http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전상백 ( Sang Back Jeon ),김평중 ( Pyoung Joong Kim ),김상수 ( Sang Su Kim ),주재식 ( Jae Sik Ju ),이용화 ( Young Hwa Lee ),장대수 ( Dae Soo Chang ),이정의 ( Jung Uie Lee ),박승윤 ( Seoung Yun Park ) 한국환경분석학회 2012 환경분석과 독성보건 Vol.15 No.3
We measured various geochemical parameters including texture, chemical oxygen demand (COD), ignition loss (IL), acid volatile sulfide (AVS), nonmetallics, alkali metals, alkaline earth metals, transition elements and heavy metals in order to determine the characteristics of spatial distribution in the surface sediments collected from 19 stations in the Deukryang Bay. It was observed that chemical oxygen demand (COD) and acid volatile sulfide in most stations were below the criteria proposed by Japan Fisheries Resource Conservation Association (JFRCA) to evaluate the pollution status of marine sediment. The pollution level was estimated by Enrichment factor (Ef) and Index of geoaccumulation (Igeo). For elements, the Enrichment factors (Ef) were smaller than 1 except for arsenic (As) which had highest Ef value of 1.72 and the Index of geoaccumulation (Igeo) for nonmetallic and metallic elements ranged between 1 and 2, indicating that the pollution levels by these elements were not serious. However, for the sustainability of the Deukryang Bay, continous monitoring should be necessary for with these harmful elements.
손태원,박대원,주재백,정도원,조한상 한국화학공학회 2001 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.39 No.5
전기화학적 처리법에 의해 폐수내의 유기물과 질소의 처리에 대한 연구를 수행하였다. 이 방법을 이용하여 빠른 시간내에 유기물을 90%이상 제거가 가능하였다. 전류밀도가 증가할수록 반응속도 상수의 증가로 처리효율이 증가하였다. 본 실험을 통하여 DSA전극을 이용한 각종 산업현장의 폐수내에 유기화합물과 질소의 처리가 가능함을 확인하였다. This research has been performed to study electrochemical treatment of organic compounds and nitrogen in wastewater. Organic compounds were removed through electrochemical treatment. The removal rate of organic compounds as increased with the increasing current density(A/㎠). Because reaction rate is increased. The results in this study suggested that DSA electrode was capable of removing organic compounds and nitrogen from industrial wastewater.
조원일,손성호,정도원,주재백,박대원 한국화학공학회 2000 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.38 No.1
전기 화학적 처리법에 의한 폐수 내의 시안의 산화 및 구리의 회수에 대한 연구를 수행하였다. 전해 처리를 이용하여 폐수 내의 시안 및 구리를 80%이상 제거할 수 있었으며, 수리학적 체류시간 및 극간거리가 감소할수록, 전압이 증가할수록 시안의 산화율 및 구리의 추출률은 증가하였으며, 또한 전압이 감소할수록, 극간 거리가 감소할수록 양극 및 음극의 전류효율은 증가하였으나, 수리학적 체류시간은 전류효율에 큰 영향을 주지 않았다. This research has been performed to study the oxidation of cyanide and recovery of upper in wastewater. The concentration of cyanide and copper reduced by 80% through the electrochemical treatment. The oxidation rate of cyanide and the recovery rate of copper increased as the hydraulic retention time and the distance between cathode and anode decreased. And, those rates were proportional to the increment of applied potential. Catholic and anodic current efficiency however increased as the potential and the distance between cathode and anode decreased. The hydraulic retention time showed no effect on the current efficiency.
CVI 를 이용한 이염화이메틸규소로부터의 탄화규소 증착에 의한 화이버강화 세라믹 복합재료 제조의 연구
김정우,조민수,정귀영,주재백,유재훈 한국화학공학회 1996 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.34 No.4
이염화이메틸규소와 수소로부터 화학증기침투(CVI)에 의해 옷감형 탄소 화이버프리폼에 탄화규소를 증착시켜 탄소/탄화규소 복합재료가 제조되었다. 이염화이메틸규소는 950℃이상의 온도에서는 거의 전부 열분해되었다. 증착속도는 압력 즉 이염화이메틸규소의 농도가 증가할수록 증가하였다. 또한 증착온도가 올라갈수록 증가하다가 1000℃ 이상의 고온에서는 부반응에 의해 감소하였다. 탄화규소는 샘플 내부 화이버 주위에 고르게 증착되었으며 β-형임이 확인되었다. 이염화이메틸규소의 1차 증착 반응속도상수는 950℃에서 30㎝/min이었고, 이레니우스 상수와 활성화에너지는 각각 1.58×10^(12)㎝/min와 60㎉/㏖이었다. C/SiC composite materials were prepared by depositing silicon carbide from dichlorodimethylsilane(DDS) and hydrogen in the woven fabrics of carbon fibers through chemical vapor infiltration(CVI). Most of DDS decomposed thermally at the temperature above 950℃. The deposition rate increased with the pressure, i.e., the concentration af dichlorodimethylsilane. It also increased wit4 the deposition temperature, however, it decreased after the temperature reached 1000℃ due to side reactions. Silicon carbide deposited uniformly around fibers in the sample and was confirmed as β-type. The first-order deposition rate constant at 950℃ was 30㎝/min and the Arrhenius constant and the activation energy were 1.58×10^(12) ㎝/min and 60 ㎉/㏖, respectively.
용융탄산염 연료전지의 운전변수가 성능에 미치는 영향에 대한 수치모사와 실험치와의 비교
오인환,안영주,홍성안,남석우,임태훈,정귀영,주재백 한국화학공학회 1995 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.33 No.4
용융탄산염 단위연료전지에서 등온가정하에서 운전변수가 성능에 미치는 영향을 모사하기 위한 수학적 모델이 제시되었다 문헌상의 음극저항식 중 아레니우스 상수에 2배를 하여 계산된 총괄저항값은 실험치와 일치하였다. 이 결과를 기초로 하여 전류밀도, 가스이용률(즉 유속), 가스조성, 전지온도가 성능에 미치는 영향에 대한 수치모사와 실험치[1]를 비교 연구하였다. 등온모델에서 운전변수가 전압, 출력 등의 성능에 미치는 영향에 대한 수치모사 결과는 실험치와 잘 일치하였다. A mathematical model is proposed to simulate the effect of variables on cell performances of molten carbonate unit fuel cell at the constant temperature. Values of the total cell resistance calculated with twice of the Arrhenius constant in the equation of anode resistance, presented in the reference, agreed well with experimental data. On the basis of these results, numerical calculations of the effects of current density, the gas utilization(i.e. flow rate), gas compositions, and cell temperature on the cell performances were compared with experimental data[1]. At the constant temperature, numerical calculations of the effects of operating variables on the cell performances, such as voltage and power, were agreed well with experimental data.