http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
( Jeong Sook Kim ),( In Ok Lee ),( Kyung Jin Eoh ),( Young Shin Chung ),( Inha Lee ),( Jung-yun Lee ),( Eun Ji Nam ),( Sunghoon Kim ),( Young Tae Kim ),( Sang Wun Kim ) 대한산부인과학회 2017 Obstetrics & Gynecology Science Vol.60 No.2
Objective This study aimed to introduce a method to remove huge ovarian tumors (≥15 cm) intact with single-port laparoscopic surgery (SPLS) using SW Kim`s technique and to compare the surgical outcomes with those of laparotomy. Methods Medical records were retrospectively reviewed for patients who underwent either SPLS (n=21) with SW Kim`s technique using a specially designed 30×30-cm2-sized 3XL LapBag or laparotomy (n=22) for a huge ovarian tumor from December 2008 to May 2016. Perioperative surgical outcomes were compared. Results In 19/21 (90.5%) patients, SPLS was successfully performed without any tumor spillage or conversion to multi-port laparoscopy or laparotomy. There was no significant difference in patient characteristics, including tumor diameter and total operation time, between both groups. The postoperative hospital stay was significantly shorter for the SPLS group than for the laparotomy group (median, 2 [1 to 5] vs. 4 [3 to 17] days; P<0.001). The number of postoperative general diet build-up days was also significantly shorter for the SPLS group (median, 1 [1 to 4] vs. 3 [2 to 16] days; P<0.001). Immediate post-operative pain score was lower in the SPLS group (median, 2.0 [0 to 8] vs. 4.0 [0 to 8]; P=0.045). Patient-controlled anesthesia was used less in the SPLS group (61.9% vs. 100%). Conclusion SPLS was successful in removing most large ovarian tumors without rupture and showed quicker recovery and less immediate post-operative pain in comparison to laparotomy. SPLS using SW Kim`s technique could be a feasible solution to removing huge ovarian tumors.
Benzoate, m-Toluate, Phenol의 Pseudomonas putida에 의한 생분해
김장규,김석형,김태환,이대광,김남기 成均館大學校 科學技術硏究所 1993 論文集 Vol.44 No.1
It this study, basic data were obtained for the treatment of industrial waste water which includes aromatic compounds. Substrate concentrations used were 100ppm, 500ppm, and 1,000pprn and initial pH's were pH6, pH7, and pH8 in order to obtain the optimum conditions for treating benzoate, m-toluate, and phenol by Pseudomonas putida(KCTC 1644). Durations were 20hrs for 100ppm, 40hrs for 500ppm, and 60hrs for 1,000ppm before the static growth of Pseudomonas putida. 100% of 100ppm benzoate(0.31g cell/1) was biodegraded at pH6, pH7, and pH8 before 20hrs, 52.8% of 500ppm at pH8 in 40hrs, and 27.9% of 1,000ppm at pH8 in 60hrs. The best initial pH was pH8 for the biodegradation and the growth of Pseudomonas putida in benzoate medium. For m-toluate, the best initial pH was also pH8. At this pH, 40.6% of 10Dppm(0.31 cell/1), 21.9% of 500ppm, and 14.1% of 1,000ppm m-toluate were biodegraded respectively in limited time. But for phenol, the best initial pH was pH7. At this point, 9.8% of 100ppm(0.218 cell/1), 7.1% of 500ppm, and 4.7% of 1,000ppm phenol were biodegraded respectively. Therefore, the best carbon source in this experiment was benzoate. Pseudomonas putida was also able to biodegrade m-cresol, p-hydroxybenzoic acid, and benzaldehyde.
Tae Chul Moon,Chang Seob Seo,Kyungmi Haa,Jin Cheul Kim,Nam Kyung Hwang,Tae Gyun Hong,Jee Hyeun Kim,Do Hun Kim1,손종근,장현욱 대한약학회 2008 Archives of Pharmacal Research Vol.31 No.5
Meso-dihydroguaiaretic acid (MDGA) is a medicinal herbal product isolated from the aerial parts of Saururus chinensis that inhibits the cyclooxygenase-2 (COX-2)-dependent phase of prostaglandin D2 (PGD2) generation in bone marrow-derived mast cells (BMMC) (IC50 9.8 μM). However, this compound did not inhibit COX-2 protein expression in BMMC at concentrations up to 30 μM, indicating that MDGA directly inhibits COX-2 activity. In addition, this compound consistently inhibited the production of leukotriene C4 (IC50 1.3 μM). These results demonstrate that MDGA inhibits both COX-2 and 5-lipoxygenase. Furthermore, this compound strongly inhibited the degranulation reaction in BMMC (IC50 11.4 μM). Therefore, this compound might provide a basis for novel anti-inflammatory drug development.
Tae‑Young Kim,Tae‑Wook Na,Hyung‑Seok Shim,Yong‑Keun Ahn,Yong‑Kwon Jeong,Heung Nam Han,Nong‑Moon Hwang 대한금속·재료학회 2021 METALS AND MATERIALS International Vol.27 No.12
Penetrating morphologies at the growth front of abnormally-growing Goss grains in Fe–3%Si steel was examined in view ofthe possibility that they are the two-dimensional section of the solid-state wetting (SSW) along the triple junction line. Toobtain the statistically meaningful data, 102 penetrated grain and 204 penetrating abnormally-growing Goss grain morphologieswere examined. The misorientation angles of penetrating and penetrated grains were measured by electron backscattereddiffraction. Among the 102 examined penetrated grain boundaries, none has low misorientation angles less than 15°,whereas 17.2% of the 204 penetrating grain boundaries have low misorientation angles, and 23.5% of them have coincidencesite lattice boundaries. Besides, boundary energies of penetrating Goss grains, which were estimated from misorientationangles of the three grains in the penetrating morphology, satisfied the energetic condition for SSW along the triple junctionline. These results imply that the abnormal grain growth of Goss grains in Fe–3%Si steel occurs by the mechanism of subboundaryenhanced SSW.
Melt spinning 법으로 제조된 Ti-Ni-Cu 합금리본의 상변태거동 및 형상기억특성
金載勳,崔美善,李喜佑,金泰俊,김연욱,南泰鉉 대한금속재료학회 2002 대한금속·재료학회지 Vol.40 No.7
Phase transformation behavior and shape memory characteristics of Ti-Ni-Cu alloy ribbons fabricated by melt spinning have been investigated by means of differential scanning calorimetry, X-ray diffraction, optical microscopy and thermal cycling tests under constant load. With increasing linear velocity and decreasing ejection pressure, transformation start temperatures of ribbons decreased and stability of the B19 martensite was lowered, comparing to those of alloys fabricated by conventional casting since the cooling rate increased. Only after heat treating ribbons at temperatures higher than 873 K where recrystallization occurred, the B19 martensite was observed in Ti-40Ni-10Cu alloy ribbons. Transformation elongation and hysteresis associated with the B2-B19 transformation in Ti-Ni-Cu alloy ribbons decreased with increasing Cu-content, which was attributed to the decrease in lattice deformations. Transformation elongations of ribbons were larger than those of alloys made by casting, which was closely related to a texture developed in ribbons.
김명철,김덕환,신상태,임준호,김남중,김종만 충남대학교 수의과대학 동물의과학연구소 1998 動物醫科學硏究誌 Vol.6 No.-
Abomasal impaction with cecal dilatation was diagnosed in a 3 years old holstein cow. The clinical signs were loss of appetite, scant feces and moderate distension of the abdomen. Ping sound was revealed in the right 11th intercostal space by auscultation. Cecal dilatation and abomasal impaction were ascertained by right flank laparotomy and abdominal exploration, and intestinal content and gas were removed from the cecal apex incised. One day later, 2.5㎏ of sand was removed by ventral paramedian abomasotomy.
홍창우,김태경,김경진,김성환,김남윤,심도식,이정호,윤청호,백민경,원치문,박제선,이주형,정경일 강원대학교 석재복합신소재제품연구센터 1996 석재연 논문집 Vol.1 No.-
콘크리트 구조물이 대형화됨에 따라 설계단면이 증대되어 상대적으로 많은 경제적 손실을 부담하게 된다. 따라서 단면을 감소시키면서도 소요의 하중에 안전한 구조물을 건설하기 위해서는 우선적으로 구조물 건설에 기초가 되는 고품질, 고내구성의 고강도 콘크리트 개발이 절실히 요구된다 본 연구에서는 일정 시멘트비 및 혼화재 비율하에서 소요의 워커빌리티가 확보되는 고강도 콘크리트를 시간과 온도의 변화에 따라 증기 양생하여, 압축, 인장, 휨강도 뿐만 아니라 파괴특성을 실험적으로 연구하였다. 시료 제작시 시멘트 입자 사이의 공극 및 불연속 영역을 충전하여 고밀도화하기 위한 콘크리트용 혼화재로 시멘트 비표면적이 상당히 작은 초미립 분말인 실리카흄을 이용하였다. 또한 AE감수제 및 고성능 유동화제를 사용하여 혼화재의 첨가에 의하여 발생될 수 있는 워커빌리티의 감소를 방지하였다. 실험결과에 의하면 일정 양생 지속 시간하에서 온도의 증가에 따라 콘크리트의 압축, 인장 및 휨강도가 전반적으로 증가하였다. 동일하게 일정 온도하에서 양생 지속시간이 커짐에 따라 강도들이 증가됨을 알 수 있었다. 따라서 상대적으로 높은 온도와 긴 지속 양생 조건하에서 파괴에 대한 저항력이 크게 나타났다. The compressible, tensible, and flexibleresistance of the high strength concrete is analyzed by the experimentation in the present study. For the test, we cure several samples with the silica fume as a mixture being become dense the spaces between the particle of cement under the variation of both the temperature and the curing-interval. Then, the superplasticizer and the ezcon are also used to satisfy the required workability for construction. The compressible, tensible, and flexible resistances to a stress are increased as increasing the temperature and the time interval for the curing. Therefore it is concluded that the overal fractural and mechanical properties is improved by mixing the silica fume into the cement.