Fabrication and characterization of fluorohydroxyapatite nanocrystals/poly(d,l-lactide) composite scaffolds

L. Cheng,S.M. Zhang,P.P. Chen,S.L. Huang,L. Liu,W. Zhou,J. Liu,H. Gong,Q.M. Luo 한국물리학회 2007 Current Applied Physics Vol.7 No.s1

Poly(D,L-lactide) (PDLLA)/uorohydroxyapatite nanocrystals (nano-F-HA) porous scaolds were successfully fabricated through asolvent-casting and particulate-leaching technique. Nano-HA/PDLLA scaold and PDLLA scaold were prepared by using the sameprocess for comparison. The structure, phase and morphology of the nanocomposite scaolds were observed by SEM. The results indi-cated that F-HA nanocrystals were homogeneously dispersed in the PDLLA matrix. The porosity of the scaolds was up to 90%, andmacropores and micropores coexisted and interconnected throughout the scaolds. Cell culture experiments demonstrated that the nano-F-HA/PDLLA scaffold had the best adhesion tendency to chondrocytes among the scaffolds investigated.

DISCOVERY OF X-RAY PULSATION FROM THE GEMINGA-LIKE PULSAR PSR J2021+4026

Lin, L. C. C.,Hui, C. Y.,Hu, C. P.,Wu, J. H. K.,Huang, R. H. H.,Trepl, L.,Takata, J.,Seo, K. A.,Wang, Y.,Chou, Y.,Cheng, K. S. IOP Publishing 2013 ASTROPHYSICAL JOURNAL LETTERS - Vol.770 No.1

<P>We report the discovery of an X-ray periodicity of similar to 265.3 ms from a deep XMM-Newton observation of the radio-quiet gamma-ray pulsar, PSR J2021+4026, located at the edge of the supernova remnant G78.2+2.1 (gamma-Cygni). The detected frequency is consistent with the gamma-ray pulsation determined by the observation of the Fermi Gamma-ray Space Telescope at the same epoch. The X-ray pulse profile resembles the modulation of a hot spot on the surface of the neutron star. The phase-averaged spectral analysis also suggests that the majority of the observed X-rays have thermal origins. This is the third member in the class of radio-quiet pulsars with significant pulsations detected from both X-ray and gamma-ray regimes.</P>

Selection for Duration of Fertility and Mule Duck White Plumage Colour in a Synthetic Strain of Ducks (Anas platyrhynchos)

H.C. Liu,J.F. Huang,S.R. Lee,H.L. Liu,C.H. Hsieh,C.W. Huang,M.C. Huang,C. Tai,J.P. Poivey,R. Rouvier,Y.S. Cheng 아세아·태평양축산학회 2015 Animal Bioscience Vol.28 No.5

A synthetic strain of ducks (Anas platyrhynchos) was developed by introducing genes for long duration of fertility to be used as mother of mule ducklings and a seven-generation selection experiment was conducted to increase the number of fertile eggs after a single artificial insemination (AI) with pooled Muscovy semen. Reciprocal crossbreeding between Brown Tsaiya LRI-2 (with long duration of fertility) and Pekin L-201 (with white plumage mule ducklings) ducks produced the G0. Then G1 were intercrossed to produce G2 and so on for the following generations. Each female duck was inseminated 3 times, at 26, 29, and 32 weeks of age. The eggs were collected for 14 days from day 2 after AI. Individual data regarding the number of incubated eggs (Ie), the number of fertile eggs at candling at day 7 of incubation (F), the total number of dead embryos (M), the maximum duration of fertility (Dm) and the number of hatched mule ducklings (H) with plumage colour were recorded. The selection criterion was the breeding values of the best linear unbiased prediction animal model for F. The results show high percentage of exhibited heterosis in G2 for traits to improve (19.1% for F and 12.9% for H); F with a value of 5.92 (vs 3.74 in the Pekin L-201) was improved in the G2. Heritabilities were found to be low for Ie (h2 = 0.07±0.03) and M (h2 = 0.07±0.01), moderately low for Dm (h2 = 0.13±0.02), of medium values for H (h2 = 0.20±0.03) and F (h2 = 0.23±0.03). High and favourable genetic correlations existed between F and Dm (rg = 0.93), between F and H (rg = 0.97) and between Dm and H (rg = 0.90). The selection experiment showed a positive trend for phenotypic values of F (6.38 fertile eggs in G10 of synthetic strain vs 5.59 eggs in G4, and 3.74 eggs in Pekin L-201), with correlated response for increasing H (5.73 ducklings in G10 vs 4.86 in G4, and 3.09 ducklings in Pekin L-201) and maximum duration of the fertile period without increasing the embryo mortality rate. The average predicted genetic response for F was 40% of genetic standard deviation per generation of selection. The mule ducklings’ feather colour also was improved. It was concluded that this study provided results for a better understanding of the genetics of the duration of fertility traits in the common female duck bred for mule and that the selection of a synthetic strain was effective method of improvement.

Selection for Duration of Fertility and Mule Duck White Plumage Colour in a Synthetic Strain of Ducks (Anas platyrhynchos)

Liu, H.C.,Huang, J.F.,Lee, S.R.,Liu, H.L.,Hsieh, C.H.,Huang, C.W.,Huang, M.C.,Tai, C.,Poivey, J.P.,Rouvier, R.,Cheng, Y.S. Asian Australasian Association of Animal Productio 2015 Animal Bioscience Vol.28 No.5

A synthetic strain of ducks (Anas platyrhynchos) was developed by introducing genes for long duration of fertility to be used as mother of mule ducklings and a seven-generation selection experiment was conducted to increase the number of fertile eggs after a single artificial insemination (AI) with pooled Muscovy semen. Reciprocal crossbreeding between Brown Tsaiya LRI-2 (with long duration of fertility) and Pekin L-201 (with white plumage mule ducklings) ducks produced the G0. Then G1 were intercrossed to produce G2 and so on for the following generations. Each female duck was inseminated 3 times, at 26, 29, and 32 weeks of age. The eggs were collected for 14 days from day 2 after AI. Individual data regarding the number of incubated eggs (Ie), the number of fertile eggs at candling at day 7 of incubation (F), the total number of dead embryos (M), the maximum duration of fertility (Dm) and the number of hatched mule ducklings (H) with plumage colour were recorded. The selection criterion was the breeding values of the best linear unbiased prediction animal model for F. The results show high percentage of exhibited heterosis in G2 for traits to improve (19.1% for F and 12.9% for H); F with a value of 5.92 (vs 3.74 in the Pekin L-201) was improved in the G2. Heritabilities were found to be low for Ie ($h^2=0.07{\pm}0.03$) and M ($h^2=0.07{\pm}0.01$), moderately low for Dm ($h^2=0.13{\pm}0.02$), of medium values for H ($h^2=0.20{\pm}0.03$) and F ($h^2=0.23{\pm}0.03$). High and favourable genetic correlations existed between F and Dm ($r_g=0.93$), between F and H ($r_g=0.97$) and between Dm and H ($r_g=0.90$). The selection experiment showed a positive trend for phenotypic values of F (6.38 fertile eggs in G10 of synthetic strain vs 5.59 eggs in G4, and 3.74 eggs in Pekin L-201), with correlated response for increasing H (5.73 ducklings in G10 vs 4.86 in G4, and 3.09 ducklings in Pekin L-201) and maximum duration of the fertile period without increasing the embryo mortality rate. The average predicted genetic response for F was 40% of genetic standard deviation per generation of selection. The mule ducklings' feather colour also was improved. It was concluded that this study provided results for a better understanding of the genetics of the duration of fertility traits in the common female duck bred for mule and that the selection of a synthetic strain was effective method of improvement.

Upgraded high time-resolved x-ray imaging crystal spectroscopy system for J-TEXT ohmic plasmas (4 pages)

Jin, W.,Chen, Z.Y.,Huang, D.W.,Li, Q.L.,Yan, W.,Luo, Y.H.,Lee, S.G.,Shi, Y.J.,Huang, Y.H.,Tong, R.H. AMERICAN INSTITUTE OF PHYSICS 2014 Review of scientific instruments Vol.85 No.2

Effect of Corticosterone Administration on Small Intestinal Weight and Expression of Small Intestinal Nutrient Transporter mRNA of Broiler Chickens

Hu, X.F.,Guo, Yuming,Huang, B.Y.,Zhang, L.B.,Bun, S.,Liu, D.,Long, F.Y.,Li, J.H.,Yang, X.,Jiao, P. Asian Australasian Association of Animal Productio 2010 Animal Bioscience Vol.23 No.2

The effects of corticosterone (CORT) administration on the weight of small intestine and the expression of nutrient transporter mRNA in the small intestine of broiler chickens (Gallus gallus domesticus) were investigated. One hundred and eight sevenday-old birds were randomly divided into two equal groups comprising a control group (CTRL) and an experimental group (CORT). CTRL birds were fed a basal diet and the CORT birds were fed a basal diet containing 30 mg corticosterone/kg from d 8 to 21. At 21 d of age, average daily feed intake (ADFI), serum corticosterone level, small intestinal absolute wet weight and relative weight, and relative abundance of SGLT1, CaBP-D28k, PepT1 mRNA in the duodenum and L-FABP mRNA in the jejunum were determined. The results showed that serum corticosterone level, liver weight and small intestinal relative weight (small intestinal wet weight/body weight) of CORT chickens were about 30.15%, 26.72% and 42.20% higher, respectively, than in the CTRL group (p<0.05). CORT birds had relative mRNA abundance of CaBP-D28k and PepT1 in the duodenum, and L-FABP in the jejunum which was 1.77, 1.37 and 1.94 fold higher, respectively, than in the CTRL group (p<0.05); the relative abundance of SGLT1 was 1.67 fold higher than in the CTRL group (p = 0.097). ADFI, small intestinal wet weight and length in CORT-treated broiler chickens was about 29.11%, 31.12% and 12.35% lower, respectively, than in the CTRL group (p<0.05). In conclusion, corticosterone administration lowered the wet weight but increased the relative weight of the small intestine and the expression of intestinal nutrient transporter mRNA of broiler chickens.

Four-dimensional calibration turntable of the motional Stark effect diagnostic on EAST

Huang, X.,Liu, D. M.,Liu, C.,Fu, J.,Wan, B. N.,Lyu, B.,Wu, Z. W.,Holcomb, C. T.,Ko, J.,Rowan, W. L.,Huang, H.,Miao, G. Z. American Institute of Physics 2018 Review of scientific instruments Vol.89 No.10

BB-BC optimization algorithm for structural damage detection using measured acceleration responses

J.L. Huang,Z. R. Lu 국제구조공학회 2017 Structural Engineering and Mechanics, An Int'l Jou Vol.64 No.3

This study presents the Big Bang and Big Crunch (BB-BC) optimization algorithm for detection of structure damage in large severity. Local damage is represented by a perturbation in the elemental stiffness parameter of the structural finite element model. A nonlinear objective function is established by minimizing the discrepancies between the measured and calculated acceleration responses (AR) of the structure. The BB-BC algorithm is utilized to solve the objective function, which can localize the damage position and obtain the severity of the damage efficiently. Numerical simulations have been conducted to identify both single and multiple structural damages for beam, plate and European Space Agency Structures. The present approach gives accurate identification results with artificial measurement noise.

Design load-carrying capacity estimates and an improved wooden shore setup

Huang, Y.L.,Lin, Y.C.,Lee, C.F.,Chen, H.J.,Yen, T. Techno-Press 2004 Structural Engineering and Mechanics, An Int'l Jou Vol.17 No.2

The design load-carrying capacities of wooden shores depend on factors, such as the wood species and properties, and construction methods. This paper focuses on the construction methods, including an upright single shore, group of upright shores, group of inclined shores, butt connections and lap connections. This paper reports experiments to obtain critical loads and then developed an empirical equation based on Euler' formula for the critical loads and design load-carrying capacities. The test results show that the critical loads for an upright single wooden shore are greater than the average values for a group of upright shores, and the latter are greater than the average values for a group of inclined shores. Test results also show that the critical loads become smaller when butt or lap connections are used, butt connections possessing greater critical loads than lap connections. Groups of inclined shores are very popular at work sites because they have some practical advantages even though they actually possess inferior critical loads. This paper presents an improved setup for constructing groups of inclined shores. With this method, the inclined shores have larger critical loads than upright shores. The design load-carrying capacities were obtained by multiplying the average critical loads by a resistance factor (or strength reduction factor, ${\phi}$) that were all smaller than 1. This article preliminarily suggests ${\phi}$ factors based on the test results for the reference of engineers or specification committees.

Preparation of hollow porous SnO₂ microcubes and their gas-sensing property

Huang, J.,Wang, L.,Gu, C.,Shim, J.J. North-Holland 2014 Materials letters Vol.136 No.-

Hollow porous SnO<SUB>2</SUB> microcubes were obtained through a facile chemical solution route with subsequent calcination and acid-washing process. The process of inducing porosity starts with a crystalline single-phase MnSn(OH)<SUB>6</SUB> precursor formed by the co-precipitation of the metal ions from the aqueous solution. Thermal decomposition of the precursors leads to an intimate mixture of Mn<SUB>3</SUB>O<SUB>4</SUB> and porous tetragonal SnO<SUB>2</SUB>. The hollow porous SnO<SUB>2</SUB> microcubes are obtained after a simple acid-washing process. Furthermore, the gas-sensing properties of the hollow porous SnO<SUB>2</SUB> microcubes were investigated in toxic volatile organic compounds, such as formaldehyde, toluene, benzene, methanol, acetone, and ethanol. The detection limits of formaldehyde and toluene were approximately 0.08 and 0.19ppm, respectively, which substantially benefitted from their hollow porous structure and large surface area.