http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
A study on automatic adjustment of white-balance for color television by using the fuzzy logic
채석,오영석,이상윤,이지홍,Chae, Seog,Oh, Young-Suk,Lee, Sang-Yun,Lee, Ji-Hong The Institute of Electronics and Information Engin 1993 전자공학회논문지-B Vol.b30 No.6
The white-balance system for color tevision is characterized by 5 input-5 output nonlinear process. A design strategy of fuzzy control rules is treated in which it can be adopted to the white balance adjustment for color television. A fuzzy rule based on an expert's knowledge is constructed, and then a multivariable fuzzy control rule is designed. Since human has just two hands, he can manipulate two variables simutaneously. In case when the process to be controlled has more than three control variables, expert's control rule is much different from the multivariable control rule. A multivariable fuzzy control rule is constructed by utilizing the expert' knowledge and rough relations between input and output variables, and its usefulness is shown by experiments.
무선망과 P2P 통신을 통한 스트리밍 재생방식의 휴대용 멀티미디어 플레이어의 설계
이채석(Chae Suk Lee),김진천(Jin Chun Kim) 한국정보과학회 2007 한국정보과학회 학술발표논문집 Vol.34 No.2D
정보통신 기술의 발전으로 디지털 콘텐츠분야는 협의의 문화산업에서 벗어나 범 산업에 공통되는 요소로써 자리매김하고 있다. 디지털 콘텐츠의 급속한 양적 팽창은 콘텐츠의 저작권 보호 문제와 직접적인 충돌을 야기하고 있다. 특히, 저장된 MP3 음악 파일을 재생하는 MP3 플레이어가 확산되면서 MP3 음악 파일의 무단 복제로 인한 저작권 침해 문제는 매우 심각하다. 본 논문에서는 이러한 문제를 해결하고 유비쿼터스 환경에 적합한 응용 기기로써 실시간 멀티미디어 재생기, SMP(Streaming Multimedia Player)를 설계한다. SMP는 WiBro망을 통해 스트리밍 방식으로 음악을 전송받아 재생하는 휴대용 MP3플레이어로써 저렴한 월정액의 저작권 및 통신요금으로 언제 어디서나 원하는 음악을 서비스 받을 수 있는 유비쿼터스 단말이다. 본 논문에서는 SMP 단말을 설계하고 WiBro 망과 P2P 통신을 이용한 서비스 연결 방식과 콘텐츠 제공 방식을 제안하고 분석한다.
2.4㎓ 다중채널 능동형 RFID시스템을 위한 대용량 태그 데이터 전송 프로토콜의 설계 및 구현
이채석(Chae-Suk Lee),김동현(Dong-Hyun Kim),김종덕(Jong-Doek Kim) 한국정보과학회 2010 정보과학회논문지 : 정보통신 Vol.37 No.3
능동형 RFID가 많은 응용 분야에서 활용되기 위해서 대용량의 태그 데이터를 보다 빠르고 효율적으로 보낼 필요성이 대두되고 있다. ISO/IEC 18000-7 표준은 433㎒대역을 사용하고 있으며 전송 속도는 27.8kbps에 불과하다. 이러한 전송속도는 대용량 데이터를 전송하기에 무리가 있다. 우리는 빠른 대용량 태그 데이터 전송을 위하여 2.4㎓대역을 사용하였고, 보다 효율적인 데이터 전송을 위하여 데이터 전송 프로토콜을 설계하였다. 우리가 설계한 프로토콜은 Burst Read UDB라는 새로운 명령어를 사용하여 255bytes이상의 메시지 데이터를 생성하고, 이를 효과적으로 전송할 수 있도록 이루어져 있다. 프로토콜을 구현하기 위하여 Texas Instruments사에서 개발한 Smart RF04 개발보드를 사용하였으며, 통신모듈로는 CC2500트랜시버를 이용하였다. 구현을 통한 비교실험에서 63.75kbytes의 데이터를 전송할 경우, 기존 표준의 Read UDB보다 Burst Read UDB가 17.95%의 데이터 전송시간이 향상되었음을 확인하였다. To apply active RFID technology in the various kinds of industry, it needs to quickly transmit a large amount of data. ISO/IEC 18000-7 standard uses the 433.92㎒ as single channel system and its transmit rate is just 27.8kbps, that is insufficient for a large amount of data transmission. To solve this problem, we designed a new data transmission protocol using 2.4㎓ band. The feature of designed protocol is not only making over 255bytes data messages using the Burst Read UDB but also efficiently transmitting it. To implement this protocol, we use Texas Instruments’s SmartRF04 develop kit and CC2500 transceiver as RF module. As an evaluation of 63.75kbytes data transmission, we demonstrate that transmission time of Burst Read UDB has improved as 17.95% faster than that of Read UDB in the ISO/IEC 18000-7.
다중인터페이스 다중채널 2.4GHz 능동형 RFID 리더 프로토콜 구현방법에 관한 연구
김동현,이채석,김종덕,Kim, Dong-Hyun,Lee, Chae-Suk,Kim, Jong-Doek 한국정보통신학회 2010 한국정보통신학회논문지 Vol.14 No.4
다중인터페이스, 다중채널 2.4GHz 능동형 RFID시스템에서 리더가 태그들을 수집할 때, 특정 인터페이스로 태그가 집중화되는 문제가 발생한다. 이러한 문제를 해결하기 위해 인터페이스 간 부하 분산 프로토콜인 LP-결합과 AP-균형 프로토콜을 설계하고 시뮬레이션을 통하여 성능의 우수성을 보였다. 설계된 프로토콜들을 펌웨어레벨의 하드웨어에서 구현하기에는 세 가지 문제를 가진다. 첫째, 태그가 랜덤하게 리더의 채널을 선택하고, 리더가 태그의 채널을 변경시킬 수 있는 방법이 필요하다. 둘째, 리더와 태그 간 동기 문제이다. 셋째, 하나의 MCU가 2개의 인터페이스를 동시에 동작시키는 문제이다. 이 같은 문제를 해결하기위해 태그 채널 변경을 위한 메시지 설계 및 태그 채널 변경 방법과 리더와 태그 간 동기를 맞추기 위한 프로토콜을 구현했다. 그리고 실험을 통해 프로토콜의 성능을 비교 분석 하였다. LP윈도우크기가 같을 경우, 부하분산을 통해 충돌 확률을 낮게 하는 LP-결합, AP-균형의 성능이 단일인터페이스보다 우수했다. When reader collect tags, we found that they tend to get together to specific interface in Multi-Interface Multi-Channel 2.4GHz Active RFID system. To solve this problem, we designed the LP-Combind and AP-Balanced protocol for load distribution between interfaces, then verified its superiority of the performance through the simulation. There are three problems to implement designed protocols in hardware of firmware-level. first, tag selects randomly the channel of reader and reader need the method which can change the channel of tags. second, reader has the synchronization problem between reader and tag. third, reader has problem that MCU of reader have to operate simultaneously dual interface. To slove this problems, we designed the message and implemented method for tag channel change and the protocol in order to adjust synchronization between reader and tag, Therefore, we compared and analyzed the performance of protocols by experiment. If LP windows size is same, the performance of LP-Combined protocol and AP-Balanced protocol which lower collision probability by its load distribution is more outstanding than single interface protocol performance.
배한진(Han-Jin Bae),이병헌(Byung-Hun Lee),이채석(Chae-Suk Lee),신칠석(Chil-Seok Shin) 대한기계학회 2013 대한기계학회 춘추학술대회 Vol.2013 No.12
For application of high-performance coating in a new shipbuilding, the abrasive blasting cleaning is widely favored primarily because of its economic and performance benefits. Blasting cleaning productivity is known to be affected by a number of parameters, such as air pressure at the nozzle, air volume, abrasive/air mixing ratio, abrasive type and size, and type of nozzle used, and so on. To achieve the economic benefits from abrasive blasting, proper selection and matching of these parameters are essential. In this study, a quantitative relationship between blastingrelated operation parameters and blasting efficiency is evaluated, and the optimum blasting conditions are sought, which can dramatically improve the blasting productivity as well as effectively meet new IMO’s PSPC surface preparation requirements. The results clearly indicated that the newly optimized blasting condition can remarkably reduce the amount of abrasive used. Adjusting the profile height by careful selection of the primary variables such as abrasive size and nozzle pressure, which are closely related to the surface roughness, is important in meeting the new IMO standard.