고압 커패시터의 고장 분석을 통한 신뢰도 예측

양석준,김진우,신승우,이희진,신승훈,유동수,장석원 한국비파괴검사학회 2001 한국비파괴검사학회지 Vol.21 No.6

본 논문은 고압 커패시터의 고장분석과 신뢰성 예측 결과를 다루고 있다. 부품의 수명과 고장률을 예측하기 위해서 두 가지 방법으로 고장 모드와 고장 메커니즘을 연구하였다. 에폭시 수지로 성형된 고압 커패시터가 절연내압 시험 하에서 저항이 제로로 되는 고장에 대하여, 근본원인 고장분석 체계를 효과적으로 수립함으로써 고장 메커니즘의 원인을 분석하였다. 특히 세라믹-에폭시 계면에서의 절연파괴 고장 현상이 강조되었으며, 본 연구에서 얻어진 결과의 타당성은 마그네트론에 장착된 고압 커패시터의 열사이클 시험 수행에 의한 가속시험 결과로부터 입증되었다. 시험 결과들은 결함이 있는 로트를 신속히 규명하고 B10수명을 결정하는데 유용하게 사용할 수 있다. 또한, 유전체의 절연파괴에 대해서 부하-강도 간섭모델을 이용하여 고장률을 예측하였다. This paper presents a result of failure analysis and reliability evaluation for high voltage ceramic capacitors. The failure modes and failure mechanisms were studied in two ways in order to estimate component life and failure rate. The causes of failure mechanisms for zero resistance phenomena under withstanding voltage test in high voltage ceramic capacitors molded by epoxy resin were studied y establishing an effective root cause failure analysis. Particular emphasis was placed on breakdown phenomena at the ceramic-epoxy interface. The validity of the results in this study was confirmed by the results of accelerated testing. Thermal cycling test for high voltage ceramic capacitor mounted on a magnetron were implemented. Delamination between ceramic and epoxy, which might cause electrical short in underlying circuitry, can occur during curing or thermal cycle. The results can be conveniently used to quickly identify defective lots, determine B10 life estimation each lot at the level of inspection, and detect major changes in the vendors processes. Also, thd condition for dielectric breakdown was investigated for the estimation of failure rate with load-strength interference model.

한국 정신장애의 역학 조사 연구[I] : 각 정신장애의 유병률

조맹제,함봉진,김장규,박강규,정은기,서동우,김선욱,조성진,이준영,홍진표,최용성,박종익,이동우,이기철,배재남,신정호,정인원,박종한,배안,이충경 大韓神經精神醫學會 2004 신경정신의학 Vol.43 No.4

Objectives : This study aims to estimate the prevalence of the DSM-IV psychiatric disorders in Korean population using the Korean version of Composite International Diagnostic Interview (K-CIDI). Methods : Subjects were selected by taking multi-stage, cluster samples of 7,867 adult household residents, 18 to 64 years of age, in ten catchment areas. Total 78 trained interviewers administered the K-CIDI to the selected respondents, from June 1 to November30,2001. Results : Total 6,275 respondents completed the interview. Some 33.5% of respondents reported at least one lifetime disorder, 20.6% reported at least one-year disorder, and 16.7% reported at least one-month disorder. The most common lifetime disorders were alcohol abuse/dependence (17.24%), nicotine dependence/withdrawal (11.19%), specific phobia (5.16%), and major de-pressive disorder (4.25%). The lifetime prevalence of substance abuse/dependence (0.25%) and schizophrenia (0.16%) was very low. Nicotine and alcohol use disorder showed very high male/female ratio. Mood disorder and anxiety disorder were more prevalent among female than male. Conclusion : The prevalence of psychiatric disorders was high. In comparison with other studies, remarkable differences in distributions of psychiatric disorders across the areas and times were observed.

광원에 따른 중합광의 복합레진 중합 능력 비교

신혜진,김진우,조경모 大韓齒科保存學會 2003 Restorative Dentistry & Endodontics Vol.28 No.2

The purpose of this study is to evaluate the polymerization ability of three different light sources by microhardness test. Stainless steel molds of 1, 2, 3, 4 and 5 mm in thickness of 7 mm in diameter were prepared. The hybrid composite Z100 was packed into the hole of the mold and curing light was activated for designated time. Three different light sources, conventional halogen, light emitting diode, and plasma arc, were used for curing of composite. Two different curing times applied; one is to follow the manufacturers recommendation and the other is to extend the curing time of LED and plasma arc for balancing the light energy with halogen. Immediately after curing, the Vickers hardness was measured at the bottom of specimen. The results were as follows. 1. The composite cured with LED showed equal to higher microhardness than halogen. 2. The composite was cured with plasma arc by manufacturers recommendation showed lowest microhardness at all thickness. However, when curing time was extended, microhardness was higher than the others. In conclusion, this study suggested that plasma arc needs properly extended curing time.

하악 매복 지치의 외과적 발거시 Methylprednisolone의 안면 부종 감소 효과에 대한 임상적 연구

신지훈,박진배,한지용,윤혜경,김우형,이희철 인제대학교 백병원 2002 仁濟醫學 Vol.23 No.4

Objective : The third molars, expecially mandibular wisdom teeth, are commonly obliquely impacted, and surgical procedure with odontomy and osteotomy is necessary for their extraction. The surgical extracion of impacted wisdom teeth occasionally in duces variable discomfort. Especially, postoperative swelling, pain and limitation of mouth opening determine the degree of discomfort. For the reduction of these complicaions, drug therapy(antihistamine, enzyme, steroid), cole pack and pressure technique have been studied. It is known that the steroids are the most effective. Methods and Meterial : We selected fifty patients in their twenties, who visited Department of Dentistry, Pusan Paik Hospital from March to August in 1998. All of 50 patients has no other medical problems. Total 50 patients were randomly divided to 30 of experimental group and 20 of control group. The experimental group had orally administration of methyprednisolone 5㎎ every 8 hours 2 times preoperatively and 7 times postoperatively. Five points were marked on the patients' face, and the distances between the points were measured just before operation and 48 hours after operation. Results : Methyprednisolone reduces swelling about 50% after surgical extraction of obliquely impacted mandibular third molars with osteotomy and odontomy. The difference in the amount of tissue edema between experimental and control group was significant(p<0.01). However, there was no significant difference according to the operation time. Conclusion : It seems that the use of methylprednisolone is effective to reduce postoperative swelling following surgical extraction of third molars.

음성 인식 헬스케어 시스템

신진우,조우승,조성빈,김재훈,정지은,사예지,백경동,박동규 순천향대학교 부설 산업기술연구소 2021 순천향 산업기술연구소논문집 Vol.27 No.2

As modern people's interest in health grows, wearable healthcare-related technologies that can collect biometric information and receive health-related services regardless of time and place are developing. This paper proposes the healthcare system based on voice recognition function. Unlike conventional wearable healthcare systems, the proposed system provides real-time telemedicine and diagnosis and the direct connection with doctors is possible through it. And almost all functions of the application in it are operated with voice commands to lower user access barriers. Because it deals with personal information including medical information, encryption algorithms have been applied between all data movements. Finally, the healthcare system proposed in this paper is expected to increase convenience in health care and reduce the medical gap.

수종의 자가 접착 레진 시멘트의 물성 및 lithium disilicate ceramic과 상아질에 대한 전단결합강도 비교

신혜진,송창규,박세희,김진우,조경모 大韓齒科保存學會 2009 Restorative Dentistry & Endodontics Vol.34 No.3

본 연구의 목적은 치면 처리와 수복물 내면의 처리가 필요 없는 자가 접착 레진 시멘트의 물성 및 lithium disilicate ceramic과 상아질에 대한 전단결합강도를 측정하고 기존의 레진 시멘트와 비교하여 임상적 유용성을 알아보고자 하는 것이다. 실험군인 자가 접착 레진 시맨트로는 Rely-X Unicem, Embrace Wetbond, Maxcem, BisCem을, 대조군으로는 기존의 레진 시멘트인 Rely-X ARC, 수복용 복합레진인 Z-350을 사용하였다. 각 레진 시멘트의 물성 평가를 위하여 테플론 주형을 이용하여 시편을 제작하고 만능 시험기를 이용하여 압축강도, 간접인장강도, 굴곡강도를 측정하였다. IPS Empress 2 및 상아질 시편에 제조사의 지시대로 Rely-X ARC군과 Z-350군에만 전처리를 시행 후 각 시멘트를 접착하고 전단결합강도를 측정하였다. 실험 결과는 다음과 같았다. 1. 자가 접착 레진 시멘트인 Biscem이 가장 낮은 물리적 성질을 나타내었다 (P<0.05). 2. 자가 접착 레진 시멘트의 상아질 및 도재에 대한 전단결합강도는 기존의 레진 시멘트에 비해 유의성 있게 낮은 값을 나타내었다 (P<0.05). 이상의 결과로 볼 때 자가 접착 레진 시멘트는 기존의 레진 시멘트에 비해 물리적 성질 및 상아질과 lithium disilicate ceramic에 대한 전단결합강도가 떨어지는 것으로 사료된다. The purpose of this study was to evaluate the physical properties of different self-adhesive resin cements and their shear bond strength on dentin and lithium disilicate ceramic and compare these result with that of conventional resin cement. For this study, four self-adhesive resin cements (Rely-X Unicem, Embrace Wetbond, Mexcem, BisCem), one conventional resin cement (Rely-X ARC) and one restorative resin composite (Z-350) were used. In order to evaluate the physical properties, compressive strength, diametral tensile strength and flexural strenth were measured. To evaluate the shear bond strength on dentin, each cement was adhered to buccal dentinal surface of extracted human lower molars. Dentin bonding agent was applied after acid etching for groups of Rely-X ARC and Z-350. In order to evaluate the shear bond strength on ceramic, lithium disilicate glass ceramic (IPS Empress 2) disks were prepared. Only Rely-X ARC and Z-350 groups were pretreated with hydrofluoric acid and silane. And then each resin cement was adhered to ceramic surface in 2 mm diameter. Physical properties and shear bond strengths were measured using a universal testing machine. Results were as follows 1. BisCem showed the lowest compressive strength, diametral tensile strength and flexural strength. (P<0.05) 2. Self-adhesive resin cements showed significantly lower shear bond strength on the dentin and lithium disilicate ceramic than Rely-X ARC and Z-350 (P<0.05) In conclusion, self-adhesive resin cements represent the lower physical properties and shear bond strength than a conventional resin cement.

VHDL을 이용한 실시간 JPEG 인코더 설계

신인철,어진우,강호준 단국대학교 1997 論文集 Vol.31 No.-

Image compression techniques have been necessary to transfer and save a great amount of image data in an efficient way. Because the compression and decompression of image signal require the real time processing, various hardware implementation methods have been studied. In this paper we propose the algorithm which is parallel form of processing 2 dimensional 8*8 blocks simultaneously, so increase speeds. It outputs compressed bit sequences 8 clocks later for the input data synchronized to clocks. Proposed algorithm is designed using VHDL. Simulation and circuit synthesis has been performed by the Powerview CAD Tool on the SUN Sparc-10 workstation. Results shows that maximum operating frequency is up to 15㎒. The final schematic circuit and comparison of processing speed are shown.

矢狀分割骨切斷術에 依한 顎矯正術의 統計學的 硏究

辛曉根,陳宇政,李俊禮,金晤煥,李炫尙 大韓顎顔面成形再建外科學會 1997 Maxillofacial Plastic Reconstructive Surgery Vol.19 No.2

Recently, combined with social complexity, increment of medical demand and supply and the change of esthetic category, admission and operation of the patients of facial deformity have been changed with annual change. This study was conducted in the concept of helping the overall character of orthognathic surgery in future understood and being an important index in the establishment of better treatment course, through the patient, on whom was operated orthognathic surgery via sagittal split ramal osteotomy in our Dept. of Oral & Maxillofacial Surgery, Chonbuk National University Hospital from 1991. 1. 1 to 1995. 12. 31. The results were obtained as follows. 1. The ratio of male to female was 1 : 1.33 and the ages between 16 and 25 year was 73.6%, and the mean age was 20.4 years. 2. The ratio of setback amount between 6 to 15mm was 84.6% and the advancement amount between 1 to 10mm was 89% and the mean amount of movement was 9.0mm in setback, and 3.6mm in advancement. 3. After removal of maxillomandibular fixation(MMF), the distinction of sex was not statistically significant in ROM. 4. The ROM following methods of fixation was statistically significant in 3rd(P<0.05), 8th, and 12th week(each P<0.01), with faster rehabilitation in rigid fixation which had shorter MMF period. 5. The rehabilitation of ROM following the operation methods was statistically significant in 1st(P<0.05), 2nd, 3rd, 4th, 6th, 8th, and 12th week(each P<0.01) with faster rehabilitation in the case of SSRO than Lefort I / SSRO (Two jaw surgery). 6. The rehabilitation of ROM following directions of mandibular movement did not manifest a statistically significant difference in both setback and advancement.

GIS를 이용한 소매업종 상권 반경과 중심지 이동분석

신우진,정창무,이상경 한국부동산분석학회 2002 不動産學硏究 Vol.8 No.1

This paper assesses changing patterns of the commercial power of a region and leading sectors of the movement with radial ring-based analyses of 49 categories of retail services in Kangnam-gu, Seoul. The radius of trade market area(R), as the measure of commercial power of a location, is defined as a pre-defined radial distance from the store location. Moving patterns of the regional commercial power is analysed based on the peak of overlapping density of the retail trade area every year. Findings indicate that the centers have been differentiated from each other in the form of an orderly hierarchy of places, with particular retail services developing for lower-ordered places as they reach a threshold, and leading sectors of the movement are usually retail services favored by teenagers.

Plabo 발효원액(35종 야채)의 임상시험 결과

신우진,강락원,최병태,박동일 동의대학교 한의학연구소 2002 동의한의연구 Vol.6 No.-

1. Backgroud and Purpose I intented to be helpful to treat adult disease through a clinical study of effect of Palbo fermentation bulk. 2. Methods I studied 40 women of adipositas during 3 months from August. 2002 to July. November 2002. and then I analyzed level of examination after administration of Palbo fermentation bulk. 3. Results and Conclusion Palbo fermentation bulk was administered to 40 women of adipositas for 3 months. The results level of cholesterol, triglyceride and HDL-C significantly decreased after administration of Palbo fermentation bulk. And the results level of fat capacity, fat ratio and adipogenic digree significantly decreased after administratiom of Palbo fermentation bulk