제1형 Trichorhinophalangeal 증후군

손효성,오창근,김문범,이재봉,장호선,권경술 대한피부과학회 2003 대한피부과학회지 Vol.41 No.6

Trichorhinophalangeal syndrome(TRPS) typeⅠis characterized by sparse and slow-growing hairs, pear-shaped nose, elongated philtrum, thin upper lip, and bone deformities, especially, cone-shaped epiphyses of the phalanges. The syndrome is inherited in an autosomal dominant manner. We report a case of TRPS typeⅠ with alopecia like male pattern baldness and Perthes-like changes on the right hip joint. (Korean J Dermatol 2003;41(6) : 801~804)

CFT용 초고강도 콘크리트를 이용한 실물대 실험

손영준,송인명,양동일,정근호,정상진,최문식 대한건축학회 2004 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.24 No.1(구조계)

The column for Steel Framed Reinforced Concrete Structure (SFRCS) and the column for Reinforced Concrete Structure (RCS) could be the most common building structure. The increasing of the need for massive space hasaffected the size of building components for supporting the massive structure. However, the changing of components size makes inefficient space of building. Hence, to meet the need for acquiring efficient space comparing the budget and cost the new structure method, Concrete Filled Tube Steel (CFT), was developed. CFT is the structure for which steel tube instead of other materials such as wood for holding concrete is used. The most benefit of this one is to help in reducing the size of the building components and local buckling because of tube steel holding concrete. For this reason, this research will examine the probability of applying CFT on construction sites by using the concrete (800kg/cm2) especially for CFT through the data from the real size mock-up.

광조사 강도가 복합레진의 중합반응속도에 미치는 영향에 관한 실시간 체적측정법을 이용한 연구

라성호,이인복,김창근,조병훈,이광원,손호현 大韓齒科保存學會 2002 Restorative Dentistry & Endodontics Vol.27 No.2

Objectives The aim of this study is to evaluate the effect of light intensity variation on the polymerization rate of composite resin using IB system (the experimental equipment designed by DR. IB Lee) by which real-time volumetric change of composite can be measured. Methods Three commercial composite resins [Z100(Z!), AeliteFil(AF), SureFil(SF)] were photopolymerized with Variable Intensity Polymerizer unit (Bisco, U.S.A.) under the variable light intensity (75/150/225/300/375/450mW^2) during 20 sec. Polymerization shrinkage of samples was detected continuously by IB system during 110 sec and the rate of polymerization shrinkage was obtained by its shrinkage data. Peak time(P.T.) showing the maximum rate of polymerization shrinkage was used to compare the polymerization rate. Results Peak time decreased with increasing light intensity(p<0.05). Maximum rate of polymerization shrinkage increased with increasing light intensity(p<0.05). Statistical analysis revealed a significant positive correlation between peak time and inverse square root of the light intensity (AF:R=0.965, Z1:R=0.974, SF:R=0.927). Statistical analysis revealed a significant negative correlation between the maximum rate of polymerization shrinkage and peak time(AF:R=-0.933, Z1:R=-0.892, SF:R=-0.883), and a significant positive correlation between the maximum rate of polymerization shrinkage and square root of the light intensity(AF:R=0.988, Z1:R=0.974, SF:R=0.946). Discussion and Conclusions The polymerization rate of composite resins used in this study was proportional to the square root of light intensity. Maximum rate of polymerization shrinkage as well as peak time can be used to compare the polymerization rate. Real-time volume method using IB system can be a simple, alternative method to obtain the polymerization rate of composite resins.

상아질 접착제의 중합 시간 조절에 따른 복합레진의 중합 수축 방향의 변화

배지현,오명환,김창근,손호현,엄정문,조병훈,권혁춘 대한치과보존학회 2001 Restorative Dentistry & Endodontics Vol.26 No.4

The purpose of this study was to evaluate the effect of adhesive curing timing on the direction of polymerization shrinkage of light-curing composite resin. In this study, the curing times of adhesive and composite resin were measured by differential scanning calorimeter(DSC). 28 extracted human molars were embedded in clear resin and box-type cavities were prepared. Based on DSC data. the experimental teeth were divided into 4 groups. Group 1: no bond: Group 2: late curing: Group 3: Intermediate curing: Group 4: Early curing. After treating with adhesive, the buccal cavities were filled with Z-100 hybrid composite resin and the lingual ones were filled with AEliteflo flowable composite resin. The depressions at the surface were measured by surface profilometer, then the specimens were embedded in clear resin and sectioned. Impressions were obtained and used to get epoxy resin replicas. The epoxy replicas were gold-coated and observed under SEM. Average Maximum Gap(AMG), Gap Proportion(GP), Average Marginal Index(AMI) were used to compare the shrinkage gap of each group. The results were statistically analyzed using the Kruskal-Wallis One Way ANOVA, Student-Newman-Keuls method. The results of this study were as follows. 1. Average Maximum Gap. Gap Proportion, Average Marginal Index and depression at the surface of Z-100 hybride composite resin were smailer than those of AEliteflo flowable composite resin(P(0.05) 2. When the bonding between composite resin and tooth structure was strong, the shrinkage gap was small, and depression at the surface was deep(P<0.05). 3. In the well-bonded group. light-curing composite resin shrank toward bonded cavity wall. not toward light source. The result suggested that the direction of polumerization shrinkage was affected by the quality of bonding in the dentin-resin interface. The strong was the bonding between composite resin and tooth structure, the smaller was the gap and the deeper was the depression at the surface. Then the flow to compensate the polymerization shrinkage proceeded from surface to bonded cavity wall.

연세대학교 치과병원에 내원한 어린이에서의 영구치 맹출 시기 및 순서

강태성,최병재,권호근,손홍규,최형준 大韓小兒齒科學會 2005 大韓小兒齒科學會誌 Vol.32 No.4

치아의 정확한 맹출 시기와 그 순서는 어린이의 발육 성숙도의 지표로서 소아치과 임상 및 예방 교정치료에 있어서 매우 중요하다. 이에 2001~2003년에 연세대학교 치과대학병원 소아치과에 내원한 어린이중 만 5세부터 만 14세까지의 남자 654명, 여자 542명, 총 1,196명의 자료를 수집하여 영구치의 맹출 시기 및 순서에 대한 연구 결과 다음과 같은 결론을 얻었다. 1. 상악 영구치의 맹출 시기는 중절치 남 만6.81세, 여 만6.78세, 측절치 남 만8.30세, 여 만7.98세, 견치 남 만10.28세, 여 만10.04세, 제1소구치 남 만9.74세, 여 만9.90세, 제2소구치 남 만10.87세, 여 만10.41세, 제1대구치 남 만6.25세, 여 만6.54세, 제2대구치 남 만12.21세, 여 만12.03세, 여 만12.03세였다. 2. 하악 영구치의 맹출 시기는 중절치 남 만6.00세, 여 만6.06세, 측절치 남 만6.99세, 여 만6.74세, 견치 남 만9.83세, 여 만9.17세, 제1소구치 남 만9.92세, 여 만9.75세, 제2소구치 남 만10.66세, 여 만10.39세, 제1대구치 남 만5.99세, 여 만5.75세, 제2대구치 남 만11.92세, 여 만12.17세였다. 3. 영구치의 맹출 순서는 상악에서 제1대구치, 중절치, 측절치, 제1소구치, 견치, 제2소구치, 제2대구치의 순이었고, 하악에서 제1대구치, 중절치, 측절치, 견치, 제1소구치, 제2소구치, 제2대구치의 순이었다. Accurate timing and sequence of eruption of permanent teeth are indicies of growth and essential for pediatric dentistry and pediatric clinical orthodontics. From the children brought to the Yonsei Dental Hospital during 2001 to 2003, 654 boys and 542 girls, ranging in age from five to fourteen years, were selected and analysed. The following was concluded. 1. Eruption time of maxillary teeth is 6.81 years in boys, 6.78 years in girls for central incisor, 8.30 years in boys, 7.98 years in girls for lateral incisor, 10.28 years in boys, 10.04years in girls for canine, 9.74 years in boys, 9.90 years in girls for first premolar, 10.87 years in boys, 10.41 years in girls for second premolar, 6.25 years in boys, 6.54 years in girls for first permanent molar, 12.21 years in boys, 12.03 years in girls for second permanent molar. 2. Eruption time of mandibular teeth is 6.00 years in boys, 6.06 years in girls for central incisor, 6.99 years in boys, 6.74 years in girls for lateral incisor, 9.83 years in boys, 9.17 years in girls for canine, 9.92 years in boys, 9.75 years in girls for first premolar, 10.66 years in boys, 10.39 years in girls for second premolar, 5.99 years in boys, 5.75 years in girls for first permanent molar, 11.92 years in boys, 12.17 years in girls for second permanent molar. 3. The following eruption sequence was observed: the first permanent molar erupted first, followed by the central incisor, the lateral incisor, the first premolar, the canine, the second premolar and the second permanent molar in the maxilla. The first permanent molar erupted first, followed by the central incisor, the lateral incisor, the canine, the first premolar, the second premolar and the second permanent molar in the mandible.

THE EFFECT OF PRIMING ETCHED DENTIN WITH SOLVENT ON THE MICROTENSILE BOND STRENGTH OF HYDROPHOBIC DENTIN ADHESIVE

박은숙,배지현,김종순,김재훈,이인복,김창근,손호현,조병훈 대한치과보존학회 2009 Restorative Dentistry & Endodontics Vol.34 No.1

장기적인 상아질 접착의 내구성 악화는 접착층과 혼성층의 친수성 부위에서의 가수분해에 의해 일어나는 것으로 보고 되고 있다. 본 연구의 가설은 콜라겐 망상체를 유기용매로 프라이밍하면 콜라겐 조직을 붕괴시키지 않고 수분을 밀어내고 소수성 단량체와 유기용매로 이루어진 접착제가 침투하여 접착강도를 얻을 수 있다는 것이다. 두 소수성 단량체인 Bisphenol-A-glycidylmethacrylate (Bis-GMA)와 triethyleneglycol dimethacrylate (TEGDMA)를 아세톤, 에탄올 또는 메탄올에 용해시켜 세 가지의 실험용 접착제를 준비하였다. 산 부식과 수세과정 후에, 접착제를 습윤 상아질 표면(습윤 접착)이나 동일한 용매로 프라이밍 된 상아질 표면(용매 프라이밍 접착)에 적용하였다. 48시간 후와 1개월 후, 및 10.000회의 열순환 후에 미세인장결합강도를 측정하였다 접착계면은 주사전자현미경을 이용하여 관찰하였다. 접착방법에 무관하게 대부분의 시편의 접착계면예서 잘 발달된 혼성층을 관찰할 수 있었고 가장 높은 평균 미세인장결합강도는 에탄올을 포함하는 접착제의 48시간 후 시편에서 관찰되었다. 용매를 이용하여 프라이밍하는 접착 방법에서는 에탄올이나 메탄올을 포함하는 접착제에서 열순환 후에 미세인장접착강도가 증가하는 경향을 보였다. 그러나 습윤 접착의 경우에는 시효처리 후 미세인장결합강도의 증가가 관찰되지 않았다. 본 연구에서 에탄올을 이용한 상아질 프라이밍으로 우수한 접착력을 얻을 수 있었고. 열순환 후 접착력이 더욱 증가하였다 Deterioration of long-term dentin adhesion durability is thought to occur by hydrolytic degradation within hydrophilic domains of the adhesive and hybrid layers. This study investigated the hypothesis that priming the collagen network with an organic solvent displacc water without collapse and thereby obtain good bond strength with an adhesive made of hydrophobic monomers and organic solvents. Three experimentaladhesives were prepared by dissolving two hydrophobic monomers bisphenol-A-glycidylmethacrylate (Bis-GMA) and triethyleneglycol dimethacrylate (TEGDMA), into acetone, ethanol or methanol. After an entching and rinsing procedure, the adhesives were applied onto either wet dentin surfaces (wet bonding) or dentin .surfaces primed with the same solvent (solvent-primed bonding). Microtensile bond strength (MTBS) was measured at 48 hrs, 1 month and after 10,000 times of thermocycles. The bonded interfaces were evaluated using a scanning electron microscope (SEM) Regardless of bonding protocols, weIl-developed hybrid layers were observed at the bonded interface in most specimens. The highest mean MTBS was observed in the adhesive containing ethanol at 48 hrs. With solvent-primed bonding increased MTBS tendencies were seen with thermocycling in the adhesives containing ethanol or methanol. However in the case of wet bonding, no increase in MTBS was observed with aging.

Naturally Occurring Biflavonoid, Ochanflavone, Inhibits Cyclooxygenases-2 and 5-Lipoxygenase in Mouse Bone Marrow-derived Mast Cells

Son Min-Jung,Moon Tae-Chul,Lee Eun-Kyung,Son Kun-Ho,Kim Hyun-Pyo,Kang Sam-Sik,Son Jong-Keun,Lee Seung-Ho,Chang Hyeun-Wook The Pharmaceutical Society of Korea 2006 Archives of Pharmacal Research Vol.29 No.4

Ochnaflavone is a medicinal herbal product isolated from Lonicera japonica that inhibits cyclooxygenase-2 (COX-2) dependent phases of prostaglandin $D_2(PGD_2)$ generation in bone marrow-derived mast cells (BMMC) in a concentration-dependent manner with $IC_{50}$ values of $0.6{\mu}M$. Western blotting probed with specific anti-COX-2 antibodies showed that the decrease in quantity of the $PGD_2$ product was accompanied by a decrease in the COX-2 protein level. In addition, this compound consistently inhibited the production of leukotriene $C_4 (LTC_4)$ in a dose dependent manner, with an $IC_{50}$ value of $6.56 {\mu}M$. These results demonstrate that ochnaflavone has a dual cyclooxygenase-2/5-lipoxygenase inhibitory activity. Furthermore, this compound strongly inhibited degranulation reaction in a dose dependent manner, with an $IC_{50}$ value of $3.01{\mu}M$. Therefore, this compound might provide a basis for novel anti-inflammatory drugs.

Ginkgetin, a Biflavone from <i>Ginko biloba</i> Leaves, Inhibits Cyclooxygenases-2 and 5-Lipoxygenase in Mouse Bone Marrow-Derived Mast Cells

Son, Jong Keun,Son, Min Jung,Lee, Eunkyung,Moon, Tae Chul,Son, Kun Ho,Kim, Cheorl-Ho,Kim, Hyun Pyo,Kang, Sam Sik,Chang, Hyeun Wook Pharmaceutical Society of Japan 2005 BIOLOGICAL & PHARMACEUTICAL BULLETIN Vol.28 No.12

<P>Ginkgetin, a biflavone from <I>Ginkgo biloba</I> leaves, was previously reported to be a phospholipase A<SUB>2</SUB> inhibitor and this compound showed the potent antiarthritic activity in rat adjuvant-induced arthritis as well as analgesic activity. This investigation was carried out to find effects on cyclooxygenase-2 (COX-2) <I>in vitro</I> effect. Ginkgetin inhibits COX-2 dependent phases of prostaglandin D<SUB>2</SUB> (PGD<SUB>2</SUB>) generation in bone marrow-derived mast cells (BMMC) in a concentration-dependent manner with IC<SUB>50</SUB> values of 0.75 μ<SMALL>M</SMALL>. Western blotting probed with specific anti-COX-2 antibodies showed that the decrease in quantity of the PGD<SUB>2</SUB> product was accompanied by a decrease in the COX-2 protein level. In addition, this compound consistently inhibited the production of leukotriene C<SUB>4</SUB> (LTC<SUB>4</SUB>) in a dose dependent manner, with an IC<SUB>50</SUB> value of 0.33 μ<SMALL>M</SMALL>. These results demonstrate that ginkgetin has a dual cyclooxygenase-2/5-lipoxygenase inhibitory activity. Furthermore, this compound also inhibited degranulation reaction in a dose dependent manner, with an IC<SUB>50</SUB> value of 6.52 μ<SMALL>M</SMALL>. Therefore, this compound might provide a basis for novel anti-inflammatory agents.</P>

Poster Session 1 : Inhibitory effect of Aralia cordata Thunb. (Araliaceae) on matrix metalloproteinase-9 and invasiveness in hepatocarcinoma Hep3B cells

( Un Ho Jin ),( Sung Koo Kang ),( Ji Young Lee ),( Kyung Soo Nam ),( Sung Kwon Moon ),( Hyen Wook Chang ),( Jong Keun Son ),( Seung Ho Lee ),( Kun Ho Son ),( Cheorl Ho Kim ) 생화학분자생물학회 2005 생화학분자생물학회 춘계학술발표논문집 Vol.2005 No.-

Poster Session 1 : oral Presentation ; Gene Structure and Regulation : Inhibitory effect of Aralia cordata Thunb. (Araliaceae) on matrix metalloproteinase-9 and invasiveness in hepatocarcinoma Hep3B cells

( Un Ho Jin ),( Sung Koo Kang ),( Ji Young Lee ),( Kyung Soo Nam ),( Sung Kwon Moon ),( Hyen Wook Chang ),( Jong Keun Son ),( Seung Ho Lee ),( Kun Ho Son ),( Cheorl Ho Kim ) 생화학분자생물학회 2005 62회 KSBMB Annual Meeting in 2005 Vol.- No.-