A Study on the Functionality of Halophytes from Coast area of Jeollanam-do

Tae-Man Ha,Yang-Joon An,Mi-Yeong Shin,Sook Park,Hak-Jae Park,Hyo-Jeong Kang,Su-Jeong Choi,Jae-Yeong Yu,Ji-Yun Jeon,Gyu-Yeon Oh 한국식품영양과학회 2021 한국식품영양과학회 학술대회발표집 Vol.2021 No.10

This study was undertaken to improve the perceived value of halophytes and contribute to the activity of the local economy by analyzing the antioxidant activity and mineral content of Suaeda japonica, Tetragonia tetragonoides, and Spergularia marina that grow wild on the mud flats and coastal areas. The total phenolic compound content found in each order is as follows: Suaeda japonica (3.674∼5.989 mg TAE/g dry wt.), Tetragonia tetragonoides (2.515∼4.471 mg TAE/g dry wt.), and Spergularia marina (2.450∼4.067 mg TAE/g dry wt.); DPPH radical scavenging and ABTS cation radical scavenging activities were also recorded in the same order. In the case of minerals, Iron(Fe) was relatively high in Suaeda japonica (960.1∼1,346.7 mg/kg), Manganese(Mn) in Tetragonia tetragonoides (197.1∼574.8 mg/kg), and Zinc(Zn) was relatively high in Spergularia marina (63.19∼216.56 mg/kg). It was confirmed that the mineral content of Suaeda japonica, Tetragonia tetragonoides, and Spergularia marina was significantly higher than that of Chinese cabbage, lettuce, leek, and spinach.

독일의 경미범죄의 처리제도와 구체적 운영실태에 관한 연구

최영규,하태영 慶南大學校 法學硏究所 2005 慶南法學 Vol.20 No.-

광인터넷에서의 Edge Optical Label Switched Router의 구조에 관한 연구

최규봉,이현태 목원대학교 멀티미디어신기술연구소 2001 멀티미디어신기술연구소논문집 Vol.1 No.1

IPOW 기술은 파장이 갖는 특성으로 인하여 여러 가지 제약 사항을 갖고 있어 기존에 개발된 MPLS 기술을 효과적으로 적용하기 위해서는 WDM의 특성을 잘 분석하여 적용하여야 한다. 본 논문에서는 현재 IETF를 중심으로 연구중인 MPLambdaS 개념을 기초로 하여 광 인터넷의 진화를 고려한 구조적인 접근 방법을 연구한다. MPLS 도메인과 MPLambdaS 도메인간에 연동을 고려하여 전자적인 다수의 LSP를 광 LSP로 모으는 레이블 스택 개념을 이용한 Lambda LSP Tunneling 기술을 적용하여 전자적인 MPLS와 광 MPLambdaS 간의 연동 방안을 제안하고 이를 지원하는 Edge Optical LSR의 구조를 제안한다.

마른명태 식해의 향기성분과 기능성

최청,구태호,장운빈,최희진,우희섭,손규목 한국식생활문화학회 2002 韓國食生活文化學會誌 Vol.17 No.5

The volatile compounds of Myungtae (Alaska pollack) sikhae obtained by simultaneous steam distillation and extraction(SDE) apparatus were separated by gas chromatography(GC) and gas chromatography mass spectrometry(GC/MS). The totals of 155 volatile flavor components was identified in traditional Kyungsangdo Myungtae (Alaska pollack) sikhae, respectively. α-Zingihirene(11.03%) (E)-di-2-propenyl disulfide(7.95%) β-cironellol(6.02%), methyl allyl disulfide(3.58%), cryptone(3.39%), camphene(3.23%), pentano(3.21%), penadecanal(2.66%) and β-phellandrene(2.06%) were contained as the main compounds of Myungatae shikae. The fraction obtained from sikhae were tested for electron donating ability, angiotensin converting enzyme and xanthine oxidase inhibitory activity. There was no electron donation abilities(SC_50) of hexane and water fraction. On the other hand, the abilities of ethylacetate fraction and butanol fraction showed 310.64 ㎍.mL, 1096.49 ㎍/mL, respectively. Angiotensin converting enzyme inhibitory activities(IC_50) of ethylacetate fraction and butanol fraction were 1.623 mg/mL, 1.303 mg/mL, respectively. Xanthine oxidase inhibitory activities(IC_50) of ethylacetate fraction and butanol fraction were 3.591 mg/mL, 2.803 mg/mL, respectively.

하악 제3대구치와 하악관과의 위치관계에 대한 파노라마 방사선사진과 cone beam형 전산화단층영상의 비교

최형수,김규태,최용석,황의환 대한구강악안면방사선학회 2008 Imaging Science in Dentistry Vol.38 No.3

Purpose : To assess the diagnostic accuracy and value in an imaging technique field through the comparison of cone beam computed tomography and conventional panoramic radiography in assessing the topographic relationship between the mandibular canal and impacted third molars. Materials and Methods : Participants consisted of 100 patients offered the images through cone beam computed tomography and panoramic radiography. PSR-9000 Dental CT system (Asahi Roentgen Ind. Co., Ltd, Japan) was used as the unit of cone beam computed tomography. CE-II (Asahi Roentgen Ind. Co., Ltd, Japan) and Pro Max (Planmeca Oy, Finland) were used as the unit of panoramic radiography. The images obtained through panoramic radiography were classified into 3 types according to the distance between mandibular canal and root of mandibular third molar. And they were classified into 4 types according to the proximity of radiographic feature. The images obtained through cone beam computed tomography based on the classification above were classified into 4 types according to the location between the mandibular canal and the root and were analyzed. And they were classified into buccal, inferior, lingual, and between roots, according to the location between mandibular canal and root. The data were statistically analyzed and estimated by χ²-test. Results : 1. There was no statistical significance according to 3 types (type l, type ll, type lll) through CBCT. 2. The results of 4 types (type A, type B, type C, type D) through CBCT were as high prevalence of CBCT 1 in type A, CBCT 2 in type B, CBCT 3 in type C, and CBCT1 in type D and those of which showed statistical significance (P value=0.03). 3. The results according to location between mandibular canal and root through CBCT recorded each 49, 25, 17, 9 as buccal, inferior, lingual, between roots. Conclusion : When estimating the mandibular canal and the roots through the panoramic radiography, it could be difficult to drive the views of which this estimation was considerable. Thus it is required to have an accurate diagnostic approaching through CBCT that could estimate the location between mandibular canal and roots.

熱處理 硬化層을 고려한 有限要素解析의 試圖

최윤용,조상봉,김태규 慶南大學校 附設 工業技術硏究所 2003 硏究論文集 Vol.21 No.1

표면을 열처리한강은 어떤 깊이에 대하여 일반적으로 경도의 변화층을 가지고 있다고 잘 알려져 있다. 이것은 기계적 특성이 다른 두 재료를 붙여 놓은 것과 같은 이종재료간 접합구조물로 생각할 수 있을 것이다. 열처리 후에는 재료의 성질이 변화하는 것으로 알려져 있고, 경도 및 인장강도 등이 변화하는 물성치의 예이다. 그런데 재료의 탄성계수와 푸아송의 비가 열처리 후에 달라지는지에 대한 연구 결과는 찾기가 어렵다. 본 연구에서는 SM45C강 환봉의 열처리한 후에 탄성계수와 푸아송 비의 변화에 대하여 실험적으로 규명하고 열처리 경화층을 이종재료의 층으로 고려하여 탄성 응력해석해야 할지를 한 가지의 해석모델을 설정하여 검토하였다. In general, it is well known that the surface heat-treated steel has a certain depth of hardened layer with different hardness. The surface heat-treated steel can be thought as a dissimilar structure bonded by two materials which have different mechanical properties. Material properties are changed by heat treatment and hardness, tensile strength etc. are examples of changing material properties. To author's knowledge, it is difficult to find out the results of study for elastic modulus and Poisson's ratio of heat-treated materials. In this paper. Elastic modulus and Poisson's ratio for the heat-treated SM45C steel rod were investigated experimentally. Elastic finite element analysis was also performed to investigate that the surface heat-treated hardened layer must be considered as a dissimilar structure.

벼 밭재배에 따른 수량 및 미질

최원영,최민규,김상수,이규성,김태수,이재길 한국국제농업개발학회 2003 韓國國際農業開發學會誌 Vol.15 No.4

벼 밭재배시 논벼 품종들의 적응성을 검토하기 위하여 마늘 간작으로 벼를 건답점파하여 재배한 결과를 요약하면 다음과 같다. 1. 입모율은 밭벼에 비해 논벼 품종이 낮았는데 그 순서는 상남밭벼〉동진찰벼〉신선찰벼〉진부찰벼 순이었다. 2. 출수기는 상남밭벼에 비해 진부찰벼는 3일 빨랐고 신선찰벼는 9일, 동진찰벼는 12일이 늦었다. 3. ㎡당 수수와 등숙비율은 밭벼에 비해 논벼품종들이 높았다. 4. 쌀수량은 상남밭벼에 비해 신선찰벼는 12%가 많았고 동진찰벼는 같았으며, 진부찰벼는 18%가 적었다. 5. 완전립비율은 진부찰벼에서 높았고 그 외는 비슷하였으며, 식미지수는 상남밭벼에 비해 동진찰벼는 높았으나 진주찰벼와 신선찰벼는 낮았다. To identify the rice varieties adaptable for upland cultivation, a series of experiments was carried out at the field(Chonnam series) of the Muan. Cheonnam province during 1999 - 2001. Four varieties, Jinbuchalbyeo(early-maturing variety), Sinseonchalbyeo (medium-maturing variety), Dongjinchalbyeo(medium-late maturing variety), and Sangnambatbyeo as a standard variety for upland were used in this experiment. Seedling establishment of the varieties was the highest in Sangnambatbyeo and followed by Dongjinchalbyeo under upland condition. Heading date in general delayed ranges from 9 to 12 days, while early-maturing variety, Jinbuchalbyeo was faster for 3 days compared with Sangnambatbyeo. Number of panicle per square meter was similar in both lowland and upland rice but percentage of ripened grain was high in lowland rice. Milled rice yield was high as of 12% in Sinseonchalbyeo compared with Sangnambatbyeo. Head rice ratio showed also the highest in Sinseonchalbyeo. The results indicate that Sinseonchalbyeo as glutinous rice variety could adapt well in this upland condition, and have good milling recovery as head rice as well as yield advantage.

고추 바이러스 病에 關한 硏究

崔震植,尹泰圭 慶尙大學校 1972 論文集 Vol.11 No.-

1. 本大學附屬農場의 고추 栽培地에서 어떠한 바이러스가 分離되는가를 알기 위하여 寄主範圍를 中心으로 해서 實驗했다. 2. ??病株에서 採集分離한 바이러스는 3種類 였다. 그리고 이들 바이러스는 重複感染되어 있었다. 3. PVY는 우리나라의 고추 바이러스病源種類에 未記錄된 바이러스이다. 4. 種子 및 土壤傳染은 圃場의 ??病發生樣相에서 推察하면 可能性이 있으나 現在까지 本實驗에서 確認되지 않았다. In recent years, several types of virus diseases of pepper plants have been recognized in Korea as one of the mostdestructive diseases of pepper plants. Experiments have been made to determine viruses which are present in pepper plants affeced by mosaic diseases on the field. The results of theses experiments are summarized as follows; (1) Three viruses (TMV. CMV, PVY) were is~lated from mosaic pepper plants growing on the farm in Gyeongsang National University. Double infection of these viruses was abseraed frequently. (2) Potato virus Y as a pepper virus has not been reported in Korea yet. (3) Seed or soil-transmission has not been established experimentally yet, but the occurrence of the disease on the field seems to suggest it.

Cone beam형 전산화단층영상의 원리

최용석,김규태,황의환 대한구강악안면방사선학회 2006 Imaging Science in Dentistry Vol.36 No.3

The use of computed tomography for dental procedures has increased recently. Cone beam computed tomography (CBCT) systems have been designed for imaging hard tissues of the dentomaxillofacial region. CBCT is capable of providing high resolution in images of high diagnostic quality. This technology allows for 3-dimensional representation of the dentomaxillofacial skeleton with minimal distortion, but at lower equipment cost, simpler image acquisition and lower patient dose. Because this technology produces images with isotropic sub-millimeter spatial resolution, it is ideally suited for dedicated dentomaxillofacial imaging. In this paper, we provide a brief overview of cone beam scanning technology and compare it with the fan beam scanning used in conventional CT and the basic principles of currently available CBCT systems.

정수처리 공정에서 철과 망간 잔류 농도에 관한 연구

최미리,서규태,문병현,이택순 7개 국립대학교 환경연구 논문집 공동발행 위원회 2003 공업기술연구 Vol.3 No.-

This study was to investigate the cause of the color and turbidity in a small-scale water treatment plant using lakes water as water supply source. Water qualities in aqueducts, in depth of the lakes and in each process were measured. And effects of prechlorination on each unit operation in the water treatment, especially on iron and manganese removal, were studied. The concentration of iron and manganese was 0.13, 0.08 mg/L in the surface water and 1.93 and 0.433 mg/L in 15 m depth of the lake. Higher iron concentration of the inlet was measured to 5.35 mg/L which was caused by the steel aqueduct corrosion. The optimun coagulation dosages of Poly Aluminum Chloride(PAC) and Liquid Aluminum Sulfate (LAS) were 17.5 mg/L and 35 mg/L. Pretreatmnet of raw water with CaCOl improved the removal efficiencies of iron and manganes. However, more efficient method for removing iron and manganes was required.