http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
강태경(Tae Kyoung Kang),서남원(Nam Won Seo),김도형(Do Hyung Kim),안은모(Un Mo Ahn),여태홍(Tae Hong Yeo),김준홍(Jun Hong Kim),안선의(Sune Ie Ahn),김동휘(Dong Hwi Kim),박은동(Un Dong Park) 대한산부인과학회 2001 Obstetrics & Gynecology Science Vol.44 No.3
N/A Objective: The human MAGE 3 gene encodes tumor specific antigens that are recognized by autologue cytotoxic T lymphocytes (CTL). The MAGE 3 gene is expressed not only in melanoma but in the other malignant tumors as well. There is, however, little information on the expression of the gene in uterine cervical carcinomas. The author thus studied the expression of the MAGE 3 gene products in uterine cervical carcinoma and discuss the possibility of specific immunologic diagnosis using MAGE 3 gene products. Methods: The expression of MAGE 3 gene product in 17 normal tissues of the cervix, 32 cervical intraepithelial neoplasia (8 CINⅠ, 10 CINⅡ, 14 CIS), and 43 invasive cervical carcinomas was studied by immunohistochemistry using anti-MAGE 3 mAb 57B in paraffin sections. Results: No expression of MAGE 3 gene product was detected in normal cervical tissues and in cervical intraepithelial neoplasias. The expression of MAGE 3 gene product was detected in 30.2% (13/43) of invasive cervical carcinomas. The MAGE 3 gene product was stained as a cytoplasmic protein in cancer cells. No statistically significant differences were observed between MAGE 3 gene product expression status and clinicopathologic parameters. Conclusions: The MAGE 3 gene products was expressed in invasive cervical carcinoma tissues.
원통형 종이포트 고추 묘의 생육 차이가 초기 뿌리 생육과 수량에 미치는 영향
서태철(Tae Cheol Seo),안세웅(Se Woong An),김선민(Sun Min Kim),남춘우(Chun Woo Nam),전희(Hee Chun),김영철(Young Chul Kim),강태경(Tae Kyoung, Kang),김성우(Sung Woo, Kim),전수경(Su Gyeong Jeon),장길수(Kil-Su Jang) (사)한국생물환경조절학회 2017 생물환경조절학회지 Vol.26 No.4
본 연구는 최근에 도입된 원통형 종이포트 묘에 대한 현장 활용가능성을 검토하고자 기존의 프러그 묘를 대조구로 하여 몇가지 육묘조건에 따른 묘의 생육 차이를 분석하고, 정식 후 수량을 비교하였다. 전주 유리온실에서 수행된 육묘 실험에서는 묘의 생육은 프러그 트레이 50공에서 지속 시비한 처리에서 생육량이 가장 많았다. 생육은 육묘 상자의 구멍에 채우는 상토량에 따라 영향을 받으며, 육묘 상자 보다는 시비 처리에 따른 차이가 더 컸다. 공시한 ‘청양’, ‘대권선언’, ‘롱그린맛’ 품종 모두 같은 양상을 보였다. 육묘 후 비닐하우스와 노지에 심어서 뿌리 발달과 수량을 조사한 결과, 비닐하우스 재배 시 ‘청양’ 품종의 뿌리 내림은 종이포트묘와 프러그묘 간에 차이가 없었으며, 공시한 3 품종 모두 최종 누적수량의 차이는 없었다. 전주 지역 노지재배에서는 ‘청양’은 종이포트묘가, ‘대권선언’과 ‘롱그린맛’은 프러그묘가 누적수량이 많았다. 영양 지역에서 ‘대권선언’ 품종은 종이포트묘와 프러그묘 간에 수량 차이는 없었다. 결론적으로 육묘 처리 조건에 따른 원통형 종이포트 고추묘의 생육의 변화는 기존의 프러그묘와 같은 양상이며, 정식 후 재배조건과 품종에 따른 미미한 차이는 있었으나 전반적으로 수량차이는 없는 것으로 나타나 앞으로 원통형 종이포트 고추 묘에 대한 활용가능성은 높을 것으로 판단되었다. This study investigated the possibility of application of the recently introduced cylindrical paper pot seedlings in hot pepper (Capsicum annuum L.) cultivation. The seedling growth, initial rooting after planting and accumulated fruit yield were investigated with the treatments of tray type (paper pot and plug) as a main factor, tray cell number (40 cell and 50 cell) as a sub-factor, and fertigation method (continuous fertigation and fertigation after 35 days sowing) as a sub-sub factor, respectively. The growth of pepper seedlings was significantly affected by tray type and fertigation method showing the highest value at 50 cell plug tray with continuous fertigation, and the effect of fertigation was greater than that of trays. ‘Cheongyang’, ‘Daekwonseoneon’ and ‘Longgreenmat’ cultivar showed all the same pattern in seedling growth. These three-cultivar seedlings were planted in plastic house and in open field in Jeonju area, respectively, and another ‘Daekwonseoneon’ seedlings raised Yeongyang local area was also planted at the same area. There was no difference in the rooting of ‘Cheongyang" pepper at 2 weeks after planting in plastic house. The accumulated fruit weight was not significantly different between paper pot seedlings and plug seedlings in three cultivar grown in plastic house. However, that of ‘Cheongyang’ pepper showed higher at paper pot seedlings than plug seedlings and the other two cultivar were higher at plug seedlings in open field. ‘Daekwonseoneon’ pepper yield grown in open field in ‘Yeongyang’ area was not significant between paper pot seedlings and plug seedlings. In conclusion, the pattern of seedlings growth grown in the cylindrical paper pot was the same as those of the conventional plug seedlings and also fruit yield was similar between paper pot seedlings and plug seedlings even though minute difference among cultivars. These results suggest that pepper seedlings grown in paper pot should be highly applicable to pepper cultivation.
50 kW급 과수원용 트랙터 3점 히치 유압 동력 전달 장치 개발
강나래 ( Na-rae Kang ),김용주 ( Yong-joo Kim ),최문찬 ( Moon-chan Choi ),이규호 ( Kyu-hoo Lee ),정선옥 ( Sun-ok Chung ),하종규 ( Jong-kyou Ha ),강태경 ( Tae-kyoung Kang ),김영근 ( Young-keun Kim ) 한국농업기계학회 2016 한국농업기계학회 학술발표논문집 Vol.21 No.2
국내의 트랙터와 트랙터 주요 요소에 관한 연구는 엔진, 변속기 및 외장기술에서 많은 발전을 이루었다. 그러나 작업기 제어 시스템에 대한 개발은 미국, 호주, 영국, 일본 등 기술 선진국에 비해 발전 속도가 늦은 실정이다. 본 연구에서는 선진국의 기종과 경쟁할 수 있는 50 kW 급 과수원용 트랙터 개발을 위한핵심요소인 3점 히치 유압 동력 전달부를 개발하고, 그 성능을 평가하는 것을 목적으로 하였다. 유압시스템은 과수원용 트랙터의 방제, 제초 및 운반 작업에 적합한 유압회로를 설계하였고, 유압 양력의 목표치는 선진사 모델을 조사 분석하여 20.6 kN으로 설정하였다. 유압 승강 실린더는 트랜스미션 외부에 장착되는 외장형으로 설계하였고, 3점 히치 유압 양력 계산을 하기 위해서 유압양력 계산 프로그램을 Visual Basic 프로그램으로 사용하였다. 성능 시험을위해 하부 히치점에 웨이트를 적재할 수 있는 적재대를 부착하여, 웨이트를 적재하여 측정하는 방법을 사용하였다. 하부 히치의 최하단점에서 최상단점까지 작동하면서 최대 무게를 측정하였으며, 유압 양력 테스트를 위하여 트랙터 리프트암 센서값과 리프트암의 지면 기준 높이를 캘리브레이션하였다. 설계 시 3점 히치부의 위치를 먼저 결정을 한 후에 리프트 실린더의 용량을 결정하였다. 히치 양력 계산값은 최하사점인 초기에 유양 양력이 높게 나오다가 최상사점 가까이에 도달하면 유압 양력이 떨어지는 것으로 나타났다. 리프트 실린더의 로드경을 60 mm와 65 mm의 2가지 변수로 유압 양력을 계산하였다. 그 결과, 실린더 로드 직경 5 mm 차이가 유압 양력에서 2.9 - 3.9 kN정도 나타났다. 계산상 나타나는 최소 유압양력 18.6 - 31.4 kN으로 최고 상사점을 제외하면 실제 사용하는 구간에서의 유압 양력이 설계 시 설정한 값인 20.6 kN보다 높게 나타났다.
저온특성을 향상시키기 위한 리튬이온 배터리 분리막 설계
유성구(Yoo Sung-Goo),강태경(Kang Tae-Kyoung),설남오(Seul Nam-O) 대한전자공학회 2019 전자공학회논문지 Vol.56 No.7
리튬 이온 배터리는 일반적으로 저온에서 수명과 출력이 저하된다. 배터리 셀의 구조상 다양한 인자가 온도에 따라 영향을 받는다. 본 연구에서는 배터리 내부에서 발생하는 쇼트 현상을 제어하는 분리막이 낮은 온도에 따라 어떤 특성을 나타내는지를 분석하였다. 분리막의 기공도와 투습율 그리고 두께가 다른 배터리 셀을 제작하였고, 이를 -20℃에서 20℃까지 변화시키면서 배터리의 수명과 출력 특성을 측정하였다. 실험결과 기공도와 투습율이 낮고 두께가 얇을수록 저온에서 강인한 특성을 보였다. 분리막 통기도는 150/CCS를 유지하고, 두께는 14㎛가 최적의 성능을 보였다. 본 연구를 통해 온도 특성에 강인한 배터리 설계를 위한 분리막 최적 형태를 도출하였다. Lithium ion batteries generally have low life and low power at low temperatures. Due to the structure of the battery cell, various factors are influenced by the temperature. In this study, the characteristics of the separator controlling the short - circuit phenomenon occurring in the battery according to the low temperature are analyzed. Battery life and power characteristics of the battery were measured while varying the porosity, ventilation and thickness of the separator from -20°C to 20°C. The experimental results show that the lower the ventilation and the thinner the thickness, the stronger the property at low temperatures. The separator showed optimal performance when the ventilation is maintained at 150/ccs and the thickness is 14㎛. Through this study, we derive the optimum separator type for battery design that is resistant to temperature characteristics.
웨브 개구부를 갖는 철골 보-기둥 접합부의 내진 성능에 관한 연구
박종원,강승민,황인규,강태경,권기주,Park, Jong Won,Kang, Seoung Min,Hwang, In Kyu,Kang, Tae Kyoung,Kwon, Ki Ju 한국강구조학회 2001 韓國鋼構造學會 論文集 Vol.13 No.4
보-기둥 접합부의 내진성능을 향상시키기 위해 소성힌지의 발생위치를 보의 내부로 유도한 철골 모멘트 접합부에 대해 실험연구를 수행하였다. 이를 위해 보의 단면을 감소시키는 방안으로는 dogbone 접합부에서 처럼 플랜지를 감소시키는 대신에 웨브에 개구부를 설치하였다. 본 연구에서는 개구부의 형상 및 크기를 변수로 하여 총 4개의 실제 크기의 시험체에 대해 반복하중 실험을 수행하였다. 4개 시험체 모두 기둥은 $H-458{\times}417{\times}30{\times}50$, 보는 $H-792{\times}300{\times}14{\times}22$를 사용하였다. 실험결과 웨브 개구부를 이용한 접합부는 강진지역에서 철골 모멘트 연성골조에 요구되는 0.04 rad.의 총회전각을 발휘할 수 있는 것으로 나타났다. A test program was conducted on seismic-resistant steel moment connections constructed using Reduced Beam Sections with beam web openings. In the connection, in order to enhance ductility capacity under severe cyclic loads, a portion of the beam web near the beam-to-column connection is cut out instead of the beam flange as in dogbone connections. A total of 4 large scale specimens were tested in this program. The specimens were all made using $H-458{\times}417{\times}30{\times}50$ sections for the columns and $H-792{\times}300{\times}14{\times}22$ sections for the beams. Test specimens showed excellent performance similar to that of dogbone connections.