http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
마이크로스트립 소자의 소형화를 위한 천공된 마이크로스트립 Slow-wave 구조 및 해석
이계안,윤호성,이해영 대한전자공학회 1998 電子工學會論文誌, D Vol.d35 No.11
수동 소자를 위한 대표적 구성요소의 하나인 마이크로스트립을 이용하는 소자는 넓은 점유면적으로 인하여 고주파 집적회로의 소형화를 제한하는 중요한 요인이 되고 있다. 본 논문에서는 신호의 진행 방향으로 마이크로스트립 도체를 주기적으로 천공함으로써 slow-wave 효과를 얻는 천공된 마이크로스트립을 제안하고 해석과 실험을 통하여 성능의 우수성을 확인하였다. 천공된 마이크로스트립의 특성 임피던스 정합(50 Ω)과 Q 값 등은 기존의 변조된 폭을 갖는 마이크로스트립보다 향상됨을 관찰하였다. 본 천공된 마이크로스트립은 그 구조의 단순함으로 보다 우수한 Q 값을 얻을 수 있으며 초고주파 소자의 소형화에 매우 효과적으로 이용될 것이다. The use of microstrip is very common for various passive microwave devices because of the rather simple and planar structure. However, many microstrip devices require fairly large surface areas, which results in real estate problems of finite substrates. In this paper, we proposed a perforated microstrip with longitudinal slow-wave effect and characterized experimentally and theoretically. The impedance matching to the reference impedance(50 $\Omega$) and the quality factor are greatly improved compared to the conventional slow-wave structure with modulated strip. Because of the structural simplicity, it can be easily applied to miniaturize many microstrip devices.
밀리미터파 플립 칩 실장구조에서의 누설파와 간섭효과 억제방법
이계안,이해영 대한전자공학회 1998 電子工學會論文誌, D Vol.d35 No.4
Leakage phenomena of flip-chip structures on common GaAs and alumina main substrates are characterized using the spectral domain approach to reduce the possible chip-to-chip crosstald and transmission resonance. We have found taht the longitudinal section magnetic mode is dominant for the coplanar waveguide leakage andthe leakage can be suppreassed by properly managing the gap height and the main substrate thickness in addition to the dielectric constant. These calculation results will be helpful for designing and flip-chip packagaing of high-frequency integrated circuits.
저밀도 폴리에틸렌에서 도데실 알콜의 혼합량에 따른 트리이 현상 변화에 관한 연구
金正洙,李昌熙,李桂安,金相準 弘益大學校 1990 弘大論叢 Vol.22 No.2
For the purpose of deriving a method of inhibiting tree growth, dodecyl alchol( ?? ) is mixed with low density polyethylene(LDPE) by four different concentration, i.e., 2, 5, 8, 10%. Then under the environment of keeping to apply a.c., 15[kv], the time on which the first tree phenonenum will be reached, is observed. It is resulted that, on the condition of being within 8%, the more the mixing quantity be, the longer the tree inception time is, on the other hand, through to 10%, the time get increased quite slowly. Thus, we take samples mixed with 10% dodecyl alcohol in LDPE. After the initial tree is generated to the point of 300[㎛] under the bias, the bias would abruptly be dropped to 7.5[kv]. After that time, without changing the applying voltage, it is also investigated that the extinguishing time interval gets shorter on the following sequence of the solid state, the freezing, point, and the liquid state, in trun.
Nannochloropsis oceanica로부터 용매추출법을 이용한 미세조류 오일 회수
박지연 ( Ji Yeon Park ),이계안 ( Gye An Lee ),김근용 ( Keun Yong Kim ),김기용 ( Ki Yong Kim ),최선아 ( Sun A Choi ),정민지 ( Min Ji Jeong ),오유관 ( You Kwan Oh ) 한국화학공학회 2014 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.52 No.1
본 연구에서는 Nannochloropsis oceanica로부터 바이오디젤 원료유로 활용하기 위한 미세조류 오일을 추출하였다. 용매추출법을 이용하여 오일을 추출하였으며, 미세조류의 건식 및 습식 조건에서 오일 추출률(yield) 및 오일 추출 효 율(efficiency)을 비교하였다. N. oceanica는 지방산 함량이 317.8 mg/g cell으로 건조중량 대비 30% 이상의 높은 오일 함량을 나타내었으며, 미세조류의 건식 조건에서 습식 조건보다 높은 오일 추출률을 나타내었다. 사용된 용매에 대해 서 헥산 < 헥산-메탄올 < 클로로포름-메탄올 순으로 오일 추출률이 증가하였다. 그러나 추출된 오일의 지방산 함량을 분석한 결과, 오일 추출률이 증가할수록 지방산 함량은 감소하여 엽록소와 같은 불순물을 포함하고 있는 것으로 나타났다. 따라서 오일 추출률과 지방산 함량을 고려한 오일 추출 효율은 건식 조건에서 헥산-메탄올 이용 추출에서 82.6% 의 가장 높은 효율을 나타내었고, 습식 조건에서는 클로로포름-메탄올 이용 추출에서 88.0%로 가장 높은 효율을 나타내었다. 따라서 경제적으로 미세조류의 건조가 가능한 경우에는 헥산-메탄올을 사용하고, 건조 비용이 높은 경우에는 습식 조건에서 클로로포름-메탄올을 사용한 용매추출법이 바람직하다. In this study, oil as a source of biodiesel from Nannochloropsis oceanica was extracted using organic solvent. The oil extraction yield and efficiency from dry and wet microalgae were investigated. The initial fatty acids content of the N. oceanica was 317.8 mg/g cell showing a high oil content over 30%. The yield from dry microalgae was higher than that from wet microalgae due to the inhibition of water. The yield by chloroform-methanol was the highest and the yield by hexane was the lowest. However, the total fatty acids contents with the chloroform-methanol were 678.7 and 778.2 mg/g oil under dry and wet conditions, respectively. The high oil extraction yield by chloroform-methanol reflected the fact that the extracted oil contained a high level of impurity. The hexane-methanol extraction from dry N. oceanica showed high oil extraction efficiency, 82.6%. The chloroform-methanol extraction under wet condition also showed high efficiency, 88.0%. While the hexane-methanol extraction from dry microalgae is desirable under low drying cost, the chloroform-methanol extraction from wet microalgae is desirable under high drying cost.