고상법에 의한 100 nm BaTiO₃ 분말의 합성

김정환,정한승,조준엽,홍정오,김영태,허강헌,Kim, Jung-Hwan,Jung, Han-Seong,Cho, Joon-Yeob,Hong, Jeong-Oh,Kim, Young-Tae,Hur, Kang-Heon 한국세라믹학회 2009 한국세라믹학회지 Vol.46 No.2

$BaTiO_3$ powder was synthesized by the solid-state reaction of fine $BaTiO_3$ and $TiO_2$ raw materials. Fine grinding media of 50 and 300 microns were used for obtaining fine particulate mixture of $BaTiO_3$ and $TiO_2$ with high homogeneity. Effect of the size of grinding media on the synthesis mechanism of $BaTiO_3$ was discussed on the basis of the particulate morphology and thermogravimetry data for the mixture powders. By using the finer grinding media, $BaTiO_3$ was formed at the lower temperature and the particle size with the relatively narrower distribution could be obtained. $BaTiO_3$ powder with the average size of 100 nm was synthesized by the solid reaction in vacuum atmosphere.

노인 복지를 위한 응급 상황 호출 프로그램의 개발 및 구현

김정환,조면균,김식,Kim, Jung-Hwan,Cho, Myeon-Gyun,Kim, Shik 대한임베디드공학회 2013 대한임베디드공학회논문지 Vol.8 No.2

This paper proposes a system that utilizes USN(Ubiquitous Sensor Network), Bluetooth and smart phone to improve the function of senior houses. In typical approach, a system in a senior house either directly accesses the status of elderly people by its sensor or is alerted by elderly people who trigger an emergency bell, derive a decision and take an appropriate action. In addition, it is possible for a designated social worker to check the status of senior patients through monitoring system connected by UTP(Unshielded Uwisted Pair) cables, but the responsible person has to be present to monitor patients' status. However, the new system, suggested in this paper, embed Bluetooth function in a blood pressure gauge, thus the smart phone receives patients' health information such as blood pressure through Bluebooth, if any abnormal event occurs. Consequently, the smart phone sends SMS(Short Message Service) to a responsible social worker or a designated hospital. When this program in the paper becomes a reality, an unmanned system that is able to determine suitable actions for certain events will be established, even if a social worker were absence.

PLD를 이용한 강유전체(PZT, PST, PT)/YBCO 박막 구조의 제작과 전기적인 특성에 관한 연구

김정환,이재형,문병무,Kim, Jung-Hwan,Lee, Jae-Hyung,Moon, Byung-Moo 한국전기전자재료학회 1998 전기전자재료학회논문지 Vol.11 No.7

(PZT, PST, PT)/ YBCO structured have been grown on single crystal $LaAlO_3$ using in-situ Nb:YAG pulsed laser deposition technique. The optimum conditions of fabrication for high quality films have been established under various oxygen pressure. TBCO was used as a metallic electrode for polarizing ferroelectric thin fillms. Lattice mismatch of these materials were found to be with in 3%. As a result XRD patterns and rocking curves, (PZT, PST, PT)/ YBCO multiayered thin films on $LaAlO_3$ substrates showed preferred orientation to c-axis. For invastigation on electrical properties of ferroelectric thin films, remanent polaiztion $P_r$ and coercive field $E_c$ were measured for three samples. At each optimum condition, they showed the values of P_r=60 \mu C/cm^2 and E_c=240kV/ cm for PT, 30\mu C/cm^2 and 105kV/cm for PZT, 1.5\mu C/cm^2$ and 15kV/cm for PST. Frequency dependence of dielectric properties of ferroelectric thin fillms was also investigated. As a result, it showed the frequency dependence was relatively small in the range of 10Hz~10kHz.

새로운 2-(4-phenyl)Quinazolylacetonitrile 유도체들의 합성

김정환,남상욱,Jung-Hwan Kim,Sang-Uook Nam 대한화학회 2003 대한화학회지 Vol.47 No.4

새로운 1-Cyanomethylphthalazine 유도체들의 합성

김정환,김종오,Kim, Jung-Hwan,Kim, Jong-oh 대한화학회 2000 대한화학회지 Vol.44 No.3

한글 문자 입력 인터페이스 개발을 위한 눈-손 Coordination에 대한 연구

김정환,홍승권,명노해,Kim, Jung-Hwan,Hong, Seung-Kweon,Myung, Ro-Hae 대한인간공학회 2007 大韓人間工學會誌 Vol.26 No.2

Recently, various devices requiring text input such as mobile phone IPTV, PDA and UMPC are emerging. The frequency of text entry for them is also increasing. This study was focused on the evaluation of Korean text entry interface. Various models to evaluate text entry interfaces have been proposed. Most of models were based on human cognitive process for text input. The cognitive process was divided into two components; visual scanning process and finger movement process. The time spent for visual scanning process was modeled as Hick-Hyman law, while the time for finger movement was determined as Fitts' law. There are three questions on the model-based evaluation of text entry interface. Firstly, are human cognitive processes (visual scanning and finger movement) during the entry of text sequentially occurring as the models. Secondly, is it possible to predict real text input time by previous models. Thirdly, does the human cognitive process for text input vary according to users' text entry speed. There was time gap between the real measured text input time and predicted time. The time gap was larger in the case of participants with high speed to enter text. The reason was found out investigating Eye-Hand Coordination during text input process. Differently from an assumption that visual scan on the keyboard is followed by a finger movement, the experienced group performed both visual scanning and finger movement simultaneously. Arrival Lead Time was investigated to measure the extent of time overlapping between two processes. 'Arrival Lead Time' is the interval between the eye fixation on the target button and the button click. In addition to the arrival lead time, it was revealed that the experienced group uses the less number of fixations during text entry than the novice group. This result will contribute to the improvement of evaluation model for text entry interface.

원형 쉬프트 통신의 중첩 효과 분석

김정환,노정규,송하윤,Kim, Jung-Hwan,Rho, Jung-Kyu,Song, Ha-Yoon 한국정보처리학회 2002 정보처리학회논문지 A Vol.9 No.2

통신과 계산 작업을 중첩 수행함으로써 통신 시간의 감춤 효과를 얻는 것은 일반적인 병렬 프로그램 최적화 방법 중의 하나이다. 본 논문에서는 데이타 병렬 프로그램에서 자주 사용되는 군집 통신(collective communication)의 하나인 원형 쉬프트(circular shift) 통신에 대해 중첩 효과를 실험하고 고찰하였다. 이더넷 스위치로 연결된 클러스터 시스템에서 원형 쉬프트 통신을 수행할 때, 중첩으로 얻을 수 있는 최대 이득과 중첩할 수 없는 시간을 측정하였다. 각 플랫폼 별로 이러한 측정값들을 얻어 퇴적화 컴파일러의 입력으로 활용할 수 있을 것이다. 한편 기존의 성능 모델을 통해 퇴적화하는 것은 크게 두가지 문제를 갖고 있다. 하나는 기본적인 점대점 통신에 입각한 모델을 제공하기 때문에 통신 라이브러리의 함수를 사용할 때의 종합적인 효과, 특히, 군집 통신과 같은 경우에는 적용하기 어렵다는 것이다. 다른 하나는 군집 통신의 성능은 분석은 가능하지만, 중첩 효과는 분석할 수 없다는 것이다. 본 논문에서는 이러한 기존 모델의 단점을 보완하여 확장하였다. 또한, 원형 쉬프트 통신에 대한 실험 결과를 토대로 확장된 모델의 매개 변수 값들을 추출하여 예제 프로그램을 통해 분석하였다. Many researchers have been interested in the optimization of parallel programs through the latency hiding by overlapping the communication with the computation. We ana1yzed overlapping effects in the circular shift communication which is one of the collective communications being frequently used In many data parallel programs. We measured the time which can be possibly overlapped and the time which cannot be overlapped in over all circular shift communication period on an Ethernet switch-based clustered system. The result from each platform nay be used for the input of optimizing compilers. The previous performance models usually have two kinds of drawbacks one is only based on point-to-point communication, so it is not appropriate for analyzing the overall effects of collective communications. The other provides the performance of collective communication, but no overlapping effect. In this paper we extended the previous models and analyzed the experimental results of the extended model.

전역 이기종 환경에서의 정적 태스크 스케줄링의 비교 연구

김정환,Kim Jung-Hwan 한국정보처리학회 2006 정보처리학회논문지 A Vol.13 No.2

DAG(Directed Acyclic Graph) 기반의 스케줄링을 포함한 많은 스케줄링 문제들은 대부분 NP-Complete로 알려져 있으며, 따라서 휴리스틱에 기반한 많은 알고리즘 연구들이 진행되어 왔다. 이 중 HEFT와 CPOP은 이기종 환경에서 효과적인 알고리즘으로 알려져 있다. 본 논문의 이전 연구에서는 이기종 환경이 보다 현실성 있는 전역 네트워크로 구성된 경우에 대해 효과적인 3개의 알고리즘(CPOC, eCPOC, eCPOP)을 제안한 바 있다. 본 논문에서는 이들 총 5개의 알고리즘에서 사용하는 휴리스틱을 체계적으로 분석하고, 다양한 벤치마크를 사용한 실험을 통해 비교 분석하였다. 실험 결과 전역 이기종 환경에서 eCPOC이 가장 우수한 성능을 보여주었고, 또한 제안된 3개의 알고리즘에서 사용하는 휴리스틱들이 전역 이기종 환경에서 효과적임이 확인되었다. Most scheduling problems including DAG(Directed Acyclic Graph)-based are known to be NP-complete, so many heuristic-based scheduling algorithms have been researched. HEFT and CPOP are such algorithms which have been devised to be effective in heterogeneous environment. We proposed, in the previous research, three scheduling algorithms which are effective in realistic global heterogeneous environment: CPOC, eCPOPC and eCPOP. In this paper, the heuristics which are used in the above five algorithms will be systematically analyzed. Those algorithms will be also studied experimentally using various benchmarks. Experimental results show that the eCPOC generates better schedules than any other algorithms and the heuristics which are used in the proposed algorithms are effective in the global heterogeneous environment.

새로운 BF₂-Chelate 화합물들의 합성

김정환,김영은,Kim, Jung-Hwan,Kim, Yeung-Eun 대한화학회 2004 대한화학회지 Vol.48 No.4

$BF_2$-chelate 형태의 4-pyrimidylideneacetonitrile 유도체들은 4-pyrimidylideneacetonitrile 유도체들의 H-chelate 화합물들과 boron trifluoride diethyl etherate를 반응시켜 얻을 수 있었다. 또 이들 H-chelate 화합물들은 2-cyanomethylpyridine 유도체들에 여러가지 친전자체들 즉 4,6-dichloropyrimidine, 4,6-dichloro-2-methylpyrimidine, 4,6-dichloro-2-heptadecylpyrimidine, 4,6-dichloro-2-phenylpyrimidine, 4,6-dichloro-5-phenylpyrimidine 그리고 4,6-dichloro-2,5-diphenylpyrimidine을 친전자성 치환반응시켜 만들었다. 화합물에 대한 구조는 분광학적인 방법으로 분석하였다. 4-pyrimidylideneacetonitrile derivatives containing $BF_2$-chelate have been synthesized from H-chelates of 4-pyrimidylideneacetonitrile derivatives and boron trifluoride diethyl etherate. These H-chelates were prepared by the electrophilic substitution of 2-cyanomethylpyridine derivatives with electrophiles such as 4,6-dichloropyrimidine, 4,6-dichloro-2-methylpyrimidine, 4,6-dichloro-2-heptadecylpyrimidine, 4,6-dichloro-2-phenylpyrimidine, 4,6-dichloro-5-phenylpyrimidine and 4,6-dichloro-2,5-diphenylpyrimidine. Structures of the target molecules were identified by spectra methods.

50μm급 이트리아 안정화 지르코니아 비드의 미세구조 및 마모 조건에 따른 마모율 분석

김정환,윤세중,한병동,안철우,윤운하,최종진,Kim, Jung-Hwan,Yoon, Sae-Jung,Hahn, Byung-Dong,Ahn, Cheol-Woo,Yoon, Woon-Ha,Choi, Jong-Jin 한국재료학회 2019 한국재료학회지 Vol.29 No.4

This study analyzes the mechanical properties, including the attrition rate, of $50{\mu}m$ size yttria-stabilized zirconia (YSZ) beads with different microstructures and high-energy milling conditions. The yttria distribution in the grain and grain-boundary of the fully sintered beads relates closely to Vickers hardness and the attrition rate of the YSZ beads. Grain size, fractured surfaces, and yttrium distribution are analyzed by electronic microscopes. For standardization and a reliable comparison of the attrition rate of zirconia beads with different conditions, Zr content in milled ceramic powder is analyzed and calculated by X-ray Fluorescence Spectrometer(XRF) instead of directly measuring the weight change of milled YSZ beads. The beads with small grain sizes sintered at lower temperature exhibit a higher Vickers hardness and lower attrition rate. The attrition rate of $50{\mu}m$ YSZ beads is measured and compared with the various materials properties of ceramic powders used for high-energy milling. The attrition rate of beads appears to be closely related to the Vickers hardness of ceramic materials used for milling, and demonstrates more than a 10 times higher attrition rate with Alumina(Hv ~1650) powder than $BaTiO_3$ powder (Hv ~315).