보리등겨로 제조한 간장의 향기성분

권오준,이은정,최웅규,손동화,이석일,정연건,지원대 한국위생과학회 2002 한국위생과학회지 Vol.8 No.2

새로운 장류제품으로서 보리등겨의 이용방안을 모색하기 위하여 간장을 만들어 연구하였다. 보리로 제조한 간장의 갈색화는 점차적으로 증가 하였으며 완만한 변화를 보였다. 향기성분으로는 4-vinyl-2-methoxy-phenol, benzeneacetaldehyde, palmitic acid, 2-furancatboxaldehyde, methyl-9, 12-octadecadienoate, di-(2-ethylhexyl)phthalate, diethyl phtalate, dibytyl-1,2-benzenedicatboxylate, 5-methyl-2-furancarboxaldehyde, 3,4-dimethyl-1h-pyrazole, phenylethyl alcohol, dioctyl-hexanedioate, dimethyl-1,2-benzenedicatboxylate, benzaldehyde, methional, 2-methoxy-phenol, n-furfurylidene-3-methylbutyl amine, 1-furfuryl-2-formyl pyrrole, tetradrcanoic acid, 5-methyl-pyrimidine, 4-methyl-5-hydroxymethyl-imidazole, maltol, 5-(5-methyl-2-furanyl)methyl-2-furancarboxaldehyde 순으로 높은 함량을 차지 하였다. For investigation of new utilization as jang-products, kanjang was prepared using barely bran. This study was conducted to investigate flavor components of kanjang during fermentation time. The optical density was gradually increased. Among the flavor components identified in kanjang made with barley bran, the contents of 4-viny1-2-methoxy-phenol was the most in quantity followed by benzeneacetaldehyde, palmitic acid, 2-furancarboxaldehyde, methyl-9,12-octadecadienoate, di-(2-ethylhexyl)phthalate, diethyl phtalate, dibutyl-1,2-benzendicarboxylate, 5-methyl-2-furancarboxaldehyde, 3,4-dimethyl-1h-pyrazole, phenylethyl alcohol, dioctyl-hexanedioate, dimethyl-1,2-benzenedicarboxylate, benzaldehyde, methional, 2-methoxy-phenol, n-furfurylidene-3-methylbutyl amine, 1-furfuryl-2-formyl pyrrole, tetradecanoic acid, 5-methyl-pyrimidine, 4-methyl-5-hydroxymethyl-imidazole, maltol and 5-(5-methyl-2-furanyl)methyl-2-furancarboxaldegyde.

유기마이크로파티클 시스템에의한 보류특성 변화

권진,이근수,이지훈,심지영,조병묵 한국공업화학회 2004 응용화학 Vol.8 No.1

Todays, papermaking is change to poor condition and importance of retention has been increased. Therefore microparticle system has been developed and used very widly which provides the retention mechanism by cationic polymer and high charged micoparticle. In this study, we compared the retention efficiency of traditional microparticle(bentonite) and organic microparticle.

일부 자동차 공장 근로자들의 職業的 特性과 社會 心理的 Stress의 相關性 硏究

김성삼,홍지우,한현정,최희석,권소희,정해경,김삼태,송용선,이기남 한국전통의학연구소 2004 한국전통의학지 Vol.14 No.1

〈Objective〉 This study were carried out to study to assess the relationship between job characteristics, general characteristics, health behaviors, and psychosocial distress and suggested the preventive oriental medicine approaches in occupational health area. 〈Methods〉 We measured job characteristics(job demand, job control, jop insecurity) by The Karasek's Job Content Questionnaire, health behaviors(smoking, drinking, exercise, coffee), general characteristics at work by a self-administered questionnaire. Psycho social distress was measured by PWI(Psychosocial Well-being Index), a 18-item self- administered instrument. 370 data for research were collected through the process of oriental health examination with questionnaire in workplace. Statistical analysis was done by t test, oneway ANOVA, and hierarchical multiple regression analysis with SPSSWIN (version 10.0) 〈Results〉 Among the 152 respondents, the prevalence of high job strain was 27%(41 persons). The Odds ratio of high job strain was 3.11(95 2.12~4.11), and those of passive group and active group were 2.01(95 0.83~2.76) and 1.80(95 0.83~2.76), respectively. Our results supported the association between psychosocial distress and job strain. 〈Conclusion〉 The odds ratio of high strain isolated group(high strain group+low social support) was 3.59(95 2.05 5.13), but the odds ratio of high strain collective group was 1.32(95 0.23 2.41). Social support at work was modifing factor of the association between psycho social distress and job strain. Therefore we reviewed the evidence that economic depression was associated with psycho social distress in this study, and that the strength of the social support was important in maintain health.

THE DIMENSIONAL CHANGE OF CAST IMPLANT BARS AFTER LABORATORY PROCEDURE

Kwon, Ji-Yung,Kim, Chang-Whe,Lim, Young-Jun,Kim, Myung-Joo The Korean Academy of Prosthodonitics 2007 대한치과보철학회지 Vol.45 No.3

Statement of Problems. The precision of fit between the bearing surfaces of implant abutments and the prosthesis framework has been considered fundamental to implant prosthodontic protocol. Purpose. The study aimed to investigate the effect of laboratory procedure on the dimensional accuracy of cast implant bars. Material and methods Thirty implant bars were fabricated on a metal master model. The gap distances were measured at the right implant abutment replica-gold cylinder interface after casting procedure. The bar length data of precasting and postcasting state were collected and analyzed. Results. The mean gap distance found after casting was $106.3{\mu}m$ for buccal side, $122.1{\mu}m$ for distal side and $117.1{\mu}m$ for the lingual side. The mean bar length was $17964.7{\mu}m$ at precasting measurement, $17891.6{\mu}m$ at postcasting measurement. The mean change of bar length was $-73.1{\mu}m$. Conclusion. Even though the techniques used in this study strictly followed the guidelines established in the literature, the 30 cast implant bars evaluated all yielded gap distances that were beyond acceptable accuracy. There was a statistically significant difference between precasting and postcasting bar length (P<0.01). There was a decreasing tendency in bar length after casting procedure. It was necessary to correct this dimensional change from laboratory procedure by some corrective methods.

Assessing changes of peri-implant bone using digital subtraction radiography

Kwon Ji-Yung,Kim Yung-Soo,Kim Chang-Whe The Korean Academy of Prosthodonitics 2001 대한치과보철학회지 Vol.39 No.3

Digital subtraction radiography may be one of the most precise and noninvasive methods for assessing subtle density changes in peri-implant bone, providing additional diagnostic information on implant tissue integration in overall maintenance. The aims of this study were to evaluate density changes after first, second surgery of dental implant and to measure the amount of marginal bone loss 9 months after second surgery using digital subtraction radiography. Bone change around 30 screw-shaped implants in 16 patients were assessed on radiographs. 17 Branemark implants of 3.75mm in diameter(Nobel Biocare, Goteborg, Sweden), 2 Branemark implants of 5.0mm in diameter, 11 $Replace^{TM}$ implants of 4.3mm in diameter(Nobel Biocare, Goteborg, Sweden) were used. To standardize the projection geometry of serial radiographs of implants, customized bite block was fabricated using XCP film holder(Rinn Corporation, Elgin, IL.) with polyether impression material of Impregum(ESPE, Germany) and direct digital image was obtained. Qualitative and quantitative changes on radiographs were measured with Emago software(The Oral Diagnostic System, Amsterdam, Netherlands). The results were as follows: 1. The peri-implant bone density of 69.2% implants did not change and the peri-implant bone density of 30.8% implants decreased after 3 months following first surgery. 2. The crestal bone density of 53.9% implants decreased first 3 months after second surgery. The crestal bone density of 58.8% implants increased 9 months after second surgery. No density change was observed around the midportion of the implants after second surgery, 3. The amount of marginal bone loss between different kinds of implants showed no statistically significant differences (p>0.05). 4. More than 90% of total marginal bone loss recorded in a 9-month period occurred during the first 3 months.

Three-dimensional accuracy of different correction methods for cast implant bars

Kwon, Ji-Yung,Kim, Chang-Whe,Lim, Young-Jun,Kwon, Ho-Beom,Kim, Myung-Joo The Korean Academy of Prosthodonitics 2014 The Journal of Advanced Prosthodontics Vol.6 No.1

PURPOSE. The aim of the present study was to evaluate the accuracy of three techniques for correction of cast implant bars. MATERIALS AND METHODS. Thirty cast implant bars were fabricated on a metal master model. All cast implant bars were sectioned at 5 mm from the left gold cylinder using a disk of 0.3 mm thickness, and then each group of ten specimens was corrected by gas-air torch soldering, laser welding, and additional casting technique. Three dimensional evaluation including horizontal, vertical, and twisting measurements was based on measurement and comparison of (1) gap distances of the right abutment replica-gold cylinder interface at buccal, distal, lingual side, (2) changes of bar length, and (3) axis angle changes of the right gold cylinders at the step of the post-correction measurements on the three groups with a contact and non-contact coordinate measuring machine. One-way analysis of variance (ANOVA) and paired t-test were performed at the significance level of 5%. RESULTS. Gap distances of the cast implant bars after correction procedure showed no statistically significant difference among groups. Changes in bar length between pre-casting and post-correction measurement were statistically significance among groups. Axis angle changes of the right gold cylinders were not statistically significance among groups. CONCLUSION. There was no statistical significance among three techniques in horizontal, vertical and axial errors. But, gas-air torch soldering technique showed the most consistent and accurate trend in the correction of implant bar error. However, Laser welding technique, showed a large mean and standard deviation in vertical and twisting measurement and might be technique-sensitive method.

Three-dimensional accuracy of different correction methods for cast implant bars

Ji-Yung Kwon,Chang-Whe Kim,Young-Jun Lim,Ho-Beom Kwon,Myung-Joo Kim 대한치과보철학회 2014 The Journal of Advanced Prosthodontics Vol.6 No.1

PURPOSE. The aim of the present study was to evaluate the accuracy of three techniques for correction of cast implant bars. MATERIALS AND METHODS. Thirty cast implant bars were fabricated on a metal master model. All cast implant bars were sectioned at 5 mm from the left gold cylinder using a disk of 0.3 mm thickness, and then each group of ten specimens was corrected by gas-air torch soldering, laser welding, and additional casting technique. Three dimensional evaluation including horizontal, vertical, and twisting measurements was based on measurement and comparison of (1) gap distances of the right abutment replica-gold cylinder interface at buccal, distal, lingual side, (2) changes of bar length, and (3) axis angle changes of the right gold cylinders at the step of the post-correction measurements on the three groups with a contact and non-contact coordinate measuring machine. One-way analysis of variance (ANOVA) and paired t-test were performed at the significance level of 5%. RESULTS. Gap distances of the cast implant bars after correction procedure showed no statistically significant difference among groups. Changes in bar length between pre-casting and post-correction measurement were statistically significance among groups. Axis angle changes of the right gold cylinders were not statistically significance among groups. CONCLUSION. There was no statistical significance among three techniques in horizontal, vertical and axial errors. But, gas-air torch soldering technique showed the most consistent and accurate trend in the correction of implant bar error. However, Laser welding technique, showed a large mean and standard deviation in vertical and twisting measurement and might be technique-sensitive method.

Restoration of Mandibular Edentulous Patient By Dental Implant: Case Report

Kwon, Ji-Yung,Kim, Yung-Soo The Korean Academy of Prosthodonitics 2000 대한치과보철학회지 Vol.38 No.3

The completely edentulous patient has few treatment options in conventional dentistry. When implants are considered, treatment plans range from a 2-implant overdenture to a completely implant-supported prosthesis. Fixed prosthesis is often the preferred selection of the edentulous patient. fixed full-arch cert amo-metal restorations can be a predictable implant treatment modality for the edentulous patient. Implant-supported fixed prosthesis has several advantages: predictability, fixedness, retrievability, improved function, lower maintenance of prosthesis, long-term published success. Edentulous patients with a severely resorbed mandible often experience problems with their dentures. Treatment concepts involving two to four implants for the support of an overdenture have been proposed. There seems to be no need to insert more than two endosteal implants to support an overdenture, however, long-term prospective studies are needed to support this notion. Using short endosseous implants and an overdenture in the extremely resorbed mandible is a justified treatment option because of the relative simplicity and low morbidity of this treatment strategy. Implant-supported overdenture has several advantages: Cost, retrievability, hygiene access, profile and contour control, increased retention and stability, implant installed in a predicted region(ant. mandible).

The Dependence of SiON/Si Interface Characteristic on Depositions Conditions Using Laser CVD

Yung-Kwon Sung,Ji-Ho Ryoo,Jong-Kwan Kim,Eu-Gine Chu 대한전기학회 1995 Journal of KIEE Vol.8 No.2

Tenofovir Alone vs Tenofovir and Entecavir Combination in Adefovir-resistant Patients with Chronic-hepatitis B Virus Infection

Ji Hoon Kim,Kwan Soo Byun,Byung Chul Yoo,So Young Kwon,Yoon Jun Kim,Jihyun An,Han Chu Lee,Yung Sang Lee,Young-Suk Lim 한국간담췌외과학회 2014 한국간담췌외과학회 학술대회지 Vol.2014 No.4