http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박연수,최동호,강대흥,오정태,오백만 한국강구조학회 2002 韓國鋼構造學會 論文集 Vol.14 No.5
본 연구는 강한 반복하중하에서 강부재가 파괴에 이르는 손상과정을 규명하고 , 손상과 관련된 인자들을 이용하여 손상지수를 제시하며, 이와 관련된 해석 기법을 개발하는 것을 목적으로 한다 . 제안된 손상평가 방법은 변형이 가장 심하게 집중된 단면에 있어서 국소 변형율의 이력에 초점을 맞추어 유도되었다 . 해석모델은 좌굴변형의 발생 방향을 가정한 켄틸레버형 강상자형 부재이다 . 파괴에 이르는 중심 압축하중과 일정 압축하중이 가해진 상태에서 반복 제어변위가 작용하는 강부재에 대해 비선형해석을 실시하였다 . 본 해석에 적용된 주요 변수는 하중 재하패턴, 강종이다. 각 변수가 파괴모드, 변형능력, 그리고 손상과정에 미치는 영향을 기술하였고 , 각각 강종에 따른 파괴 과정을 비교하였다. 그 결과 강한 반복하중하에서의 강부재의 파괴는 국부좌굴에 의해서 결정되고 특히 파괴와 직접적으로 연관성이 있는 국 소 소성변형율과 관련되어 있음을 알 수 있었다 . paper aimed to investigate the damage process of steel parts experiencing failure under strong repeatedloading. Likewise, a damage index using various factors related to the damage was proposed. An analysis method for evaluating the damage state was also developed. The damage assessment method focused on the local strain history at the cross-section of the heaviest concentration of deformation. Cantilever-type steel parts were analyzed under uniaxial load combined with a constant axial load, considering horizontal displacement history. Loading patterns and steel types were considered as the main parameters in analyzing the models. The effects of the parameters on the failure modes, deformation capacity, and damage process as seen from the analysis results were also discussed. Each failure proces was compared as steel types. In addition, the failure of steel parts under strong repeated loading was determined according to loading. Results revealed that the state of the failure is closely related to the local plastic strain.
박연수,최선민,양원열,홍혜진,김운형,Park, Yeon Soo,Choi, Sun Min,Yang, Won Yeol,Hong, Hye Jin,Kim, Woon Hyung 한국강구조학회 2008 韓國鋼構造學會 論文集 Vol.20 No.5
국가경제력 향상과 함께 바다와 섬에 대한 관심이 높아지면서 육지와 섬, 섬과 섬을 연결하는 해상 장대교량이 많이 건설되고 있다. 장대교량은 현수교, 사장교, 아치교, 트러스교 등으로 대변할 수 있는데 그 중에서도 사장교는 주탑(Pylon)과 케이블(Cable), 보강형(Stiffened Girder)이 조화를 이루면서 외관이 아름다워 매력적인 교량형식의 하나로 최근 많이 계획되고 있다. 장력측정은 케이블에 설치한 가속도 센서로부터 케이블의 고유진동수 변화를 이용하는 간접법인 진동법을 적용하였다. 본 연구에서는 댐퍼 설치 케이블의 유효길이 산정식을 제안하였는데 이는 케이블의 유효길이 변화를 실측치와 해석값을 비교하여 분석한 것으로 기존의 유효길이 산정방법인 댐퍼와 정착단간의 순간격에 의한 것은 최종 케이블 장력값 추정에 있어서 신뢰도가 떨어짐을 확인할 수 있었다. 그러므로 향후 유지관리 단계에서는 본 연구에서 제안한 케이블의 유효길이 산정식을 활용하여 장력을 정확하게 파악하는 것이 케이블의 재긴장 및 교체시기 결정 등에도 합리적인 의사결정 자료로 사용될 수 있을 것이다. Recently, many ocean bridges that connect land to island or island to island have been constructed along with the improvement of the nation's economy. Long-span bridges can be categorized as suspension bridge, cable-stayed bridge, arch bridge and truss bridge. In this study, correction with respect to construction error can be presented on site through the monitoring of the cable tension change of real structure for four major construction stages so that construction accuracy, including the management of profiles, can be improved. A vibration method, the so-called indirect method that uses the cable's natural frequency changes from the acceleration sensor installed on the cable, is applied in measuring cable tension. In this study, the estimation formula for the effective length of cable with damper is presented by comparing and analyzing between actual measurement and analysis result for the change of the cable's effective length. By the way, it is known that the reliability of estimating cable tension by applying the former method that uses the net distance from damper to anchorage is low. Therefore, for future reference of the maintenance stage, the presented formula for estimating the effective length of cable can be used as a reference for the rational decision-making, such as the re-tensioning and replacement of cable.