남병철의 혼천의 연구 I

이용삼,김상혁,남문현,LEE YONG-SAM,KIM SANG-HYUK,NAM MOON-HYON 한국천문학회 2001 Journal of The Korean Astronomical Society Vol.34 No.1

In this paper we have reconstructed an armillary sphere based on the Method of an Armillary Sphere Making described in the Volume 1 of The Collection of Writings on the Scientific Instruments-Uigijipsol (儀器輯說, two volumes) edited in the 1850's by Nam Byong-Chul (南秉哲, 1817-1863) who was a famous Korean states-man-scientist. Nam achieved convenience and accuracy in the measurements of stellar positions in the manner of selective setting the equatorial, ecliptic and horizontal poles by adding a pole axis exchange ring called Jaigeukkwon (載極圈) between the Three Arrangers of Time and Four Displacements. We made use of 3-dimensional graphic software for modelling Nam's armillary sphere which consisted of five layers-eight rings. Results of simulation showed that the pole axis exchange ring functioned properly in setting the equatorial, ecliptic and horizontal coordinates simply by exchange of positions of specified holes on the ring. We ascertained that the invention of Jaigeukkwon solved inherent problems in the conventional Chinese armillary sphere in computation of real ecliptic coordinates. It was revealed that Nam Byong-Chul made great contributions in the East Asian history of armillary sphere making.

플라비아닌산을 이용한 클로르프마진의 용매추출 분광광도법

정문모,남수자,이미나,이지연,허문회,안문규 慶星大學校 1998 論文集 Vol.19 No.2

The Evolving Policy Debate on Border Closure in Korea

Su-Jin Kang,Jihyun Moon,Heewon Kang,Heekyoung Nam,Sangwoo Tak,Sung-Il Cho 대한예방의학회 2020 Journal of Preventive Medicine and Public Health Vol.53 No.5

302 Copyright © 2020 The Korean Society for Preventive Medicine J Prev Med Public Health 2020;53:302-306 • https://doi.org/10.3961/jpmph.20.213 The Evolving Policy Debate on Border Closure in Korea SuJin Kang1, Jihyun Moon2, Heewon Kang1, Heekyoung Nam3, Sangwoo Tak1, Sung-il Cho1,3 1Institute of Health and Environment, Seoul National University, Seoul, Korea; 2Samsung Advanced Institute of Health Science and Technology, Sungkyunkwan University, Seoul, Korea; 3Department of Public Health Sciences, Graduate School of Public Health, Seoul National University, Seoul, Korea Brief Report Objectives: In this paper, we aimed to investigate the evolving debate over border closure in Korea during the coronavirus disease 2019 (COVID-19) pandemic, to address the main themes associated with border closure, and to discuss the factors that need to be considered when making such decisions. Methods: We collated and reviewed previously conducted review studies on border closures during infectious disease outbreaks to derive relevant themes and factors. Results: According to our systematic review on border closures and travel restrictions, the effects of such containment efforts are limited. We suggest considering the following factors when determining whether to impose border closure measures: (1) disease characteristics, (2) timeliness of implementation, (3) transmission delay and the basic reproduction number, (4) globalization and pandemics, and (5) social and economic costs. Conclusions: Our assessment indicates that the effects of border closures are at best temporary and limited. Alternative measures must be contemplated and implemented to suppress the spread of COVID-19 in particular and infectious diseases more broadly.

도.토기의 과학적 분석-경상남도 도요지 출토 토기편을 중심으로

홍종욱,조남철,황진주,문환석,Hong, Jong-Ouk,Cho, Nam-Chul,Hwang, Jin-Ju,Moon, Whan-Suk 국립문화재연구소 2001 保存科學硏究 Vol.22 No.-

The scientific analysis and provenance study of potteries excavated from kiln site at Gyeongsang Nam-do were carried out using XRD, ICP-AES and NAA. We can summary the following Result :1. As a result of XRD analysis, it showed that soft potteries consisted of quartz, feldspar and clay minerals while hard potteries consisted of high temperature crystals such as mullite, tridymite, cristobalite.In case of firing temperature which are determined by XRD, potteries consisted of quartz, feldspar and clay mineral had very low firing temperature. While potteries having only cristobalite ranged above $1200^{\circ}C$.2. As a result of correlation analysis using trace element, the selected characteristic elements which was able to distinguish from each kiln site was Sm, Cs, Sc, Eu, Hf.3. Discriminant analytical showed that each kiln site were classified into 4-gruops;Kimhaeci Daesungdong, Hamangun Myosari, Changyounggun Yochori and one group mixed KimhaeciGuosandong, Kimhaeci Samgyeri. This suggests that there are no correlations between the raw materials used in each kiln sites except Kimhaeci Guosandong, Kimhaeci Samgyeri.

철근콘크리트 T형교의 내하력 증진

남문희,정희효,이관희,박준용 慶尙大學校生産技術硏究所 1996 生産技術硏究所論文集 Vol.12 No.-

Even though there are a lot of methods of promotion of load resistance for reinforced concrete T-beam bridge, the methods have been faults respectively. In this study, we will convert simple supported T-beam into continuous T-beam for promotion of load resistance and cancel joint. This method is decidedly superior to another method in maintenance, construction, economics and external appearance.

모델 추종형 적응 퍼지 제어기의 설계

남문현,김낙교,손재현 건국대학교 산업기술연구원 1995 건국기술연구논문지 Vol.20 No.-

In this paper, reference-model following fuzzy controller (RMFFC) was proposed in order to overcome the difficulty of extracting rules and defects of the adaptation performance in the FLC. RMFFC comprised inner feedback loop consisting of the FLC and plant, and outer loop consisting of adaptation mechanism which of the FLC. A Referenced-model was used for design criteria of a fuzzy controller which characterizes and quantizes the control performance required in the overall control system. Tuning control rules of FLC is performed by the adaptation mechanism. For this, the fuzzy model for tuning the control rules is designed in accordance with the feature of error information. Proposed algorithm was verified through simulation for various plant models which have different characteristics. And the results are obtained as follows. 1) Control performance required by a skilled operator was reflected to the control. 2) Unnecessary rule modification did not occur in steady-state, after completion of learning, by using the following error information 3) Performance of RMFFC was improved in various disturbances, comparing with conventional FLC and MRAC.

단순 P C교의 지점부 연결에 의한 연속 P C교화에 관한 연구

남문희,이관희 慶尙大學校生産技術硏究所 1995 生産技術硏究所論文集 Vol.11 No.-

This paper is the study on continuous prestressed concrete bridge by connecting the node of simple prestress concrete bridge. The purpose of the study is the review of reduced positive bending moment at center of beam, negative bending moment at the node and size of connecting concrete. From this research, we found that positive and negative bending moment depend on the size of connecting concrete which decide the sectional area of reinforcing bar.

경사 슬래브교의 지간/폭, 경사각에 따른 응력 상관성

남문희,정희효,이관희,이수경 慶尙大學校生産技術硏究所 1996 生産技術硏究所論文集 Vol.12 No.-

Skewed slab bridge have designed a width beam, stress of skewed slab bridge is quite different in according with skew and width /length. Especially in case that we analyse skewed slab bridge as a width beam, stress of right angle direction against axis of bridge is not analysed. In this study we will present the stress of transverse axis to longitudinal axis of bridge according to skew and width/length.

하천제방 根固工크기에 관한 실험연구

文秀男,申文燮 群山大學校 1996 論文集 Vol.23 No.-

An experimental study on straight channel that belongs to steep slope at medium and upper stream solved tractive force from real gauged stage and velocity by hydraulic modeling test. And inducing genearlized Cross Type Flat Concrete Block Foot Protection Work Size in scouring point. The objectives of this experimental study is to provide Foot Protection Work Size for the sake of effective uses for the bank stabilization. And use for data of channel improvement some anticipated scale of foot protection work and so on.

자기회귀 모델을 이용한 팔운동 근전신호의 기능분리

南文鉉,金正鉉,金洛敎 建國大學校 附設 産業技術硏究所 1992 논문집 Vol.17 No.-

본 연구에서는 AR 모델을 이용한 인간의 팔운동 근전신호의 기능분리에 관한 방법을 제시하였다. 4가지 기능의 팔운동 시에 근전신호의 특성을 잘 나타낼수 있는 매개변수를 공분산범과 연속적 최소제곱 알고리즘을 이용하여 각 기능에 대한 모델의 매개변수와 적정차수를 결정하였다. 또한 팔 기능을 분류하기 위한 신뢰구간은 총합제곱오차의 평균과 표준차로 결정하였다. AR 모델의 오차를 이용하여 각 운동에 대한 기능분리를 실행한 결과 차수가 4차일 때 가장 높은 인식률을 얻을 수 있었으며, 차수가 증가할수록 인식률은 감소하였다. 따라서 본 연구의 결과는 의용생체공학이나 재활공학에 응용할 수 있으리라 기대한다. In this thesis, general method using autoregressive model in the functional separation of the myoelectric signal of human arm movements are suggested. Covariance method and sequential least squares algorithm were used to determine the model parameters and the order of signal model to describe four arm movement patterns; the forearm flexion and extension, the wrist pronation and supination. The confidence interval to classify the functions of arm movement was defined by the mean and standard deviation of total squares error. With the error signals of autoregressive(AR) model, the result showed that the highest success tate was obtained in the case of 4th order, and success rate was decreased with increase of order. This technique might be applied to biomedical-and rehabilitation-engineering.