http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Advanced Indentation System을 이용한 연성 파괴인성 평가식의 모델링
주장복,이정석,심홍석,이승건,권동일 대한금속재료학회 2004 대한금속·재료학회지 Vol.42 No.1
Fracture properties of various structural steels were determined non-destructively using the advanced indentation system (AIS), which is developed on the basis of continuous indentation technique. In this study, conventional critical strain model was modified to predict the ductile fracture toughness from the AIS data. In deriving the ductile fracture toughness model, fracture strain and characteristic length were estimated using the stress triaxiality and the work-hardening exponent. AIS tests were conducted on carbon steels, stainless steels, aluminum alloys and copper alloys. For all these materials, the results of indentation test were compared to those of the standard fracture toughness test methods, which shows that the present analysis can predict successfully the ductile fracture toughness of structural steels.
손상평가도를 이용한 용접구조물의 균열형 결함에 대한 사용적합성 평가
李精錫,朱章福,張宰溢,金禹植,고영대,權東一 대한금속재료학회 2002 대한금속·재료학회지 Vol.40 No.10
Flaws nucleated during operation of structures such as nuclear power plants, petroleum facilities and gas equipment raise many safety problems, and thus the integrity assessment of crack-like flaws in structures has been very important. Since large-scale structures include weldments with complex micro-structures and inhomogeneous material properties, it is essential to consider both metallurgical and mechanical factors. In this study, a methodology for integrity assessment in welded structures was developed based on API 5L X65 grade natural gas pipeline (an approximately 2400 ㎞ pipeline in Korea). A failure assessment diagram(FAD), which includes all failure modes from linear elastic fracture to plastic collapse, was used for integrity and fitness-for-service(FFS) assessment of the pipeline. Since tensile properties and fracture toughness of base metal, weld metal and heat affected zone(HAZ) are required for the FAD, tensile tests and fracture toughness tests were performed on each region. In particular, the evaluation of representative properties of HAZ make it possible to assess FFS accurately by using the HAZ-based FAD when crack-like flaws exist in HAZ. This HAZ-based FAD is different from current codes, which assess integrity by the material properties of weld metal or base metal even when flaws exist in HAZ.
사회적기업 종사자의 이직/잔류 의도에 제도적 요인이 미치는 영향
장동일(Jang, Dongil),한준(Han, Joon) 충북대학교 국제개발연구소 2019 사회적경제와 정책연구 Vol.9 No.3
사회적기업의 1년간 입/이직률은 근로자의 3분의 1 정도로 매우 높다. 이와 관련해 선행 연구는 종사자의 이직/잔류 의도에 개인 및 조직 차원의 요인이 주는 영향을 다양한 측면에서 확인하였다. 반면 제도 차원의 요인에 대한 관심은 상대적으로 미비했으며 이직은 구성원과 조직 간의 미스매치로서 프레이밍 되어왔다. 따라서 이번 연구는 2018 사회적가치서베이에 참여한 사회적기업 종사자 362명의 응답을 통해 사회적기업 및 사회 제도에 대한 일반화된 신뢰가 종사자의 이직/잔류 의도에 미치는 영향을 살펴보았다. 또한 정부 지원금 수여, Social Progress Credit 참여의 효과를 살펴봄으로써 외재적 개입을 통한 개선의 가능성을 함께 확인하였다. 연구 결과는 사회적기업 제도 및 사회제도 전반에 대한 신뢰가 이직 의도를 낮추고 잔류 의도를 높임을 보여주었다. 한편 사회문제 해결의 역할이 겹치는 정부의 효과성이 크다 인식할수록 이직 의도는 높았다. 마지막으로 정부 지원금 수여는 이직 의도를 낮추고 Social Progress Credit 참여는 잔류 의도를 높임을 확인할 수 있었다. 이 연구의 주된 기여는 사회적기업 종사자의 이직이 사회적기업 조직 간의 이동이 아닌 사회적기업 조직 장으로부터의 이탈일 수 있음을 보여준 점에 있다. In Korea, social enterprises’ turnover rate is one-third of its members. Accordingly, several studies have examined the effects of individual and organizational factors of turnover and retention in various aspects. On the other hand, interests in institutional factors has been relatively insufficient, and turnover has been conventionally framed as a mismatch between organizations and their constituents. Therefore, this study examined the effect of generalized trust on social enterprise and social system on turnover and retention through the response of 362 social enterprise workers participated in the 2018 social value survey. We also examined the effects of government grants and Social Progress Credit, to confirm the possibility of improvement through external intervention. The results of the study showed that trust on social enterprise system and social system reduced the intention to leave and increased the intention to stay. On the other hand, the greater the perception of the effectiveness of the government that overlaps the role of social problem solving, the higher the intention to leave. Lastly, government grants lower the intention to leave and participation in Social Progress Credit increases the intention to stay. The main contribution of this paper is its demonstration of the factors which lead social entrepreneurs to leave the field, not just to leave the firm.
장동일(Jang, Dongil),안재광(Ahn, Jae-Kwang),권영우(Kwon, Youngwoo),곽동엽(Kwak, Dongyoup) 대한토목학회 2021 대한토목학회논문집 Vol.41 No.5
스마트폰은 3축 방향 가속도를 기록할 수 있는 MEMS 센서를 포함하고 있고 무선통신망 장치가 내장되어 실시간으로 진동 데이터를 관측하고 전송할 수 있다. 이러한 특징을 기반으로 스마트폰을 지진관측망으로 사용하는 데 큰 장점으로 작용한다. 현재 국내 영남권에 시범적으로 279개의 스마트폰이 설치되어 지진관측망으로 사용되고 있다. 본 연구에서는 스마트폰 관측 지진기록의 유효성을 확인하기 위해 국가지진관측망의 지진관측소 기록과 스마트폰의 관측기록을 비교하였다. 비교에 활용된 데이터는 2019년에 발생한 5개의 지진에 대한 기록이며, 기상청과 한국지질자원연구원의 지진관측소에서 기록한 321개의 데이터와 스마트폰에서 기록한 145개의 데이터이다. 최대지반가속도(PGA)를 추출한 후, 지반운동예측식(GMPE)을 스마트폰 기록에 적용하여 PGA와 최대수평가속도(PHA)의 잔차를 분석하였다. 분석 결과, 스마트폰 MEMS 센서 관측기록의 자연대수 평균 잔차는 0.59로 약 1.8배 큰 PHA를 관측하였다. 또한, 스마트폰 MEMS 센서의 설치 층수가 높아질수록 잔차가 줄어드는 경향을 확인하였는데, 이는 지진파 응답스펙트럼의 경향과 비슷하다. A smartphone (SMP) includes a MEMS sensor that can record 3-components motions and has a wireless network device to transmit data in live. These features and relatively low maintenance costs are the advantage of using SMPs as an auxiliary seismic observation network. Currently, 279 SMPs are monitoring seismic motions. In this study, we compare the SMP records with the seismic station (SS) records to validate SMP records. The data used for comparison are records for five earthquakes that occurred in 2019, which are 321 SS data recorded by the Korea Meteorological Administration and the Korea Institute of Geoscience and Mineral Resources and 145 recorded by SMPs. The analysis shows that the event-term corrected average residual of the SMP MEMS sensor records is 0.59 which indicating that the peak horizontal acceleration by SMP is 1.8 factor bigger than the peak ground acceleration by SS. In addition, the residuals tend to decrease as the installation floor of the smartphone MEMS sensor increases, which is the similar trend with response spectra from SS.
강구조물에 대한 현장에서의 비파괴적 인장물성 평가 기술 개발
손동일 ( Son Dongil ),최열 ( Choi Yeol ),장재일 ( Jang Jae-il ),권동일 ( Kwon Dongil ) 한국구조물진단유지관리공학회 2001 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.5 No.1
A newly developed Advanced Indentation System (AIS), which is a portable and nondestructive system for evaluating tensile properties, was used to measure stress-strain behavior of steel structure. For all test materials and conditions, the AIS-derived results were in good agreement with those from conventional standard test method. Furthermore, the nondestructive AIS test results rigorously indicated the various levels of degradation of materials. Examples of the test results are given and potential applications of the AIS to assess the integrity of aging structures are briefly discussed.