmium above the regulatory standards. Herba and folium (leaves of herbal plants) were the most contaminated parts from metals, whereas pericarpium, lignum and semen (outer layers and seeds) were less contaminated. This study suggests that metal contamination is different by medical use parts. Our findings provide further evidence that efforts to protect people using traditional remedies from metal intoxication should be made to enforce the regulatory standards.

Effects of Pre-rigor Salting on the Physicochemical and Textural Properties of Ground Duck Breast Muscle

Lee, Sang-Hun,Choi, Ji-Hun,Choi, Yun-Sang,Kim, Hack-Youn,Kim, Hyun-Wook,Park, Jae-Hyun,Song, Dong-Heon,Kim, Yong-Jae,Kim, Cheon-Jei Korean Society for Food Science of Animal Resource 2012 한국축산식품학회지 Vol.32 No.6

The pre-rigor salting effects on physicochemical properties of ground duck breast muscle were evaluated in this study. The pre-rigor salting treatments were prepared within 30 min after slaughter, the duck breast muscles after post mortem 48 h were used to prepare the post-rigor treatments. The pre-rigor salting treatment had significantly higher pH value than post-rigor salting treatment (p<0.001), and all pre-rigor salting treatments showed a significant higher pH value. As a result, the pre-rigor salting treatment showed increased water holding capacity and decreased cooking loss compared to those in the post-rigor salting treatment. No significant differences in redness and yellowness were observed among the treatments (p>0.05). The increased solubility of salt-soluble proteins in the pre-rigor salting treatment leads to increase the hardness, gumminess, and chewiness. Also, the pre-rigor salted duck breast muscle had similar textural properties compared to those of post-rigor duck breast muscle containing sodium tri-polyphosphate (STPP). The 2-thiobarbituric acid (TBA) values of all treatments were ranged from 0.121 to 0.177 mg/kg. The lowest TBA value was observed for post-rigor duck breast muscle containing STPP, however, pre-rigor salting did not influence lipid oxidation of ground duck breast muscle. Therefore, the pre-rigor salting method, especially a single addition of sodium chloride to pre-rigor muscle, is more efficient method for improving cooking loss.

The role of Th17 inflammation in the non-eosinophilic asthma (초)

( Sang Min Lee ),( Hyun Seung Lee ),( So Hee Lee ),( Se Hoon Kim ),( Heung Woo Park ),( Yoon Seok Chang ),( Sun Sin Kim ),( Sang Heon Cho ),( Kyung Up Min ),( You Young Kim ) 대한내과학회 2008 대한내과학회지 Vol.75 No.1S

USEFULNESS OF SIMPLE SHIELDING TECHNIQUE USING MULTILEAF COLLIMATOR IN BREAST RADIATION THERAPY

Lee, Kyu Chan,Lee, Seok Ho,Lee, Seung Heon,Sung, Kihoon,Ahn, So Hyun,Choi, Jinho,Dong, Kap Sang,Kim, Hyo Jin,Chun, Yong Seon,Park, Heung Kyu The Korean Association for Radiation Protection 2014 방사선방어학회지 Vol.39 No.4

This study was designed to assess whether the conventional tangential technique, using a multileaf collimator (MLC), allows a reduced dose to the organs at risk (OAR) in breast radiation therapy. A total of forty right and left 20 for each breast cancer patients that underwent radiation therapy after breast conserving surgery were included in this study. For each patient, the planning target volume (PTV) and OAR (heart, left anterior descending artery (LAD), liver and lung) were defined and dose distribution were produced for conventional tangential beams using 6 MV photons. The treatment plans were made using the following two techniques for all patients. For the first plan (P1), MLC was designed to shield as much of OAR as possible without compromising the coverage of PTV. In the second plan (P2), the treatment plan was created without using MLC. Dose-volume histograms for OARs were calculated for all plans. For left breast cancer, the percentage of maximum dose ($D_{max%}$) and mean dose ($D_{mean%}$) of OARs (heart and LAD) were calculated, and for right breast cancer, the percentage of the mean dose ($D_{mean%}$) of the liver was calculated. The $D_{mean%}$ of the lung was calculated in all patients. The mean values of $D_{max%}$ of the heart ($86.9{\pm}19.5%$ range, 35.1-100.6%) in P1 were significantly lower than in P2 ($98.3{\pm}3.4%$ range, 91.7-105.2%) (p=0.001). The mean values of $D_{max%}$ of LAD ($78.4{\pm}22.5%$ range, 26.5-99.7%) in P1 was significantly lower than in P2 ($93.3{\pm}8.1%$ range, 67.9-102.1%) (p<0.001). In P1, the mean values of $D_{mean%}$ of the liver ($4.8{\pm}2.0%$) were significantly lower than in P2 ($6.2{\pm}2.5%$) (p<0.001). The mean values of $D_{mean%}$ of the lung were significantly lower in P1 ($9.3{\pm}2.3%$) than in P2 ($9.7{\pm}2.4%$) (p<0.001). P1, by using MLC, allows a significantly reduced dose to OAR compared with P2. We can suggest that it is reasonable to routinely use MLC in the conventional tangential technique for breast radiation therapy considering the primary tumor location.