연관색인법(聯關索引法)의 이론(理論)과 실제(實際)

김태수,Kim, Tae Soo 한국정보관리학회 1984 정보관리학회지 Vol.1 No.1

정보(情報)의 축적(蓄積)과 검색(檢索)을 위한 개념(槪念) 조직과정(組織過程)에서는 개념(槪念) 뿐만 아니라 이들 개념간(槪念間)의 상관관계(相關關係)가 명확히 표현되어야 하며 이를 위해서는 인간(人間)의 사고과정(思考科程)에 기초해야 한다. 연관색인법(聯關索引法)에서는 9개의 연관기호(聯關記號)를 통하여 문신 중에서 각 개념간의 관계표현이 가능하며 이들 개념을 순열(順列)시키므로써 주제색인(主題索引)으로서의 기능을 수행할 수 있으며 기존의 색인(索引)시스템에 비해 검색효율의 개선(改善)을 초래할 수 있을 것이다. The intellectual organization of information for storage and retrieval is one of the problem areas of information science. But the most of the methods have been developed are based on the coordination of keywords by Boolean logic or traditional classification systems. It is necessary to include in indexing process not just concepts or keywords, but also to express explicitly the relationship between them. Farradane believed that such a system should be founded on the psychology of thinking and developed an outline structure for concept organization and a series of explicit relations. The system of relational operators provides nine symbols which enable the semantic relationship between any two concepts to be explicitly specified in a analet. With the addition of the permutations of such analets, formed according to simple rules, alphabetical arrangement of the first term provides a complete logical subject index. Relational indexing as the basis of an indexing language has the potential to offer improved retrieval performance.

웨이브릿 임계치 잡음제거에 의한 파형의 변곡점 검출

김태수,Kim, Tae-Soo 한국정보통신학회 2009 한국정보통신학회논문지 Vol.13 No.10

본 논문에서 제안하는 잡음제거 방법은 hard 임계치 방법의 문제점을 개선한 제로점의 탄젠트 곡선 보간에 의한 잡음제거 기술이다. 자연계에서 관측되는 대기 전기변동량과 같은 신호의 시간적 변동량이나 가상현실을 이용하여 추출한사람의 빠른 움직임의 동작 곡선 등은 실제로 복잡하다. 따라서 이러한 신호의 관측파형에 대하여 변곡점에 대한 특징을 정확히 결정하는 것이 매우 중요하다. 특히 자연계의 측정 신호는 잡음이 포함되어 있어서 잡음을 제거하고 특징을 추출하는 것이 필요하다. 본 논문에서 제안한 새로운 방식에 의하여 잡음을 제거하고 변곡점을 추출하며 종래의 방식인 hard 임계치에 비하여 잡음지수가 5인 경우의 noise II 변곡점 신호에 대하여 SNR이 3.4dB 개선된 결과를 얻을 수 있음을 보였다. In this paper, the proposed method is a denoising technology by tangent curve interpolation of zero points. The problem of the hard threshold method is improved by the proposed method. The quantity of time fluctuation of the electromagnetic signal as the quantity of electric fluctuation of the natural world or the curve of motion waveform of the fast movement of human extracted using virtual reality is, in fact, complex. Therefore it is important to decide exactly the signal properties as the inflection point for observation signal. In particular, it is necessary to extract the properties after denoising, since the measurement signal of the natural world include some noises. It shows that the noise of the inflection point signal with noise II, noise factor 5, is eliminated by the proposed method, and the result of SNR for the signal is improved 3.4dB than that by the conventional hard threshold.

무선 RF 및 비젼을 이용한 위치인식시스템 연구

김태수,Kim, Tae-Soo 한국정보통신학회 2011 한국정보통신학회논문지 Vol.15 No.8

본 연구에서 제안하는 위치인식시스템은 전파의 위상 및 크기를 이용하여 거리를 구하고 여기서 구한 거리 정보를 보다 정확하게 측정하기 위해서 비젼에 의한 영상 히스토그램 기법을 이용하여 보완하는 기술이다. 제안하는 기술은 거리측정용 무선송수신기로부터 송수신된 900Mhz대 RF 신호로부터 중간주파수인 450Khz의 아날로그 데이터를 디지털신호처리를 통하여 얻어내며, 여기서 얻어진 거리 정보에다 비젼에 의해 얻어진 거리를 상호 보완하여 보다 정확한 거리 정보를 획득한다. 측정된 거리의 평가를 위해서 실제거리와 측정된 거리를 비교 분석하고, 또한 평균처리 및 진폭특성을 통한 측정오차 개선 방법과 기존의 RF 신호만 이용하는 경우와 비교 검토한다. In this research, the location positioning system supposed is concerned with range recognition technology using phase and magnitude of radio wave and adding technology of image histogram by vision. By the proposed technology, we design the radio transmitter and receiver and realize the measurement system, and save the data in disk that is earned from 900Mhz RF signal, middle frequency 450Khz of analog signal. Range information is earned the data through digital signal processing of IF signal. For the estimation of range measured, we analyze the difference between real range and measurement range, and also suggest the method to improve the measurement error using average processing and amplitude properties.

독일목록규칙의 기본기입선정에 관한 연구

김태수,Kim Tae-soo 한국문헌정보학회 1991 한국문헌정보학회지 Vol.21 No.-

This study reviews the development and change of main entry principle in German cataloging codes, with special emphasis on RAK. With rerard to the functions of catalog, comparison between the traditional title main entry in the Orient and author main entry in the West has been made. The analysis confirms in this study that various criteria in choice of the entries in RAK have been adopted. In case of works where the persons who have played different roles in the works are named on the title page, as well as related works and works of mixed responsibility, the criteria of entry determination are complex and time consuming process and have no absolute value. And there are also various kinds of problems in corporate entries including confirmation of originator(Urheber), choice of either the territorial authority corncerned or corporate bodies as an entry depending on the nature of the publications, and a unique bibliographical situation of treaties. This means the code is absence of absolute value in selecting entries, and this results in adoption of main entry principle which has lost its significance for the purpose of cataloging. With emergence of the ISBD and actualization of automated cataloging, morever, all entries are equal as points of access. It would eliminate the need for personal judgements required in choice of main entry by the present code. In doing so, it would bring uniformity and standardization to cataloging practice. In direct approach to works, title entry is more developed finding device than author entry in cataloging theories. Thus introduction of unit card system beginning with title which is adopted in KCR3 would be desirable, the complicated rules for the choice of entry could be abandoned from cataloging codes. Most of the user studies show that catalog users have placed higher value on the title entry as a finding device and each entry is equal as access points through unit entry. This means that choice of a given entry as a main entry is unnecessary in cataloging codes. Title entry would be a rather simple standard and direct approach for works. This study proves that the traditional title entry of Korea is superior to author main entry in the Western world in cataloging theory. Thus recommendation to be made is that abandonment of author main entry from cataloging codes should be considered in the future.

크레인의 이동거리 측정을 위한 무선 송수신기 설계 및 평가

김태수,오인열,전중창,Kim, Tae-Soo,Oh, Inn-Yeal,Chun, Joong-Chang 한국정보통신학회 2007 한국정보통신학회논문지 Vol.11 No.4

본 논문에서 제안하는 크레인의 이동거리 측정시스템은 전파의 위상 및 크기를 이용하여 거리를 인식하는 기술이다. 제안하는 기술은 거리측정용 무선송수신기를 설계하고, 측정시스템을 구현하며, 송수신된 900Mhz대 RF 신호로부터 중간주파수인 450Khz의 아날로그 데이터를 디스크에 저장한다. RF 측정결과 9.3 dBm의 출력과 96dBc@10khz의 위상 잡음특성을 얻었고 얻어진 RF 신호에 대한 450Khz 데이터를 디지털신호처리를 통하여 거리정보를 얻는 것이다. 측정된 거리의 평가를 위해서 실제거리와 측정된 거리를 비교분석하고, 또한 평균처리 및 진폭특성을 통한 측정오차 제거 방법을 제시하였다. 최종거리 측정 결과 Ref. 신호에 비하여 10m-30m 거리에 대하여 0.12, 그리고 5m 이내의 근거리 실험에서 위상오차가 0.00422이었으나, 진폭특성을 보완하여 4m에서 2.4E-04의 오차를 얻을 수 있었다. In this paper, the measurement system of crane moving range is concerned with range recognition technology using phase and magnitude of radio wave. By the proposed technology, we design the radio transmitter and receiver and realize the measurement system, and save the data in disk that is earned from 900Mhz RF signal, middle frequency 450khz of analog signal. As a result of RF measurement, we got 9.3 dBm of RF output and 96 dBc@10khz of phase noise. Range information is earned the data through digital signal processing of IF signal. For the estimation of range measured, we analyze the difference between real range and measurement range, and also suggest the method to remove the measurement error using average processing and amplitude properties. A result is 0.12 and 0.00422 deviation in l0mn-30m and within 5m respectively, and then 2.4E-04 deviation in 4m by using compensation of level characteristics lately.

사상방과 양약의 병용투여가 간장, 신장에 미치는 영향

김태수,김창연,민지연,최영규,강대희,Kim, Tae-Soo,Kim, Chang-Yeon,Min, Ji-Yeun,Choi, Young-Gue,Kang, Dae-Hee 사상체질의학회 2004 사상체질의학회지 Vol.16 No.3

1. Objectives The Purpose of this study was to evaluate whether use of Sasang -Bang with western medication may injury the liver and the kidney function. We clinically studied the change Liver function test and BUN/Cr in patients who were hospitalized in Hana oriental Medical center for more than 1 month. 2. Methods The subjects were 33 patients admitted in Hana Oriental Medical center. All patients had been checked Liver Function Test and BUN/Cr three times every 2 weeks. 3. Results Aspartate Aminotransferase(AST), Alanine Aminotransferase(ALT), Gamma-Glutamyl transferase(GGT), Total billirubin, BUN, Creatine didn't change, compared with previous 2 weeks and 4 weeks. 4. Conclusions This study suggests that even though there are few toxic Sasang-Bang, in general, herbal medications with western medications which are prescribed by oriental medicine doctors should be carefully administered not to hurt liver and kidney function.

페라이트계 스테인리스강 용접접합부의 모재 블록전단파단에 관한 실험적 연구

김태수,Kim, Tae Soo 한국강구조학회 2016 韓國鋼構造學會 論文集 Vol.28 No.5

최근에 스테인리스강의 우수한 연성과 내식성 등의 재료적 특성으로 건축물의 구조용 강재로 적용하기 위한 많은 연구들이 수행되어 오고 있다. 특히, 니켈을 거의 함유하고 있지 않은 페라이트계 스테인리스강은 재료비 측면에서 니켈을 함유하고 있는 오스테나이트계 스테인리스강에 비해 저렴하고 탄소강에 비해서는 월등한 내식성능과 구조성능을 제공하기 때문에 그 사용성이 증대되고 있다. 본 연구에서는 페라이트계 스테인리스강 용접접합부에 있어 용착금속이 아닌 모재 블록전단파단의 구조적 거동을 조사하기 위해 용접길이와 용접방법(아크, 티그)을 변수로 하여 단순인장 실험을 실시하였다. 용접접합부의 블록전단 거동은 용접에 의한 삼축응력효과 때문에 볼트접합부의 블록전단 거동과 상이하며, 현행설계기준식은 이러한 특성을 반영하지 못하고 있다. 티그용접 접합부의 변형능력과 최대내력이 아크용접 접합부보다 높게 나타났고, 현행기준식과 기존연구자에 의해 제시된 내력식에 의한 예측내력과 실험결과 최대내력을 비교 검토하였다. Many researches on the application of stainless steels as structural steels have been performed thanks to their material properties such as superior ductility and corrosion resistance. Ferritic stainless steels(STS430) with little or no nickel have been used increasingly in building structure because it is inexpensive compared to austenitic stainless steels(STS304) with nickel, but provide performances similar to the austenitic stainless steel. This paper deals with block shear fracture behavior of base metal in stainless steel welded connection. Although the block shear fracture behavior for welded connection due to stress triaxiality is different from that of bolted connection, the block shear strength of welded connection in current design specifications has been predicted based on that of bolted connection. The main parameters are weld length and welding process(Arc and TIG welds). The ultimate strengths of TIG welded specimens were higher than those of arc welded specimens and current design predictions by AISC, EC3 etc. were compared with test strengths.

측두하악 증후군에 대한 침치료 군과 추나치료 군의 임상적 고찰

김태수,김창연,이기하,엄태웅,정영훈,고영탁,Kim, Tae-Soo,Kim, Chang-Yun,Lee, Ki-Ha,Um, Tae-Woong,Jung, Yung-Hoon,Kho, Yung-Tak 척추신경추나의학회 2006 척추신경추나의학회지 Vol.1 No.1

Objectives : The purpose of study was to compare and analyze the effects of the distance Acupuncture and the Chuna on Temporomandibular Disorder. Methods : Clinical studies were done on 31 patients who were treated with Temporomandibular Disorder at Dept. of Acupuncture & Moxibusition of Hospital of Ha-na Oriental Medicine from May 23 2005 to Apr 30 2006. Subjects were divided Into two group, Distance acupuncture group and Chuna group. In Distance acupuncture group, we treated patients with Wijungyug(胃正格) or Damjungyug(膽正格). In Chuna group, we treated patients with Distraction & Translation technique. For evaluating Function of Temporomandibular joint of Patients, we use the Modified Craniomandibular Index(mCMI) before treatment and after 6th treatment. Results : In Mandibular Movement(MM) of patients, the patients of Acupuncture Group were more effective than Chuna group. In TMJ noise(TN) of patients, the patients of Chuna Group were more effective than Acupuncture group. Conclusions : The Distance acupuncture may be better effect on Mandibular Movement and The chuna maybe better effect on TMJ noise.

건축구조용 고성능강(HSA800) 용접 H형단면 기둥의 압축강도에 관한 연구

김태수,이명재,오영석,이강민,김도환,Kim, Tae Soo,Lee, Myung Jae,Oh, Young Suk,Lee, Kang Min,Kim, Do Hwan 한국강구조학회 2012 韓國鋼構造學會 論文集 Vol.24 No.6

최근 구조물의 고층화, 대형화 및 장스팬 활용 등의 요구로 고강도 고성능 재료의 건축물과 교량에의 적용이 증가하는 추세이다. 본 논문은 고성능강의 건축구조용 재료 특성과 고성능강재를 사용한 부재의 설계 기준을 위한 기본적인 연구의 일부이다; HSA800의 재료적 특성은 한국산업표준의 요건과 비교하였다. 용접 H-형 단주의 국부좌굴 거동과 현행 판폭두께비 설계 제한치를 검토 위하여 다양한 판폭두께비 변수를 계획하고, 단축압축실험을 실시하였다. 또한, 유한요소결과로 얻어낸 단주의 좌굴거동을 실험결과와 비교하였고 해석결과가 고성능강 H형 단면 단주의 좌굴거동을 잘 예측하는 것으로 나타났다. Recently, high performance(strength) steels have been utilized to structural materials in buildings and bridges with the demand for high-rise and long-span of main structures. This paper is a series of basic study for the design specification of structural members using high performance steel, material properties of high performance rolled steel building structures; material properties of HSA800 steel was compared with the requirements of Korean Standards(KS) for HSA800. Welded H-shape stub columns with variables of width-to-thickness ratios are planned in order to investigate the local buckling behaviors and check the current design limit of width-to-thickness ratio and uniaxial compressive tests are carried out. In addition, the buckling behaviors of stub columns obtained finite element analysis were compared with those of test results.

페라이트계 스테인리스강(STS430) 이면전단 볼트접합부의 구조거동에 관한 실험적 연구

김태수,김민성,Kim, Tae Soo,Kim, Min Seong 한국강구조학회 2013 韓國鋼構造學會 論文集 Vol.25 No.5

일면전단 오스테나이트계 스테인리스강 및 탄소강에 관한 많은 실험 및 해석적 연구가 수행되어졌고, 수정된 내력평가식이 제안되었다. 본 연구에서는 볼트배열(2행 1열, 2행 2열)과 하중방향 연단거리를 주요변수로 하여 이면전단 볼트접합부 실험체가 제작되었고, 단순인장실험이 실시되었다. 고정변수로는 하중직각방향 연단거리, 볼트직경, 피치, 게이지를 설정하였다. 최대내력과 파단형태와 같은 실험결과와 현행기준식에 의한 예측결과와 비교 검토되었다. 볼트배열에 따른 블록전단내력평가식이 제안되었다. Many experimental and numerical researches for thin-walled carbon steel and austenitic stainless steel single shear bolted connections have been conducted and the modified design equations of ultimate strength were proposed. In this study, the tests of double shear bolted connections with bolt arrangements ($2{\times}1$, $2{\times}2$) and end distance parallel to the loading direction as main variables were performed. Specimens were planed with a constant dimension of edge distance perpendicular to the loading direction, bolt diameter, pitch and gauge like single shear bolted connections. The test results such as ultimate strength and fracture mode were compared with those of current design standards. Furthermore, modified block shear equations for double shear bolted connections were suggested.