면역성 혈소판감소성 자반증 및 호중구감소증을 동반한 궤양성 대장염 2예

남승우,양석균,김진천,지현숙,김우건,정훈용,박주상,홍원선,민영일 大韓消化器病學會 1999 大韓消化器病學會誌 Vol.33 No.1

구형 Helicobacter pylori의 중성구 매개 산화활성

홍원선,김혜원,이학성,명승재,정훈용,양석균,김진호,민영일,정명희 대한암예방학회 2000 Journal of cancer prevention Vol.5 No.3

Propofol 정맥 주사 시 Metoclopramide의 통증 완화 효과

김수진,박은지,안승원,김웅,김미운,임현술 대한마취과학회 2002 Korean Journal of Anesthesiology Vol.43 No.5

Background: Propofol is a good induction agent. but it has a disadvantage of pain on intravenous injection. Pretreatment of metoclopramide or lidocaine have been reported to reduce pain on injection. thus, we have evaluated the quantity and quality of anagesic effect of metoclopramide and lidocaine. We observed differences in quality of pain according to venous cannula sizes and intravenous injection sites as well as nausea and vomiting in the postoperative state. Methods: Eighty patients scheduled for an elective operation by general anesthesia were chosen according to ASA (Ⅰ or Ⅱ) and divided into four groups randomly. Each group was injected through venous cannulas with normal saline (control group), metoclopramide 5 mg (group 1), netoclopramide 10 mg (group 2), or 2% lidocaine 40 mg (group 3) respectively. Then, propofol was injected of a 2 mg/kg dose with 0.5 ml/sex to all groups and we asked questions about injection pain after 10 seconds. Results: Pain relief was shown in all groups compared with the control. but metoclopramide 10 mg and lidocaine 40 mg pretreatment groups showed significant pain reief. Pain was relieved significantly when the drug was injected in the antecubital area. Postoperative nausea and vomiting were not observed. Conclusions: Metoclopramide 10 mg or lidocaine 40 mg pretreatment to induction by propofol revealed a good analgesic effect for propofol injection pain. (Korean J Anesthesiol 2002; 43: 558~565)

평야지재배 조생종 벼의 이화학적 및 식미특성 분석

정진일,김기영,최윤희,최원영,고종철,오명규,홍하철,이승엽,이명철 한국국제농업개발학회 2004 韓國國際農業開發學會誌 Vol.16 No.4

평야지재배 적응 조생종 벼 품종의 선발 및 품종 육성의 기초 자료로 활용코자 극조생종(1품종)과 조생종(10품종) 및 준조생(3품종)등 총 14품종을 산간지(운봉)와 평야지(익산)에 지역별 표준재배법으로 공시한 결과, 1. 극조생종 및 조생종들은 감온성이 커 산간지에서 출수가 빠르나, 준조생종에 속하는 상미벼, 영덕34호, 히또메보레 등은 감광성이 감온성보다 커, 평야지재배에서 4일정도 빨리 출수하였다. 2. 수량성은 대부분의 품종들이 산간지재배에 비해 평야지 재배에서 높았고 대체로 출수가 빠른 품종일수록 지역간의 수량차가 크게 나타났으며, 출수가 다소 늦은 준조생종들은 산간지와 평야지의 재배에서 수량차가 크지 않아 산간지 뿐만 아니라 평야지에서도 적응성이 높았다. 3. 단백질함량은 숙기가 다소 늦은 품종일수록 낮은 경향을 보였고 산간지보다는 평야지에서 낮았으며, 품종간에는 오대벼, 운봉30호, 영덕34호, 신석조생, 상미벼 등이 함유량이 낮았다. 4. 식미치는 산간지재배가 평야지에 비해 보다 높게 나타났고, 출수가 늦을수록 높았으며, 지역간 차가 크게 나타난 품종은 극조생종인 키라라397이었고, 출수가 늦은 상미벼와 히또메보레는 차가 적었다. 5. 산온도와 수량과의 상관은 산간지에서만 영향이 있을 뿐 평야에서는 영향이 적고 일사량과 일조시수가 수량에 보다 상관성이 높았으며, 식미치는 적산온도와는 부의상관, 생육 일수와는 정상관을 보였다. This experiment was carried out to clarify the difference of rice yield and the quality of rice in southern plan area and in alpine area. Yield and quality of fourteen early varieties were investigated under the different transplanting dates and planting densities in southern plan area(Iksan) and in alpine area(Unbong). In the alpine area, extremely early variety and early varieties headed early compared to the plain area, but medium early varieties headed about 4 days late unlike the alpine area. The yield difference of most early varieties including Kilara 397 of extremely early flowering variety were greater in plain area than in alpine. The different of yield between plain and alpine area was less in varieties with Sinseogjosaeng, Odaebyeo, Akidagomachi, and Yeungdeuk34. The rate of protein was lower in plain area than alpine and more lately flowering than early, but palatability of milled rice was higher at the alpine area and more lately flowering varieties. Correlation coefficients between yield and meterological data during maturity, yield shower the significant correlation with integrated solar radiation and sunshine hours at cultured in southern plan area, but it showed only cumulative temperature in alpine area. Palatability of miller rice was positive correlation at growth duration but negative correlation at cumulative temperature.

외상성 하인두-경부 식도 손상

이강진,성명훈,박범정,성원진,노종렬,정산신,이승신,김광현 대한이비인후과학회 2001 대한이비인후과학회지 두경부외과학 Vol.44 No.11

고압 커패시터의 고장 분석을 통한 신뢰도 예측

양석준,김진우,신승우,이희진,신승훈,유동수,장석원 한국비파괴검사학회 2001 한국비파괴검사학회지 Vol.21 No.6

본 논문은 고압 커패시터의 고장분석과 신뢰성 예측 결과를 다루고 있다. 부품의 수명과 고장률을 예측하기 위해서 두 가지 방법으로 고장 모드와 고장 메커니즘을 연구하였다. 에폭시 수지로 성형된 고압 커패시터가 절연내압 시험 하에서 저항이 제로로 되는 고장에 대하여, 근본원인 고장분석 체계를 효과적으로 수립함으로써 고장 메커니즘의 원인을 분석하였다. 특히 세라믹-에폭시 계면에서의 절연파괴 고장 현상이 강조되었으며, 본 연구에서 얻어진 결과의 타당성은 마그네트론에 장착된 고압 커패시터의 열사이클 시험 수행에 의한 가속시험 결과로부터 입증되었다. 시험 결과들은 결함이 있는 로트를 신속히 규명하고 B10수명을 결정하는데 유용하게 사용할 수 있다. 또한, 유전체의 절연파괴에 대해서 부하-강도 간섭모델을 이용하여 고장률을 예측하였다. This paper presents a result of failure analysis and reliability evaluation for high voltage ceramic capacitors. The failure modes and failure mechanisms were studied in two ways in order to estimate component life and failure rate. The causes of failure mechanisms for zero resistance phenomena under withstanding voltage test in high voltage ceramic capacitors molded by epoxy resin were studied y establishing an effective root cause failure analysis. Particular emphasis was placed on breakdown phenomena at the ceramic-epoxy interface. The validity of the results in this study was confirmed by the results of accelerated testing. Thermal cycling test for high voltage ceramic capacitor mounted on a magnetron were implemented. Delamination between ceramic and epoxy, which might cause electrical short in underlying circuitry, can occur during curing or thermal cycle. The results can be conveniently used to quickly identify defective lots, determine B10 life estimation each lot at the level of inspection, and detect major changes in the vendors processes. Also, thd condition for dielectric breakdown was investigated for the estimation of failure rate with load-strength interference model.

잠복원발종양의 원발병소 진단시 내시경 유도하 생검 및 구개편도적출의 진단적 의의

김세헌,김광문,이준협,이승수,서진원,홍원표 대한이비인후과학회 1998 대한이비인후과학회지 두경부외과학 Vol.41 No.3

수면장애의 통합적 치료를 위한 수면센터의 역할

정화경,최희연,김진우,김선종,이승신,배정호,임원정,이향운 이화여자대학교 의과학연구소 2013 EMJ (Ewha medical journal) Vol.36 No.2

The prevalence of sleep disorder is about 30% of the population. Common sleep disorders are insomnia, obstructive sleep apnea, narcolepsy, restless legs syndrome, rapid eye movement sleep behavior disorder and parasomnia. These sleep disorders lead various medical and mental complications. However, most sleep disorders are underdiagnosed and not treated appropriately. Sleep medicine is important for treating these sleep disorders and maintaining general healthy conditions. Specialized and comprehensive treatments for sleep disorder are important in sleep medicine.

Comparison of one-jaw and two-jaw orthognathic surgery in patients with skeletal Class III malocclusion using data from 10 multi-centers in Korea: Part I. Demographic and skeletodental characteristics

Seung-Weon Lim,Minsoo Kim,Mihee Hong,Kyung-Hwa Kang,Minji Kim,Su-Jung Kim,Yoon-Ji Kim,Young Ho Kim,Sung-Hoon Lim,Sang Jin Sung,Seung-Hak Baek,Jin-Hyoung Cho 대한치과교정학회 2022 대한치과교정학회지 Vol.52 No.1

Objective: To investigate demographic and skeletodental characteristics of one-jaw (1J-OGS) and two-jaw orthognathic surgery (2J-OGS) in patients with skeletal Class III malocclusion. Methods: 750 skeletal Class III patients who underwent OGS at 10 university hospitals in Korea between 2015 and 2019 were investigated; after dividing them into the 1J-OGS (n = 186) and 2J-OGS groups (n = 564), demographic and skeletodental characteristics were statistically analyzed. Results: 2J-OGS was more frequently performed than 1J-OGS (75.2 vs. 24.8%), despite regional differences (capital area vs. provinces, 86.6 vs. 30.7%, p < 0.001). Males outnumbered females, and their mean operation age was older in both groups. Regarding dental patterns, the most frequent maxillary arch length discrepancy (ALD) was crowding in the 1J-OGS group (52.7%, p < 0.001) and spacing in the 2J-OGS group (40.4%, p < 0.001). However, the distribution of skeletal pattern was not significantly different between the two groups (all p > 0.05). The most prevalent skeletal patterns in both groups were hyper-divergent pattern (50.0 and 54.4%, respectively) and left-side chin point deviation (both 49.5%). Maxillary spacing (odds ratio [OR], 3.645; p < 0.001) increased the probability of 2J-OGS, while maxillary crowding (OR, 0.672; p < 0.05) and normo-divergent pattern (OR, 0.615; p < 0.05) decreased the probability of 2J-OGS. Conclusions: In both groups, males outnumbered females, and their mean operation age was older. The most frequent ALD was crowding in the 1J-OGS group, and spacing in the 2J-OGS group, while skeletal characteristics were not significantly different between the two groups.

Construction reproducibility of a composite tooth model composed of an intraoral-scanned crown and a cone-beam computed tomography-scanned root

Seung-Weon Lim,Ryu-Jin Moon,Min-Seok Kim,Min-Hee Oh,Kyung-Min Lee,Hyeon-Shik Hwang,Tae-Woo Kim,Seung-Hak Baek,Jin-Hyoung Cho 대한치과교정학회 2020 대한치과교정학회지 Vol.50 No.4

Objective: To evaluate the construction reproducibility of a composite tooth model (CTM) composed of an intraoral-scanned crown and a cone-beam computed tomography (CBCT)-scanned root. Methods: The study assessed 240 teeth (30 central incisors, 30 canines, 30 second premolars, and 30 first molars in the maxillary and mandibular arches) from 15 young adult patients whose pre-treatment intraoral scan and CBCT were available. Examiner-Reference (3 years’ experience in CTM construction) and Examiners-A and Examiner-B (no experience) constructed the individual CTMs independently by performing the following steps: image acquisition and processing into a three-dimensional model, integration of intraoral-scanned crowns and CBCT-scanned teeth, and replacement of the CBCT-scanned crown with the intraoral-scanned crown. The tooth axis angle in terms of mesiodistal angulation and buccolingual inclination of the CTMs constructed by the three examiners were measured. To assess the construction reproducibility of CTMs, intraclass correlation coefficient (ICC) assessments were performed. Results: The ICC values of mesiodistal angulation and buccolingual inclination among the 3 examiners showed excellent agreement (0.950–0.992 and 0.965–0.993; 0.976–0.994 and 0.973–0.995 in the maxillary and mandibular arches, respectively). Conclusions: The CTM showed excellent construction reproducibility in mesiodistal angulation and buccolingual inclination regardless of the construction skill and experience levels of the examiners.