농촌지역 활성화를 위한 도시공원의 활용 - 구례군 백련제 주변 관광자원화사업을 사례로 -

박지환,오창송,Park, Ji-Hwan,Oh, Chang-Song 한국농촌계획학회 2018 농촌계획 Vol.24 No.3

This study is conducted to propose urban park utilization and master plan in rural areas. Urban parks designed for the rural areas can be divided into three types: a themed type for rural tourism, a community type for hub regenerations and a waterfront type for using agricultural reservoirs. To use the themes and characteristics of ruralness, these types are required a multi-layered spatial structure. And ecological, cultural and economic networks of local tourism resources have to be integrated by utilizing agricultural reservoirs. Therefore, urban parks in rural areas can be defined as a part of the public benefit project aiming to revitalize the local economy. Also, urban parks are necessary to use attractions and amenities in rural areas. Based on theoretical backgrounds, this study proposed two sustainable master plans as the tourism resource development project for Baelyeonje, Gulye-gun. For ecological and cultural sustainability, this study proposed the environment restoration plan which reinforces the scenic resource of Nogodan in Mt. Jiri by developing the underdevelopment plan with consideration of the local landscape characteristics and resources. For economic sustainability, building the Mt. Jiri tourism complex and economic communities are needed to promote investments for securing mutual economic benefits. To achieve the sustainability, further studies related to the social equity and investment of private capital in rural areas are needed.

열적외선영상을 이용한 동결된 암석의 파괴특성 연구

박지환,박형동,Park, Jihwan,Park, Hyeong-Dong 한국암반공학회 2015 터널과지하공간 Vol.25 No.2

암석시료에 응력이 가해질 경우 역학적 에너지가 대상 물체에 누적되고, 대상 암석에 한계응력 이상이 가해질 경우 시료의 파괴가 발생한다. 이 때 시료 내부에 저장되어 있던 역학적 에너지는 물리적 변형뿐만 아니라 빛, 열, 소리 등 다양한 형태의 에너지로 발산된다. 본 연구에서는 $-10^{\circ}C$ 저온 환경에서 섬록암, 현무암, 응회암을 대상으로 일축압축강도 시험과 점하중강도 시험을 수행하고, 이때 발생하는 온도 변화를 열적외선카메라를 이용해 측정하고 정량적으로 분석하였다. 파괴 직전 파괴면에 응력이 집중되어 온도가 상승하였고, 파괴 순간 축적된 에너지가 열에너지의 형태로 방출되며 파괴면의 온도가 급격히 상승하는 것이 감지되었다. 강도가 높고 신선한 섬록암과 현무암 시료의 온도 상승폭이 상대적으로 강도가 낮고 풍화된 암석인 응회암 시료의 온도 상승폭에 비해 더 크게 나타났다. 본 연구결과는 저온지역에 위치한 암반사면, 터널, 광산 내부의 응력 집중지점을 감지해 향후 발생 가능한 재해를 예방하는데 적용될 수 있으며, 지진예측을 위한 위성영상 분석에도 적용될 것으로 기대된다. Mechanical energy is accumulated in the object when stress is exerted on rock specimens, and the failure is occurred when the stress is larger than critical stress. The accumulated energy is emitted as various forms including physical deformation, light, heat and sound. Uniaxial compression strength test and point load strength test were carried out in low temperature environment, and thermal variation of rock specimens were observed and analyzed quantitatively using thermal infrared camera images. Temperature of failure plane was increased just before the failure because of concentration of stress, and was rapidly increased at the moment of the failure because of the emission of thermal energy. The variations of temperature were larger in diorite and basalt specimens which were strong and fresh than in tuff specimens which were weak and weathered. This study can be applied to prevent disasters in rock slope, tunnel and mine in cold regions and to analyze satellite image for predicting earthquake in cold regions.

마그넬리상 합성과 광전기화학셀 전극 응용

박지환,양하늘,홍순현,김천중,김도진,Park, Jihwan,Nguyen, Duc Quang,Yang, Haneul,Hong, Soonhyun,Truong, Thi Hien,Kim, Chunjoong,Kim, Dojin 한국재료학회 2018 한국재료학회지 Vol.28 No.5

Hydrothermal synthesis of highly crystalline $TiO_2$ nanorods is a well-developed technique and the nanorods have been widely used as the template for growth of various core-shell nanorod structures. Magneli/CdS core-shell nanorod structures are fabricated for the photoelectrochemical cell (PEC) electrode to achieve enhanced carrier transport along the metallic magneli phase nanorod template. However, the long and thin $TiO_2$ nanorods may form a high resistance path to the electrons transferred from the CdS layer. $TiO_2$ nanorods synthesized are reduced to magneli phases, $TixO_{2x-1}$, by heat treatment in a hydrogen environment. Two types of magneli phase nanorods of $Ti_4O_7$ and $Ti_3O_5$ are synthesized. Structural morphology and X-ray diffraction analyses are carried out. CdS nano-films are deposited on the magneli nanorods for the main light absorption layer to form a photoanode, and the PEC performance is measured under simulated sunlight irradiation and compared with the conventional $TiO_2/CdS$ core-shell nanorod electrode. A higher photocurrent is observed from the stand-alone $Ti_3O_5/CdS$ core-shell nanorod structure in which the nanorods are grown on both sides of the seed layer.

스폰지 티타늄의 수소화 거동

박지환,이동원,김종렬,Park, Ji-Hwan,Lee, Dong-Won,Kim, Jong-Ryoul 한국분말야금학회 2010 한국분말재료학회지 (KPMI) Vol.17 No.5

Titanium powders have been usually produced by de-hydrogenating treatment in vacuum with titanium hydride ($TiH_2$) powders prepared by milling of hydrogenated sponge titanium, $TiH_x$. The higher stoichiometry of x in $TiH_x$, whose maximum value is 2, is achieved, crushing behavior is easier. $TiH_x$ powder can be, therefore, easy to manufactured leading to obtain higher recovery factor of it. In addition, contamination of the powder can also minimized by the decrease of milling time. In this study, the hydrogenation behavior of sponge titanium was studied to find the maximum stoichiometry. The maximum stoichiometry in hydride formation of sponge titanium could be obtained at $750^{\circ}C$ for 2 hrs leading to the formation of $TiH_{{\sim}1.99}$ and the treating temperatures lower or higher than $750^{\circ}C$ caused the poor stoichiometries by the low hydrogen diffusivity and un-stability of $TiH_x$, respectively. Such experimental behavior was compared with thermodynamically calculated one. The hydrogenated $TiH_{1.99}$ sponge was fully ball-milled under -325 Mesh and the purity of pure titanium powders obtained by de-hydrogenation was about 99.6%.

Hot pressing으로 제조된 Cu-W계 소결재의 미세조직 및 내마모특성

박지환,김수방,박윤우,Park, Ji-Hwan,Kim, Su-Bang,Park, Yun-U 한국재료학회 2000 한국재료학회지 Vol.10 No.3

Cu-20wt.%W 복합재료를 $800^{\circ}C$에서 $1000^{\circ}C$의 소결온도에서 15MPa과 30MPa의 소결압력으로 30분과 60분 동안 유지하여 진공가압소결하였다. 진공가압소결로 제조한 결과 일반적인 소결공정에 비해 높은 밀도와 경도값의 상승 및 내마모성이 향상되었다. 그런데, 15MPa의 소결압력에서 Cu-W의 미세조직은 W이 부분적으로 불균일하게 군집한 것을 관찰할 수 있다. 이러한 결과는 구리와 텅스텐간의 상호 불고용성과 소결시 소결압력의 차이의 의한 효과라 생각된다. Cu-W composites containing 20wt.% W were fabricated by hot pressing. Hot pressing was carried out at temperatures ranging from 800 to $1000^{\circ}C$ under pressures of 15MPa for 30MPa for 30min and 60min. This process gave composites of higher density, higher hardness and higher wear resistance than the conventional sintering processes. However, the microstructure of Cu-W composites under pressure of 15MPa revealed there was an inhomogeneous distribution of W, segregation of W on some area. These undesirable results are attributed to the immiscibility of W in Cu and the pressure effect on sintering.

연부조직 병변의 회복단계별 정형 물리치료적 적용원리

박지환,Park, Ji-Whan 대한물리치료과학회 1994 대한물리치료과학회지 Vol.1 No.2

This article provids background information necessary to design orthopaedic physical therapy programs based on a patient's level of orthopaedic involvement during the acute, subacute, or chronic stage of soft-tissue healing. This approach was used whether the problem involved injury from trauma, insult from overuse, disease, surgical intervention. Soft-tissue lesions and clinical conditions were defined ; the stages of inflammation and repair were described with emphasis on how to manage soft tissues and joints with therapeutic exercise during each stage. A problem list with goals and plan of care was outlined to summarize each clinical situation. A list of clinical problems will be used as the foundation for designing exercise problems for each region of the body.

국내 물리치료사의 현황분석과 그 효율적 활용방안

박지환,정낙수,송영화,Park, Ji-Whan,Chung, Nack-Su,Song, Young-Wha 대한물리치료사협회 1989 대한물리치료사협회지 Vol.10 No.2

슬개대퇴골 증후군과 장경근막 증후군에 있어서 장경인대의 기능에 대한 새로운 문제점

박지환,Park, Ji-Whan 대한물리치료과학회 1996 대한물리치료과학회지 Vol.3 No.3

Until the up to day, we have known that a tight iliotibial tract has an influence on the patella, pulling it laterally and causing pain in patients with patellofemoral syndrome, so should be stretched as a part of physical therapy. But the iliotibial tract's function on the patella in subjects with PFS has not yet been proved and further questions need to be answered regarding the evlauation or treatment of a tight tract in patients with PFS.

가압소결에 의해 제조된 FeAl계 금속간 화합물의 플라즈마 질화에 의한 미세조직 및 표면경화

박지환,박윤우,Park, Ji-Hwan,Park, Yun-U 한국재료학회 1999 한국재료학회지 Vol.9 No.11

FeAl 기지 복합재료는 hot-pressing에 의해서 성공적으로 제조할 수 있다. 이러한 FeAl 합금의 기계적 특성에 대한 연구는 많이 진행되었으나 플라즈마 질화에 의한 표면 경화특성에 관한 연구는 아직 미흡한 실정이다. 본 연구에서는 hot-pressing으로 제조된 소결 복합재료의 미세구조와 플라즈마 질화처리시 표면경화의 관계를 분석하였다. FeAl을 기지로 하는 합금은 플라즈마 질화처리에 의해서 표면경도가 상승하는 경향을 보였고, 이러한 경향은 질화처리 시간이 증가할수록 더욱 뚜렷하였다($\textrm{H}_{\textrm{v}}$ 100gf, 확산층 : 1100~1450kg/$\textrm{mm}^2$, matrix : 330~360kg/$\textrm{mm}^2$). FeAl 합금으로 플라즈마 질화처리에 의해서 매우 우수한 표면경화특성을 얻을 수 있었다. 확산층은 플라즈마 질화처리시간이 증가할수록 두꺼워졌으며, SiC(sub)p의 함유량이 증가함에 따라 확산층은 감소하였다. FeAl matrix composite was fabricated successfully by hot-pressing. The mechanical properties of FeAl alloys have been widely studies, but their behaviors of surface hardening effect by plasma nitriding has not yet been studied. This study was to analysis the relationship between microstructure of the sintered composite by hot-pressing and surface hardening at plasma nitriding treatment. Surface hardening of FeAl base alloys was improved by plasma nitriding with increasing plasma treatment time. Excellent surface hardness in the FeAl alloys could be obtained by plasma nitriding($\textrm{H}_{\textrm{v}}$ 100gf, diffusion layer: 1100~1450kg/$\textrm{mm}^2$, matrix : 330~360kg/$\textrm{mm}^2$). Diffusion layer size increased with increasing plasma nitriding times and decreased with increasing Sic, content.

요추 추간판 수핵 탈출증에 대한 편측 견인의 치료효과

박지환,권혁수,Park, Ji-Whan,Kwon, Hyeok-Su 대한물리치료과학회 1995 대한물리치료과학회지 Vol.2 No.2

Markolf and Morris suggests that the deranged disk and torn annulus have an exellent recovery ability from the position of spine extension, where the posterior annulus is not under stress and the gel can move anterioly. McKenzie explains side gliding as a combination of rotation and side bending, his clinical studies indicate that side-gliding can gel laterally. In conclusion, the prone unilateral traction on the opposite side from the patient's pain along with the other treatment appered to have helped reduce those patient's pain. The method of treatment described in this report is suggested for Korean physical therapists who treat patients suspected of posterolateral herniated nucleus pulposus.