A Real-Time Vibration Frequency Measurement System of Bridge Pier

Yao-Ming Hong,Jian-Rong Zeng,Yao-Chiang Kan,Hsueh-Chun Lin 보안공학연구지원센터 2014 International Journal of Hybrid Information Techno Vol.7 No.6

This study developed a real-time remote monitoring system (RTRMS) to receive the vibration frequency of bridge pier. The system included a front station and a middle station. A multi-hop wireless routing is employed to transmit the data from the front to the middle station. The front station includes a receiver equipped to receive the vibration frequency, and a wireless sensor network to transmit the data. The middle station is designed by an embedded system for storing the data. The pressure test shows that the loss rate of received data is less than 0.6%. The consuming power of one day is 3 ampere hours in the front station and 30 ampere hours in the middle station if the 12 voltage battery is used.

Low Specific On-resistance SOI LDMOS Device with P⁺P-top Layer in the Drift Region

Yao, Jia-Fei,Guo, Yu-Feng,Xu, Guang-Ming,Hua, Ting-Ting,Lin, Hong,Xiao, Jian The Institute of Electronics and Information Engin 2014 Journal of semiconductor technology and science Vol.14 No.5

In this paper, a novel low specific on-resistance SOI LDMOS Device with P+P-top layer in the drift region is proposed and investigated using a two dimensional device simulator, MEDICI. The structure is characterized by a heavily-doped $P^+$ region which is connected to the P-top layer in the drift region. The $P^+$ region can modulates the surface electric field profile, increases the drift doping concentration and reduces the sensitivity of the breakdown voltage on the geometry parameters. Compared to the conventional D-RESURF device, a 25.8% decrease in specific on-resistance and a 48.2% increase in figure of merit can be obtained in the novel device. Furthermore, the novel $P^+P$-top device also present cost efficiency due to the fact that the $P^+$ region can be fabricated together with the P-type body contact region without any additional mask.

Relationship Between Career Self-Efficacy and Nursing Competencies among Baccalaureate Nursing Graduates

Ming-Yueh Tseng,Shiow-Li Hwang,Mei-Yao Ho,Wei-Shu Lai,Yu-Jue Hong 한국간호과학회 2015 한국간호과학회 학술대회 Vol.2015 No.10

Optical Properties of Zinc-oxide Films Determined Using Spectroscopic Ellipsometry with Various Dispersion Models

Zhong-Hong Dai,Jie Shao,Yi-Ming Chen,Yu-Xiang Zheng,Jia-Da Wu,Liang-Yao Chen,Rong-Jun Zhang 한국물리학회 2009 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.55 No.3

In this work, we have studied the optical properties of wurtizite zinc-oxide films grown on silicon (100) substrates by means of pulsed laser deposition (PLD). Spectroscopic ellipsometry and three dispersion models, namely, the Sellmeier, Cauchy, and Forouhi-Bloomer models, were applied for determining the optical constants of the ZnO thin films. A comparison was made between two samples that were deposited for 30 minutes (sample I) and 60 minutes (sample II), respectively. X-ray diffraction analysis indicates that there are two types of preferred-orientation, i.e., (101) and (100) orientations for sample I and II, respectively. Results show that the Cauchy model gives the best fit for the samples with least root mean square error (RMSE) whereas the Forouhi-Bloomer model is most suitable for the data analysis in both the transparent and the absorption regions. The optical properties extracted from different dispersion models have been compared with the data reported in the literature. The results given in this work show that different dispersion models should be applied to obtain the optical constants In this work, we have studied the optical properties of wurtizite zinc-oxide films grown on silicon (100) substrates by means of pulsed laser deposition (PLD). Spectroscopic ellipsometry and three dispersion models, namely, the Sellmeier, Cauchy, and Forouhi-Bloomer models, were applied for determining the optical constants of the ZnO thin films. A comparison was made between two samples that were deposited for 30 minutes (sample I) and 60 minutes (sample II), respectively. X-ray diffraction analysis indicates that there are two types of preferred-orientation, i.e., (101) and (100) orientations for sample I and II, respectively. Results show that the Cauchy model gives the best fit for the samples with least root mean square error (RMSE) whereas the Forouhi-Bloomer model is most suitable for the data analysis in both the transparent and the absorption regions. The optical properties extracted from different dispersion models have been compared with the data reported in the literature. The results given in this work show that different dispersion models should be applied to obtain the optical constants

Low Specific On-resistance SOI LDMOS Device with P<SUP>+</SUP>P-top Layer in the Drift Region

Jia-Fei Yao,Yu-Feng Guo,Guang-Ming Xu,Ting-Ting Hua,Hong Lin,Jian Xiao 대한전자공학회 2014 Journal of semiconductor technology and science Vol.14 No.5

In this paper, a novel low specific onresistance SOI LDMOS Device with P<SUP>+</SUP>P-top layer in the drift region is proposed and investigated using a two dimensional device simulator, MEDICI. The structure is characterized by a heavily-doped P<SUP>+</SUP> region which is connected to the P-top layer in the drift region. The P<SUP>+</SUP> region can modulates the surface electric field profile, increases the drift doping concentration and reduces the sensitivity of the breakdown voltage on the geometry parameters. Compared to the conventional D-RESURF device, a 25.8% decrease in specific on-resistance and a 48.2% increase in figure of merit can be obtained in the novel device. Furthermore, the novel P<SUP>+</SUP>P-top device also present cost efficiency due to the fact that the P<SUP>+</SUP> region can be fabricated together with the P-type body contact region without any additional mask.

Inhibition of HBV replication and gene expression in vitro and in vivo with a single AAV vector delivering two shRNA molecules

( Zhi Li ),( Ming Liang He ),( Hong Yao ),( Qing Ming Dong ),( Yang Chao Chen ),( Chu Yan Chan ),( Bo Jian Zheng ),( Kwok Yung Yuen ),( Ying Peng ),( Qiang Sun ),( Xiao Yang ),( Marie C. Lin ),( Josep 생화학분자생물학회 2009 BMB Reports Vol.42 No.1

Thermus amyloliquefaciens sp. nov., isolated from a hot spring sediment sample.

Yu, Tian-Tian,Ming, Hong,Yao, Ji-Cheng,Zhou, En-Min,Park, Dong-Jin,Hozzein, Wael N,Kim, Chang-Jin,Wadaan, Mohammed A M,Li, Wen-Jun Society for General Microbiology 2015 International journal of systematic and evolutiona Vol.65 No.8

<P>A Gram-stain-negative, aerobic bacterium, designated strain YIM 77409T, was isolated from the Niujie hot spring in the Eryuan county of Dali, Yunnan province, south-west China. Cells of the strain were rod-shaped and colonies were yellow and circular. The strain grew at pH?6.0-8.0 (optimum, pH?7.0) and 50-70C (optimum, 60-65C). The predominant menaquinone was MK-8 and the DNA G+C content was 66.4?mol%. Major fatty acids (>10?%) were iso-C15?:?0 and iso-C17?:?0.The polar lipids consisted of one aminophospholipid, one phospholipid and two glycolipids. 16S rRNA gene sequence analysis showed that strain YIM 77409T formed a cluster with Thermus scotoductus DSM 8553T, Thermus antranikianii DSM 12462T, Thermus caliditerrae YIM 77925T and Thermus tengchongensis YIM 77924T, with highest 16S rRNA gene sequence similarity to T. scotoductus DSM 8553T (97.57?%). However, DNA-DNA hybridization indicated that strain YIM 77409T should be viewed as a representative of a novel species, as there was only 30.6??1.6?% reassociation with T. scotoductus DSM 8553T. On the basis of the morphological and chemotaxonomic characteristics, as well as the genotypic data, it is proposed that strain YIM 77409T represents a novel species of the genus Thermus, with the name Thermus amyloliquefaciens sp. nov. The type strain is YIM 77409T (?=?DSM 25898T?=?KCTC 32024T).</P>

Lifetime Prediction and Aging Behaviors of Nitrile Rubber Under Operating Environment of Transformer

Yi-Hua Qian,Hong-zhao Xiao,Ming-hao Nie,Yao-hong Zhao,Yunbai Luo,Shu-ling Gong 대한전기학회 2018 Journal of Electrical Engineering & Technology Vol.13 No.2

Based on the actual operating environment of transformer, the aging tests of nitrile butadiene rubber (NBR) were conducted systematically under four conditions: in air, in transform oil, under compression in air and under compression in transform oil to studythe effect of high temperature, transform oil and compression stress simultaneously on the thermal aging behaviors of nitrile butadiene rubber and predict the lifetime. The effects of liquid media and compression stress simultaneously on the thermal aging behaviors of nitrile butadiene rubber were studied by using characterization methods such as IR spectrosc-opy, thermogravimetric measurements, Differential Scanning Calorimetry (DSC) measurements and mechanical property measurements. The changes in physical properties during the aging process were analyzed and compared. Different aging conditions yielded materials with different properties. Aging at 70°C under compression stress in oil, the change in elongation at break was lower than that aging in oil, but larger than that aging under compression in air. The compression set or elongation at break as evaluation indexes, 50% as critical value, the lifetime of NBR at 25°C was predicted and compared. When aging under compression in oil, the prediction lifetime was lower than in air and under compression in air, and in oil. It was clear that when predicting the service lifetime of NBR in oil sealing application, compression and media liquid should be involved simultaneously. Under compression in oil, compression set as the evaluation index, the prediction lifetime of NBR was shorter than that of elongation at break as the evaluation index. For the life prediction of NBR, we should take into account of the performance trends of NBR under actual operating conditions to select the appropriate evaluation index.

8q24 rs4242382 Polymorphism is a Risk Factor for Prostate Cancer among Multi-Ethnic Populations: Evidence from Clinical Detection in China and a Meta-analysis

Zhao, Cheng-Xiao,Liu, Ming,Xu, Yong,Yang, Kuo,Wei, Dong,Shi, Xiao-Hong,Yang, Fan,Zhang, Yao-Guang,Wang, Xin,Liang, Si-Ying,Zhao, Fan,Zhang, Yu-Rong,Wang, Na-Na,Chen, Xin,Sun, Liang,Zhu, Xiao-Quan,Yuan Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.19

Background: Evidence supporting an association between the 8q24 rs4242382-A polymorphism and prostate cancer (PCa) risk has been reported in North American and Europe populations, though data from Asian populations remain limited. We therefore investigated this association by clinical detection in China, and meta-analysis in Asian, Caucasian and African-American populations. Materials and Methods: Blood samples and clinical information were collected from ethnically Chinese men from Northern China with histologically-confirmed PCa (n=335) and from age-matched normal controls (n=347). The 8q24 (rs4242382) gene polymorphism was genotyped by polymerase chain reaction-high-resolution melting analysis. We initially analyzed the associations between the risk allele and PCa and clinical covariates. A meta-analysis was then performed using genotyping data from a total of 1,793 PCa cases and 1,864 controls from our study and previously published studies in American and European populations, to determine the association between PCa and risk genotype. Results: The incidence of the risk allele was higher in PCa cases than controls (0.222 vs 0.140, $P=7.3{\times}10^{-5}$), suggesting that the 8q24 rs4242382-A polymorphism was associated with PCa risk in Chinese men. The genotypes in subjects were in accordance with a dominant genetic model (ORadj=2.03, 95%CI: 1.42-2.91, $Padj=1.1{\times}10^{-4}$). Presence of the risk allele rs4242382-A at 8q24 was also associated with clinical covariates including age at diagnosis ${\geq}65$ years, prostate specific antigen >10 ng/ml, Gleason score <8, tumor stage and aggressive PCa, compared with the non-risk genotype ($P=4.6{\times}10^{-5}-3.0{\times}10^{-2}$). Meta-analysis confirmed the association between 8q24 rs4242382-A polymorphism and PCa risk (OR=1.62, 95%CI: 1.39-1.88, $P=1.0{\times}10^{-5}$) across Asian, Caucasian and African American populations. Conclusions: The replicated data suggest that the 8q24 rs4242382-A variation might be associated with increased PCa susceptibility in Asian, Caucasian and African American populations. These results imply that this polymorphism may be a useful risk biomarker for PCa in multi-ethnic populations.

Lifetime Prediction and Aging Behaviors of Nitrile Butadiene Rubber under Operating Environment of Transformer

Qian, Yi-hua,Xiao, Hong-zhao,Nie, Ming-hao,Zhao, Yao-hong,Luo, Yun-bai,Gong, Shu-ling The Korean Institute of Electrical Engineers 2018 Journal of Electrical Engineering & Technology Vol.13 No.2

Based on the actual operating environment of transformer, the aging tests of nitrile butadiene rubber (NBR) were conducted systematically under four conditions: in air, in transform oil, under compression in air and under compression in transform oil to studythe effect of high temperature, transform oil and compression stress simultaneously on the thermal aging behaviors of nitrile butadiene rubber and predict the lifetime. The effects of liquid media and compression stress simultaneously on the thermal aging behaviors of nitrile butadiene rubber were studied by using characterization methods such as IR spectrosc-opy, thermogravimetric measurements, Differential Scanning Calorimetry (DSC) measurements and mechanical property measurements. The changes in physical properties during the aging process were analyzed and compared. Different aging conditions yielded materials with different properties. Aging at $70^{\circ}C$ under compression stress in oil, the change in elongation at break was lower than that aging in oil, but larger than that aging under compression in air. The compression set or elongation at break as evaluation indexes, 50% as critical value, the lifetime of NBR at $25^{\circ}C$ was predicted and compared. When aging under compression in oil, the prediction lifetime was lower than in air and under compression in air, and in oil. It was clear that when predicting the service lifetime of NBR in oil sealing application, compression and media liquid should be involved simultaneously. Under compression in oil, compression set as the evaluation index, the prediction lifetime of NBR was shorter than that of elongation at break as the evaluation index. For the life prediction of NBR, we should take into account of the performance trends of NBR under actual operating conditions to select the appropriate evaluation index.