특성화고등학교 학생들의 과학 수업에서의 흥미에 관한 내러티브 연구: 전공 교과목과의 비교를 중심으로

장준규 ( Jun-kyu Chang ),이준기 ( Jun-ki Lee ) 전북대학교 과학교육연구소 2023 과학과 과학교육 논문지 Vol.48 No.1

이 연구는 특성화 고등학교에 입학한 학생 4명의 자발적 참여를 통해 이루어 졌다. 이 연구 대상자들이 어떠한 부분에서 과학에 대한 흥미를 경험했고, 무엇이 과학에 대한 흥미를 잃게 되었는지에 대해 연구 참여자들의 관점에서 확인하고 분석하고자 내러티브 탐구 방법을 통해 깊이 있는 면담을 진행했다. 이 연구의 목적은 특성화 고등학교 학생들이 과학에 흥미를 잃게 하는 다양한 요인들을 파악하는데 있다. 본 연구의 주요 결론을 제시하면 다음과 같다. 첫째, 연구 참여 학생들은 초 · 중학교시기에 연구 참여 학생들은 과학에 대한 흥미를 어느 정도 가지고 있었지만 특성화 고등학교에 입학 후 잃게 되었다. 둘째, 학생들이 과학교과에 흥미를 느낄 수 있게 해주는 환경이 조성되지 못했다. 결론을 종합하면 연구 참여 학생들은 과학교과에 대한 필요성을 인지하고 있음에도 불구하고, 과학교과에 대한 흥미를 느끼지 못해 수업에 집중할 수 없었다. 또한 연구 참여학생들의 과학교과는 일관적인 이론수업으로 진행되었고, 그 과정에서 학생들의 이해도는 고려되지 않았다. 결국 학생들은 과학교과에 대해 어려움을 느꼈고 흥미를 잃게 되었다. This study was conducted through the voluntary participation of four students who entered a vocational high school. The purpose of this research was to identify various factors that cause students at vocational high schools to lose interest in science, by examining and analyzing from the perspectives of the research participants which parts of science they experienced an interest in and what caused them to lose interest. In-depth interviews were conducted using narrative inquiry method. The main findings of this study are as follows. First, the participating students had some interest in science during their elementary and middle school years, but lost it after entering the vocational high school. Second, the environment that allows students to develop an interest in science was not provided. In conclusion, although the participating students were aware of the importance of science, they could not focus on class because they did not have an interest in science. In addition, their science classes consisted of consistent theoretical lessons, without considering the students' level of understanding. As a result, the students found science classes difficult and lost interest.

고요산혈증의 위험인자 : 아산시 지역 주민을 대상으로

김용배,장원기,황보영,김화성,안규동,이병국,이용진,이종은,이준숙,이찬구,이한정,이성수 순천향대학교 2006 Journal of Soonchunhyang Medical Science Vol.12 No.1

Objective : Serum uric acid has now been identified as a marker for a number of metabolic and hemodynamic abnormalities. The aim of this study is to evaluate risk factors which influence hyperuricemia in the citizens of Asan. Method : The study design was cross-sectional and research subjects were 1086 citizens of Asan. General characteristics, cigarette smoking, alcohol consumption, and past history were obtained by interview using a structural questionnaire. Also, we measured height, weight and blood pressure, and serum uric acid of the subjects. Results : The mean serum uric acid level was 5.27 ㎎/㎗ in men and 4.01 ㎎/㎗, in women, In the multiple logistic regression analysis, statically significant risk factors of hyperuhcemia were gender, body mass index, blood lead concentration, and serum creatinine. Conclusion : Our results suggest that gender, body mass index, blood lead concentration, and serum creatinine might be the most important risk factors of hyperurcemia. Education program as well as routine check-up for serum uric acid was highly recommended for the effective prevention of hyperuricemia.

Effect of Impact Velocity on Interface Characteristics of HT‑9 Steel Joints Fabricated by Magnetic Pulse Welding

Jun‑Woo Song,Jin‑Ju Park,Gyoung‑Ja Lee,Min‑Ku Lee,Kyu‑Hyun Park,Soon‑Jik Hong,Jung Gu Lee 대한금속·재료학회 2020 METALS AND MATERIALS International Vol.26 No.3

The weldability window in magnetic pulse welding (MPW) is proposed for the end-closure joining of HT-9 steel tubularworkpieces. Based on both theoretical and experimental investigations, the impact velocity of the flyer tube at the momentof collision had a dominant effect on the bonding characteristics of the resultant joints and the optimal impact velocity wasestimated to be in the range of 265–290 m/s in this alloy system. Under the optimal process conditions, no leak was detectedduring helium leak testing. Moreover, the integrity of the joint interface was preserved until the tube section ruptured duringinternal pressure burst testing. For HT-9 steel, the ductile δ-ferrite phase produced by the localized interfacial melting duringMPW acted as an effective obstacle to crack propagation, thereby enhancing the fracture resistance of the joint interface. Allof the results demonstrated the high integrity and durability of the HT-9 steel tube assembly fabricated by the MPW process.

Gene pyramiding effect of two major bakanae disease resistance gene using qBK1 and qBKWD

Sais-Beul Lee,Tae-Heon Kim,Su-Min Jo,Jun-Hyun Cho,Ji-Yoon Lee,Jong-Hee Lee2,Dongjin Shin,You-Chun Song,Myung-Kyu Oh,Dong-Soo Park 한국작물학회 2017 한국작물학회 학술발표대회 논문집 Vol.2017 No.-

화학적 요부 교감신경절 차단에서 한 분절 차단과 두 분절 차단의 비교

김종일,이규종,이상곤,민병우,반종석,문철준 대한마취과학회 2001 Korean Journal of Anesthesiology Vol.41 No.4

Chemical Lumbar Sympathetic Block: Comparison of One- Versus Two-needle Techniques Chul-Jun Mun, M.D., Kyu-Jong Lee, M.D., Sang-Gon Lee, M.D., Jong-Il Kim, M.D.^* Jong-Suk Ban, M.D., and Byung-Woo Min, M.D. Department of Anesthesiology, Fatima Hospital, Daegu, Korea ^*Kim Jong Il Pain Clinic, Daegu, Korea Background: It was frequently noticed in the course of performing a two-needle sympathectomy, that satisfactory spread of contrast solution could be produced by injection through only one of the needles. This led to a closer examination of the merits of single-needle technique. Methods: Forty patients were randomized into two groups. Patients in the single-needle group (n = 20) were injected at the second or third lumbar sympathetic ganglia, while patients in the two-needle group (n = 20) were injected at the second and thired lumbar sympathetic ganglia. Lumbar sympathetic blocks were performed using 3 ml of alcohol and the spread of injectate was verified with C-arm fluoroscopy. The indicators of a successful sympathetic block are increasing skin temperature, decreasing pain, and anhidrosis in the distal extremity. Results: The duration of anhidrosis was 12.2 ?? 2.6 months (mean ?? SD) in the single-needle group versus 13.6 ?? 3.6 months (mean << SD) in the two-needle group. Conclusions: As these results were not significantly different from those obtained in patients having considered to be effective for a neurolytic ;i,bar sympathectomy. (korean J Anesthesiol 2001; 41: 439~443)

한국 정신장애의 역학 조사 연구[I] : 각 정신장애의 유병률

조맹제,함봉진,김장규,박강규,정은기,서동우,김선욱,조성진,이준영,홍진표,최용성,박종익,이동우,이기철,배재남,신정호,정인원,박종한,배안,이충경 大韓神經精神醫學會 2004 신경정신의학 Vol.43 No.4

Objectives : This study aims to estimate the prevalence of the DSM-IV psychiatric disorders in Korean population using the Korean version of Composite International Diagnostic Interview (K-CIDI). Methods : Subjects were selected by taking multi-stage, cluster samples of 7,867 adult household residents, 18 to 64 years of age, in ten catchment areas. Total 78 trained interviewers administered the K-CIDI to the selected respondents, from June 1 to November30,2001. Results : Total 6,275 respondents completed the interview. Some 33.5% of respondents reported at least one lifetime disorder, 20.6% reported at least one-year disorder, and 16.7% reported at least one-month disorder. The most common lifetime disorders were alcohol abuse/dependence (17.24%), nicotine dependence/withdrawal (11.19%), specific phobia (5.16%), and major de-pressive disorder (4.25%). The lifetime prevalence of substance abuse/dependence (0.25%) and schizophrenia (0.16%) was very low. Nicotine and alcohol use disorder showed very high male/female ratio. Mood disorder and anxiety disorder were more prevalent among female than male. Conclusion : The prevalence of psychiatric disorders was high. In comparison with other studies, remarkable differences in distributions of psychiatric disorders across the areas and times were observed.

요배부 수술 실패 증후군에서 자기공명영상의 이용

이준규,안재성,권순태,김환정,정제택 충남대학교 의과대학 지역사회의학연구소 1997 충남의대잡지 Vol.24 No.2

This study was compared pre-operative MRI finding with operative finding on 36 cases with the failed back surgery syndrome (FBSS) retrospectively. The purpose of this study was to determine the accuracy of the MRI on the FBSS including early complications such as hematoma of infection. Of the 51 patients with FBSS, we analyzed pre-operative MRI finding compared with operative finding on 36 cases excluding nonunion, instability, metal failure and pseudoarthrosis who underwent an operation for the FBSS from December 1994 to June 1997. There were 25 men (69.4%) and 11 women (30.6%), aged from 16 to 68 years (average 43.6 years). These were divided into 5 sub-groups and calculated sensitivity, specificity and positive predictability. MRI accuracy in recurred disc was 84%, scar adhesion, recurred or developed stenosis, infection and hematoma 100% each and all, overall accuracy of the MRI 93%, respectively. Average interval of re-operation in FBSS WAS 4.3 years. In the 18 cases (50%), symptoms persist without pain-free interval after first operation. Early complications including hematoma and infection are easily detected with MRI. Especially if patient complains of severe leg pain or neurologic deficit, it is a good diagnostic procedure to check the MRI. The MRI is a useful method for evaluation of most cases of the FBSS, but it has limitations to evaluate recurred disc or scar adhesion only in T1, T2 weighted image. Therefore Gd-DTPA enhancement is necessary for the accurate diagnosis.

BaTiO_3결정의 사각형 강유전 구역에 관한 온도와 전기장 특성

이찬구,이수대,문준규 慶南大學校 附設 工業技術硏究所 2003 硏究論文集 Vol.21 No.2

BaTiO_3 결정의 (100)면에 수직한 방향에서 관측되는 강유전 구역을 온도와 전기장의 변화에 따라 편광현미경으로 관측하였다. BaTiO_3 결정의 (100)면에 수직한 방향에서 관측되는 그물모양의 사각형 강유전 구역이 90℃-구역이라는 사실을 밝혔다 우리는 사각형 강유전 구역의 온도특성과 정전기장 특성에 관하여 조사하였다 사각형 강유전 구역은 상전이 온도인 120℃ 이상에서 사라졌다. 24℃에서 외부 전기장을 인가한 경우, 4 0×10^7 V/m에서 구역의 변화가 관측되며, 5.5×10^7 V/m의 전기장을 가하여도 단일 강유전 구역은 형성되지 않으며, 5.5×10^7 V/m 이상에서는 누설전류가 흘렀다. 한편 온도를 114℃로 올리고 전기장을 5 5×10^7 V/m 이상으로 가하면 단일 강유전 구역이 형성되었다. We observed the ferroelectric domain in a vertical direction of the (100) plane of BaTiO_3 crystal by a polarizing microscope We find out that ferroelectric domains of the square pattern are 90℃0domain. The electric field Properties and the temperature dependent of ferroelectric domain in BaTiO_3 Crystal was investigated From these results, it was concluded that the square domains disappeared from sight at above 120℃, and the Change of the domain pattern observed at 24℃ and 4.0×10^7V/m, it Showed the leakage current 5.5×10^7 V/m. A single domain do not formed 24℃ and above 5.5×10^7 V/m. On the other hand, a single domain formed at 114℃and above 5.5×10^7 V/m.

Halogen lamp 광조사기와 Plasma xenon arc lamp 광조사기에 의한 광중합 복합레진의 중합률 비교

이영준,최남기,양규호 전남대학교 치의학연구소 2002 구강과학 Vol.14 No.4

Light-cured composite resin that is widely employed in esthetic restorative dentistry shows different degree of polymerization according to chemical composition of resin product, intensity and exposure time of curing unit, method of filling etc. Light cured composite resin is required of multi-layered curing with proper thickness to minimize the problems like insufficient polymerization or polymerization shrinkage. However, it brings the increment of total chair time. Recently. new light curing unit utilizing the plasma xenon arc lamp is introduced. This curing unit is operated at relatively high intensity so shortening the curing time signifiantly. The aim of this experiment was to estimate curing capability of plasma xenon arc lamp curing unit compared to traditional halogen lamp curing unit. Resin specimens were prepared in aluminum mold with diameter of 7mm and thickness of 1mm, 2mm, 3mm. Degree of polymerization was evaluated by Raman spectroscopy after irradiation of specimens with halogen lamp curing unit(Optilux 15O, Demetron, USA) for 20s, 40s. 60s and plasma xenon arc lamp curing unit(flipo, Lokki. Francr) for 2s, 3s, 6s. The following results are obtained. 1. The light intensity was 472mW/cm^2 in halogen lamp curing unit (Optilux 150. Demetron, USA) and 1945mW/cm^2 in plasma xenon arc lamp curing unit (flipo, Lokki, France) In both curing units, the range of wavelength was between 370 and 520nm and showed peak intensity at about 470nm. 2. The degree of conversion at exposured surface was increased significantly with increment of exposure time in both curing unit(p<0.01). Overall degree of conversion was higher in halogen lamp curing unit when compared to plasma xenon arc lamp curing unit, but there was no significant difference. 3. In both curing unit, the degree of conversion at bottom surface was decreased significantly according to an increase in thickness(p<0.05). In thickness of 3mm cured with plasma xenon arc lamp curing unit, the degree of conversion showed decreased values significantly compared to thickness of 1,2mm(p<0.01). 4. In halogen lamp curing unit, the degree of conversion increased in all thickness as exposure time increased, but there was no significant difference in 1.2mm thickness. Plasma xenon arc lamp curing unit showed significantly increased degree of conversion as increase of exposure time in all thickness (p<0.01). From the above results, it was concluded that strong light intensity of plasma xenon arc lamp curing unit did not compensate for short exposure time completely. So. Multi-layered curing within 2mm thickness and additional exposure time Is recommanded when light-cured cpmposite resin is polymerized with plasma xenon arc lamp curing unit.

교잡종 찰옥수수에 대한 연구 : Ⅱ. 새로 육성된 찰옥수수 교잡종 "대덕찰"에 대한 농업적 특성 Ⅱ. Agronomic Characteristics of the New Waxy Hybrids "Daedukchals"

이희봉,김효기,김동욱,김준표,정재영,최현구,강윤규 충남대학교 농업과학연구소 2002 농업과학연구 Vol.29 No.2

1. 새로 육성된 4개의 대덕찰 찰옥수수 교잡종에 대한 간장은 대조구인 찰옥 1호보다 큰 반면에 개화기는 약 4∼7일 늦었으며, 모든 공시 교잡종의 주당 분얼수는 한 개이하의 무효분얼로 나타났다. 2. 새로 육성된 대덕찰옥수수의 이삭길이와 직경은 대조구인 찰옥 1호보다 크게 나타났으며, 특히 대덕찰옥수수 1호와 2호의 과피두께는 대구조보다 얇았고, 당도 역시 높게 나타나 우수 교잡종으로 평가되었다. Stem height of the new developed "Daedekchals" waxy hybrids were higher than check hybrid. Chalok #1, while days to tasseling were delayed about four to seven days. Number of tillers per plant of the these new hybrids including check were appeared to be one less as non-effective tiller. Ear length and diameter of the new waxy hybrids were longer and thicker than check, respectively. In addition pericarp thickness of the Daedekchal #1 and #2 among new developed waxy hybrids were thinner and sugar content were higher than check.