http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이은혜(Lee, eun-hye) , 박홍수(Park, hong-su) 조선대학교 조형미술연구소 2012 조형미술논문집 Vol.12 No.2
초상화는 동서양을 막론하고 일찍부터 발달해 온 미술 장르 중의 하나이다. 우리나라의 초상화는 오랜 역사를 지니고 있지만 초상화가 가장 성행하고 발달하였던 때는 조선왕조때라고 말할 수 있다. 조선은 ‘삼강오륜(三鋼五倫)’을 근간으로 삼아 국가 사회질서의 기틀을 유지하였기 때문에 그 이념과 성격을 이해하는데 초상화만큼 도움이 되는 시각예술도 드물 것 국립중앙박물관 『초상화의 비밀』우진비엔피, 2011, p.6 이라 사료된다. 조선의 초상화는 모범이 되는 역사 인물을 대상으로 추모하고 넋을 기리는 제의적이고 교훈적인 성격을 지니기에 주로 왕, 충신, 사대부, 선비 등 한 시대를 풍미한 특정 인물을 그려냈다는게 특징이다. 그 중에서도 그 수효나 예술성에 있어서, 그리고 조선 시대 양반 사회의 성격을 여실히 보여준다는 점에서 사대부 초상화를 단연 주목할 만하다. 이씨 조선 500년 동안 그려진 초상화들은 시기별로 도상과 표현법에서 차이를 보여 시대 양식을 드러낸다. 조선시대 초상화에는 그려진 연대나 작자를 표시하고 있지 않은 것이 많아 시기별 도상과 표현의 변화를 파악하는 것은 초상화의 제작시기를 가늠해 볼 수 있는 방법이 되는데 이 중에서도 초상화에서 가장 중요한 얼굴 부분 표현법의 변화를 짚어 보는 것은 초상화를 이해하고 감상하기 위한 국립중앙박물관 『초상화의 비밀』우진비엔피, 2011, p.200 가장 첫 번째 순차가 될 것이다. 본 연구의 목적은 조선 후기 초상화에서 특정 인물상이 어떻게 전개되었으며, 그 인물의 세부적인 안면 표정을 관상학적 측면으로 대입하여 인물의 내면세계와 사회적 위치에 따른 기품, 생애, 그리고 작가의 표현방식과 기법상 현대미술과 상이하거나 공통된 고유한 특징들을 구체적으로 모색하는데 있다. Keywords : 조선시대 초상화, 초상화 안면 표정 A portrait of Joseon Dynasty period, A face in a portrait
東·西洋 線의 繪畵的 요소에 대한 이미지 硏究 -본인작품 중심으로 -
김여진(Kim, yeo-jin), 박홍수(Park, hong-su) 조선대학교 조형미술연구소 2017 조형미술논문집 Vol.17 No.1
본 논문은 동·서양 선에 회화적 요소의 바탕으로 동·서양화의 선의 개념을 알아보고 역사적 의미와 사상적 배경을 토대로 연구를 한다. 동·서양화의 선에 나타나는 특징을 파악함으로서 한국작가는 오관중과 박래현, 서양작가로 칸디스키, 몬드리안의 회화적 방법과 선(線)의 특징에 대해 고찰하고 연구자의 작품에서 추구하는 선의 특징적 요소에 대한 조형성을 연구한다. 연구자는 선 자체로 작가의 정신성과 다양한 필묵과 이미지형상을 삽입함으로서 감정을 표현하고 전달한다는 것에 의의를 둔다. 작품의 단순한 표현보다 이론적 배경에 우선의 목적을 두고 내면세계를 기본 바탕으로 다양한 선을 이용하여 표현하고자 한다. Keywords : 회화, 선, 이미지, 동양미학. conversation, line, image, Oriental aesthetics
강요상(Kang, yo-sang), 박홍수(park, Hong-su) 조선대학교 조형미술연구소 2012 조형미술논문집 Vol.12 No.2
연구에 앞서 여러 접착제 중 회화에 쓰여진 식물성접착제와 동물성접착제를 중점적으로 파악하고. 다양한 분야에서 사용되고 있는 접착제의 종류 및 역사적 배경에 대해 서술하고 이를 바탕으로 전통회화 작품에 사용되어진 접착제의 사용방법과 종류에 대해 기술하고자 한다. 접착제에 관한 연구는 효용성 만큼 다양한데, 전통회화라는 제한된 영역에서 접착제의 역사와 종류에 식물성 접착제와 동물성 접착제, 열경화성, 열가소성접착제를 파악하고 건축, 생활가전제품 등 시대와 생활에 따른 변화와 연계성에 맞추어 동시대적 비교가 가능한 접착제에 관하여 연구한다. 그리고 한국 전통회화에서 사용하는 아교, 밀가루풀, 단청에서 사용하는 접착제 및 옻의 재료적 특성에 대해 정리하고 현대 미술에서 접착제의 현대적 활용 방안과 제안에 대해 서술하고자 한다. Keywords : 전통회화, 접착제, 현대적 활용방안 traditional painting, glue, modern utilization
고립된 왜소불규칙은하 NGC 1156의 새로운 거리 결정
김상철,박홍수,경재만,이준협,이창희,김민진,Kim, Sang-Cheol,Park, Hong-Su,Gyeong, Jae-Man,Lee, Jun-Hyeop,Lee, Chang-Hui,Kim, Min-Jin 한국천문학회 2012 天文學會報 Vol.37 No.2
홀로 고립되어 존재하는 은하는 주변 은하와 상호작용을 하지 않은 채 진화하므로 은하의 진화를 연구하기에 아주 좋은 대상이다. 은하의 정량적 연구를 위해 꼭 알아야 하는 중요한 물리량으로 거리와 성간소광량이 있다. 우리는 허블 우주망원경(HST) Advanced Camera for Surveys(ACS)/High Resolution Channel(HRC)로 관측한 고립된 왜소불규칙은하 NGC 1156 ($RA_{2000}$=02:59:42.19, $DEC_{2000}$=+25:14:14.2) 중심부($26^{\prime\prime}{\times}29^{\prime\prime}$)의 archive 자료를 분석하여 이 은하의 거리와 성간소광량을 새로 구했다. 이 은하의 거리를 측정한 과거 자료는 Tully(1988, Nearby Galaxies Catalog) 목록과 Special Astrophysical Observatory 6m 망원경/VI(각 300s) 영상자료의 가장 밝은 별로 거리를 구한 Karachentsev et al. (1996) 자료 뿐이다. 우리는 HST/ACS/HRC+UBVI 자료 중 U자료를 이용하여 아주 신뢰할 만한 소광량 값($E(B-V)=0.35{\pm}0.05$)을 얻었고, 가장 밝은 빨간 별과 파란 별 자료를 이용하여 새로운 거리지수($(m-M)_0=29.39{\pm}0.20$, $d=7.6{\pm}0.7$ Mpc)를 결정했다. 이 거리 값은 과거의 값들(Tully $6.4{\pm}1.2$ Mpc; Karachentsev et al. $7.8{\pm}0.5$ Mpc)과 크게 다르지 않으며, 기존의 거리 자료들 역시 신뢰할만함을 보여준다. ACS/Wide Field Channel과 달리 ACS/HRC의 경우 등급 표준화 방정식이 완벽하지 않은데, 우리의 경우 F550M자료를 표준화할 수 없었다. 그러나 우리는 여러 파장, 많은 관측자료가 존재하는 47 Tucanae (NGC 104) 구상성단의 관측자료와 Padova 등연령곡선을 이용하여 성공적인 등급변환을 수행할 수 있었다.
영구유연발수제에 관한 연구(제2보) -1,2-Disubstituted Imidazoline 화합물의 합성-
심정변,박홍수,홍성일,Sim, Jeong-Byeon,Park, Hong-Su,Hong, Seong-Il 한국섬유공학회 1975 한국섬유공학회지 Vol.12 No.3
1,2-Disubstituted imidazoline, such as 1-stearoly aminoethyl-2- heptadecyl imidazoline (SHI), 1-stearoyl dis (aminoethyl)-2- heptadecyl imidazoline(SDI) and 1-stearoyl tris (aminoethyl) -2-heptadecyl imidazoline(STI) were synthesized from stearic acid with polyalkylene polyamine, and then water-soluble 1,2-disubstituted imidazolinium salts, such as 1-stearoyl aminoethyl-1-glycidyl -2-heptadecyl imidazolinium chloride(SHIC), 1-stearoyl dis(aminoethyl)-1-glycidyl-2-heptadecyl imidazolinium chloride(STIC), 1-stearoyl aminoethyl-2-heptadecyl imidazolinium chloride(SAIC) and 1-stearoyl aminoethyl-1-benzyl-2-heptadecyl imidazolinium chloride(SBIC) were obtained by alkylating 1,2-disubstituted imidazoline with epichlorohydrin, hydrochloric acid and benzyl chloride. It was found that SHIC, SDIC and STIC could be used as the durable softening and water-repellenting agent, from the results of the measurements of the water repellency of fabrics treated with SHIC, SDIC, STIC, SAIC and SBIC. The structures of these compounds were also determined by elemental analyses and IR spectra.
김상범 ( Kim Sangbeom ),박은석 ( Park Eun Seog ),천한진 ( Cheon Han Jin ),김영국 ( Kim Yeong Gug ),임연수 ( Im Yeon Su ),박홍수 ( Park Hong Su ),함현식 ( Ham Hyeon Sig ) 한국유화학회 2003 한국응용과학기술학회지 Vol.20 No.4
N/A Synthesis gas is produced commercially by a steam reforming process. However, the process is highly endothermic and energy intensive. Thus, this study was conducted to produce synthesis gas by the partial oxidation of methane to cut down the energy cost. Supported Ni catalysts were prepared by the impregnation method. To examine the activity of the catalysts, a differential fixed bed reactor was used, and the reaction was carried out at 750~850℃ and 1 atm. The fresh and used catalysts were characterized by XRD, XPS, TGA and AAS. The highest catalytic activity was obtained with the 13wt% Ni/MgO catalyst, with which methane conversion was 81%, and H_(2) and CO selectivities were 94% and 93%, respectively. 13wt% Ni/MgO catalyst showed the best MgNiO_(2) solid solution state, which can explain the highest catalytic activity of the 13wt% Ni/MgO catalyst.
김상범 ( Kim Sang Beom ),박은석 ( Park Eun Seog ),천한진 ( Cheon Han Jin ),김영국 ( Kim Yeong Gug ),김명수 ( Kim Myeong Su ),박홍수 ( Park Hong Su ),함현식 ( Ham Hyeon Sig ) 한국유화학회 2003 한국응용과학기술학회지 Vol.20 No.3
N/A Syntheses gas is commercially produced by a steam reforming process. However, the process is highly endothermic and energy-consuming. Thus, this study was conducted to produce syntheses gas by the partial oxidation of methane to decrease the energy cost. Supported Ni catalysts were prepared by the impregnation method. To examine the activity of the catalysts, a differential fixed bed reactor was used, and the reaction was carried out at 750~850℃ and 1 atm. The fresh and used catalysts were characterized by XRD, XPS, TGA and AAS. The highest catalytic activity was obtained with the 13wt% Ni/MgO catalyst, with which methane conversion was 81%, and H_(2) and CO selectivities were 94% and 93%, respectively. 13wt% Ni/MgO catalyst showed the best MgNiO_(2) solid solution state, which can explain the highest catalytic activity of the 13wt% Ni/MgO catalyst.
총설 : 니켈담지촉매에서 합성가스 제조시 La 조촉매의 영향
황재영 ( Hwang Jae Yeong ),김영국 ( Kim Yeong Gug ),임연수 ( Im Yeon Su ),박홍수 ( Park Hong Su ),함현식 ( Ham Hyeon Sig ) 한국유화학회 2004 한국응용과학기술학회지 Vol.21 No.1
N/A The effect of La promoter on the carbon deposition and catalytic activity in the synthesis gas production with supported Ni catalysts was investigated. Active component was Ni and support was CeO_(2) and the promoter used was La. The reaction was carried out in a fixed reactor at 1 atm and 650~800℃. The catalysts were prepared by two methods, the impregnation method and urea method. The catalysts prepared by the urea method showed 10 times higher surface area than those of prepared by the impregnation method. By the introduction of La promoter in the catalyst system, carbon deposition was remarkably reduced from 16% to 2%. It appears that the promoter facilitates the formation of a stable fluoride-type phase, which reduces the carbon deposition. The best atalytic activity and CO and H_(2) selectivities were obtained with 2.5wt% Ni/Ce(La)Ox catalyst at 750℃, giving 90% methane conversion, 93 and 80% of CO and H_(2) selectivities, respectively.