키랄(S)-이부푸로펜 함유 고분자의 합성과 제조된 고분자의 분자 인식 메커니즘

Feng Yun Huang Fu,Bing Wang,Yan Sun 한국고분자학회 2013 폴리머 Vol.37 No.3

A group of molecularly imprinted polymers (MIPs) with specific recognition for chiral (S)-ibuprofen were successfully prepared based on hydrogen bonds, utilizing α-methacrylic acid as a functional monomer. The IR analysis of MIPs showed that the blue- and red-shifted hydrogen bonds were formed between templates and functional monomers in the process of self-assembly imprinting and re-recognition, respectively. According to UV-Vis analysis, we found that the ratio of host-guest complexes between template molecule and functional monomer was 1:1. The effect of crosslinker`s quantity on the polymerization was studied by transmission electron microscope (TEM). The adsorption selectivity experiments indicated that MIPs exhibited higher selectivity to (S)-ibuprofen than those to ketoprofen and (R)-ibuprofen, (S)-ibuprofen`s structural analogs.

SIMULATION AND EXPERIMENTAL STUDY OF A NEW ELECTROMECHANICAL BRAKE WITH AUTOMATIC WEAR ADJUSTMENT FUNCTION

Yun Feng Fu,Xin Hua Hu,Wei Rui Wang,Zheng Ge 한국자동차공학회 2020 International journal of automotive technology Vol.21 No.1

This paper presents a novel electromechanical brake (EMB) with automatic wear adjustment function, which has been ignored in most previous studies. With the aim of investigating the parameter characteristics of the EMB system and analyzing the proposed function, the mathematical models of the DC motor, motor friction, worm drive, ball screw and load are established in MATLAB/Simulink. The differences between the simulation and the experiment under step, triangular wave, square wave and sinusoidal input signals are discussed. The parameter characteristics of clamping force-motor current and clamping force-ball screw displacement are obtained, which also verifies that the established model is correct. The results demonstrate that the automatic wear adjustment function of the new EMB could guarantee that the brake stroke and response time remain consistent across each braking manoeuvre.

The Achievements and Prospects of Forage Breeding in China

Jin-Feng Yun,Lan Yun,De-Fu Liu 한국초지조사료학회 2009 한국초지조사료학회 학술대회논문집 Vol.2009 No.08

The main develop stages of forage breeding in China was reviewed. The achievements in forage germplasm collection, preservation and evaluation were briefed. Registration varieties were classified. The improvement of forage breeding methods and techniques were summarized. Finally, make prospects on forage breeding of China.

Clinical Value of Real Time Elastography in Patients with Unexplained Cervical Lymphadenopathy: Quantitative Evaluation

Fu, Ying,Shi, Yun-Fei,Yan, Kun,Wang, Yan-Jie,Yang, Wei,Feng, Guo-Shuang Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.13

Ultrasonography is non-invasive and can give useful clues in the diagnosis of cervical lymphadenopathy, However, differential diagnosis is difficult in some situations even combined with color Doppler imaging. The present study was conducted to evaluate the clinical value of real time elastography in patients with unexplained cervical lymphadenopathy using a quantitative method. From May 2011 to February 2012, 39 enlarged lymph nodes from 39 patients with unexplained cervical lymphadenopathy were assessed. All the patients were examined by both B-mode ultrasound, color Doppler flow imaging and elastography. The method of analyzing elasto-graphic data was the calculation of the 10 parametres ("mean", "sd", "area%", "com", "kur", "ske", "con", "ent", "idm", "asm") offered by the software integrated into the Hitachi system. The findings were then correlated with the definitive tissue diagnosis obtained by lymph node dissection or biopsy. Final histology revealed 10 cases of metastatic lymph nodes, 11 cases of lymphoma, 12 cases of tuberculosis and 6 cases of nonspecific lymphadenitis. The significant distinguishing features for conventional ultrasound were the maximum short diameter (p=0.007) and absent of echogenic hilum (p=0.0293). The diagnostic accuracy was 43.6% (17/39 cases) and there were 17 patients with equivocal diagnosis. For elastography, "mean" (p=0.003), "area%" (p=0.009), "kurt" (p=0.0291), "skew" (p=0.014) and "cont" (p=0.012) demonstrated significant differences between groups. With 9 of the 17 patients with previous equivocal diagnoses (52.9%) definite and correct diagnoses could be obtained. The diagnostic accuracy for conventional ultrasound combined elastography was 69.2% (27/39 cases). There were differences in the diagnostic sensitivity of the two methods (p=0.0224). Ultrasound combined with elastography demonstrated higher rates of conclusive and accurate diagnoses in patients with unexplained cervical lymphadenopathy than conventional ultrasound. The quantitative program showed good correlation with the pathology of different lymph node diseases.

Active Earth Pressure against Cantilever Retaining Walls with a Long Relief Shelf in Rotation about the Top

Yun Que,Xue-feng Gui,Fu-Quan Chen 대한토목학회 2023 KSCE Journal of Civil Engineering Vol.27 No.6

A cantilever retaining wall with a long relief shelf (CRW-LRS) is a particular type of retaining wall, but no studies have yet reported on rotation about the top of this type of retaining wall. This work studied failure mechanisms in semi-infinite non-cohesive soils in rotation about the top using the finite element elastoplastic analysis method (FEEA). By considering the influence of both the relief shelf and rotational stress from the soil, a formula for calculating the active earth pressure (Ea) was developed using the horizontal differential layer limit analysis method. Four different parameters were studied, i.e., unloading plate’s geometric conditions, heel length and the internal friction angle of the backfill, in terms of their influence on the Eadistribution, resultant force etc. The lowest Ea was found when the relief shelf’ relative position m = 0.4.

Causes, Features, and Outcomes of Drug-Induced Liver Injury in 69 Children from China

( Yun Zhu ),( Yong Gang Li ),( Jia Bo Wang ),( Shu Hong Liu ),( Li Fu Wang ),( Yan Ling Zhao ),( Yun Feng Bai ),( Zhong Xia Wang ),( Jian Yu Li ),( Xiao He Xiao ) 대한소화기학회 2015 Gut and Liver Vol.9 No.4

Background/Aims: Drug-induced liver injury (DILI) is a frequent cause of pediatric liver disease; however, the data on DILI are remarkably limited. Methods: All 69 children hospitalized with DILI between January 2009 and December 2011 were retrospectively studied. Results: A total of 37.7% of the children had medical histories of respiratory infection. The clinical injury patterns were as follows: hepatocellular 89.9%, cholestatic 2.9%, and mixed 7.2%. Liver biopsies from 55 children most frequently demonstrated chronic (47.3%) and acute (27.3%) hepatitis. Hypersensitivity features, namely, fever (31.9%), rash (21.7%), and eosinophilia (1.4%), were found. Twenty-four children (34.8%) developed chronic DILI. Antibiotics (26.1%) were the most common Western medicines (WMs) causing DILI, and the major implicated herbs were Ephedra sinica and Polygonum multiflorum. Compared with WM, the children whose injuries were caused by Chinese herbal medicine (CHM) showed a higher level of total bilirubin (1.4 mg/dL vs 16.6 mg/dL, p=0.004) and a longer prothrombin time (11.8 seconds vs 17.3 seconds, p=0.012), but they exhibited less chronic DILI (2/15 vs 18/39, p=0.031). Conclusions: Most cases of DILI in children are caused by antibiotics or CHM used to treat respiratory infection and present with hepatocellular injury. Compared with WM, CHM is more likely to cause severe liver injury, but liver injury caused by CHM is curable. (Gut Liver 2015;9:525-533)

Characteristics of wind loading on internal surface and its effect on wind-induced responses of a super-large natural-draught cooling tower

Yun-feng Zou,Zheng-yi Fu,Xu-hui He,Hai-quan Jing,Ling-yao Li,Hua-wei Niu,Zheng-qing Chen 한국풍공학회 2019 Wind and Structures, An International Journal (WAS Vol.29 No.4

Wind loading is one of important loadings that should be considered in the design of large hyperbolic natural-draught cooling towers. Both external and internal surfaces of cooling tower are under the action of wind loading for cooling circulating water. In the previous studies, the wind loads on the external surface attracted concernedly attention, while the study on the internal surface was relatively ware. In the present study, the wind pressure on the internal surface of a 220 m high cooling tower is measured through wind tunnel testing, and the effect of ventilation rate of the packing layer on internal pressure is a major concern. The characteristics of internal wind pressure distribution and its effect on wind-induced responses calculated by finite element method are investigated. The results indicate that the wind loading on internal surface of the cooling tower behaves remarkable three-dimensional effect, and the pressure coefficient varies along both of height and circumferential directions. The non-uniformity is particularly strong during the construction stage. Analysis results of the effect of internal pressure on wind-induced responses show that the size and distribution characteristics of internal pressure will have some influence on wind-induced response, however, the outer pressure plays a dominant role in the wind-induced response of cooling tower, and the contribution of internal pressure to the response is small.

Comparison of Three Kinds of Explants in Culture of Russian Wildrye Grass

Lan Yun,Jin-Feng Yun,De-Fu Liu 한국초지조사료학회 2009 한국초지조사료학회 학술대회논문집 Vol.2009 No.08

Thee kinds of explants, young spikes, immature and mature embryos, was compared in callus induction, embryogenic callus formation, differentiation and plant regeneration of Russian wildrye. Callus induction efficient of young spikes is highest. The imature embryos formed more somatic embryogenesis, and with highest frequency of embryogenic callus.

The basic helix–loop–helix transcription factors in the Colorado potato beetle Leptinotarsa decemlineata

Kai-Yun Fu,Qing-Wei Meng,Feng-Gong Lüa,Wen-Chao Guo,Tursun Ahmat,Guo-Qing Li 한국응용곤충학회 2015 Journal of Asia-Pacific Entomology Vol.18 No.2

The basic helix–loop–helix (bHLH) transcription factors possess crucial functions in cell proliferation, determination, differentiation, cell cycle maintenance and homeostasis or stress response pathways. Since a few juvenile hormone analogues such as hydroprene, methoprene and pyriproxyfen targeting a bHLH member Met are already registered for pest management, there is a potential to develop more insecticides targeting various bHLHs. The identification of bHLH members is the first step. Based on the transcriptome and the genome of the Colorado potato beetle Leptinotarsa decemlineata, the most important pest in potato, 49 bHLH members were identified. All LdbHLH memberswere defined by their names and families according to various phylogenetic analyses with bHLH homologues of Drosophila melanogaster, Apis mellifera, Bombyx mori and Tribolium castaneum. Among these LdbHLHs, 17, 10, 10, 1, 10 and 1 members belonged to A, B, C, D, E and F high-order groups, respectively. The results would provide useful background information for future studies on functions of bHLH proteins in the regulation of L. decemlineata development. Moreover, the bHLHs could serve as potential insecticide targets. These proteins could be used in small molecule screen, or in the development of RNAi-based pest management methods.

Static behavior of bolt connected steel-concrete composite beam without post-cast zone

Ying Xing,Yun Zhao,Qi Guo,Jin-feng Jiao,Qing-wei Chen,Ben-zhao Fu 국제구조공학회 2021 Steel and Composite Structures, An International J Vol.38 No.4

Although traditional steel-concrete composite beams have excellent structural characteristics, it cannot meet the requirement of quick assembly and repair in the engineering. This paper presents a study on static behavior of bolt connected steel-concrete composite beam without post-cast zone. A three-dimensional finite element model was developed with its accuracy and reliability validated by available experimental results. The analysis results show that in the normal service stage, the bolt is basically in the state of unidirectional stress with the loss of pretightening can be ignored. Parametric studies are presented to quantify the effects of the post-cast zone, size and position of splicing gap on the behavior of the beam. Based on the studies, suggested size of gap and installation order were proposed. It is also confirmed that optimized concrete slab in mid-span can reduce the requirement of construction accuracy.