Tool을 이용한 요구 명세서 작성

신재선,이성주 조선대학교 기초과학연구소 1988 自然科學硏究 Vol.11 No.1

Jae Seon Shin Sung Joo Lee This thesis describes an approach to requirements specification in which different aspects of requirements specification are expressed using multiple models. This thesis also describes an interactive software tool named Model-Box, Which supports the construction and analysis of requirements models via textual and graphical representations. Model-Box allows users to define appropriate new models for the aspects they want to describe, without restriction to a single modeling methodology.

Photonic Crystals: Integration of Colloidal Photonic Crystals toward Miniaturized Spectrometers (Adv. Mater. 9/2010)

Kim, Shin-Hyun,Park, Hyo Sung,Choi, Jae Hoon,Shim, Jae Won,Yang, Seung-Man WILEY-VCH Verlag 2010 Advanced materials Vol.22 No.9

<B>Graphic Abstract</B> <P>The cover shows a schematic illustration of patterned colloidal photonic crystals with different bandgap positions. When an unknown light source impinges on the patterned photonic crystals, the light information can be identified from the reflection intensity profile of the constituent photonic crystals. The two optical microscopy images and background image display integrated photonic crystals with 20 different bandgaps spanning the entire visible range, and the SEM image shows the cross-section of the photonic crystal stripes, as reported by Shin-Hyun Kim, Seung-Man Yang, and co-workers on p. 946. <img src='wiley_img_2010/09359648-2010-22-9-ADMA201090022-content.gif' alt='wiley_img_2010/09359648-2010-22-9-ADMA201090022-content'> </P>

Low doses of ionizing radiation suppress doxorubicin-induced senescence-like phenotypes by activation of ERK1/2 and suppression of p38 kinase in MCF7 human breast cancer cells

신재식,우상혁,이형찬,홍승우,유두현,홍석일,이왕재,이명석,진영우,안성관,진동훈,박인철 Sookmyung Women's University Research Institute of 2010 여성과 건강 Vol.6 No.1

혈액 종양환자에서 Tobramycin의 임상약동학

신재국,신완균,장인진,신상구,김성민,배현주,최강원,김진규 대한화학요법학회 1990 대한화학요법학회지 Vol.8 No.1

항암화학요법을 받고 있던 중 감염으로 tobramycin을 투여받은 36명의 혈액종양 환자에서 tobramycin의 약동학적 특성을 비종양환자군에서의 population 값과 비교 검토하였다. 이들은 모두 정상 신기능을 가진 16세 이상의 성인남녀(21:15)백혈병 환자들이었다. 36명의 혈액종양 환자에서 산출된 tobramycin의 청소율 및 체내분포용적은 각각 120.3± 27.2ml/lg/hr 및 0.386± 0.11 L/㎏로 population 추정 치보다 유의하게 큰 값을 보였다.(P. <0.05).청소율과 체내분포용적을 해당 population 추정치로 나눈 비율치(ratio)의 평균값은 각각 1.47± 0.34 및 1.20± 0.34였다. 연령, hematocrit치, 혈청albumin치, 발열 및 항암화학요법기간과 tobramycin의 청소율 및 체내분포용적 사이에 유의한 상관관계는 발견할 수 없었다. 본 연구결과 혈액종양 환자에서 tobramycin 투여시는 적정혈장농도를 유지하기 위해 일반 환자군에 비해 용량의 증가 및 투여간격의 조정이 필요하며 지속적인 혈장농도 monitoring을 통하여 용법의 재적정화가 필요할 것으로 사료된다. The pharmacokinetics of tobramycin were evaluated in 36 hematologic malignancy patients undergoing anticancer chemotherapy and compared to the expected values from the population parameters. Total body clearance(mean : 12.3±27.2㎖/㎏/hr) and volume of distribution (mean : 0.386±0.11 L/㎏) in hematologic malignancy patients with normal renal function were significantly greater than those of estimated from population parameter distribution(P<0.05). The ratios of total body clearance and volume of distribution to the population estimates were 1.44±0.37 and 1.20±.034, respectively. No relationships were found between age, hematocrit, serum albumin, fever or duration of anticancer chemotherapy and pharmacokinetic parameters. It is suggested that the increment of tobramycin dose regimen wold be considered in patients with hematologic malignancy, and dose readjustment followed by close monitoring of plasma drug concentration would be required.

시동전동기의 기동소음 평가기법에 관한 실험적 연구

신영재,강성황 安東大學 1994 安東大學 論文集 Vol.16 No.1

Noise and its effect on quality has recently become an important issue in the area of the starting motor cranking sound. This study has determined the algorithm of cranking sound evaluation for starting motor. Traditional noise analysis techniques did notcoonsistently correlate with subjective jury rating of the cranking sound. As a result, an algorithm based on time domain microphone output was developed to correlate objective measurements of cranking sound to subjective jury ratings. The algorithm contains three parameters to describe the cranking sound, and good correlation between the two ratings has been observed. When jury test results has been inconclusive, the algorithm has proven helpful in evaluating incremental design changes to current starting motor specification.

Effect of Mn and C on Age Hardening of Fe–Mn–Al–C Lightweight Steels

Sung‑Won Park,Jun Young Park,Kyong Mox Cho,Jae Hoon Jang,Seong‑Jun Park,Joonoh Moon,Tae‑Ho Lee,Jong‑Ho Shin 대한금속·재료학회 2019 METALS AND MATERIALS International Vol.25 No.3

The effects of Mn and C content on the age hardening of Fe–Mn–Al–C lightweight steels, which have austenitic or duplex(austenite and ferrite) microstructures, were investigated. An increase in Mn content induced a delay of the age hardeningthat is caused by the formation of intra-granular κ-carbides. In order to interpret the effect of Mn content, first-principlescalculations were conducted using the supercells of Fe24Al8C8,Fe24Al8C7,Fe24(Al7Mn)C8, and Fe24(Al7Mn)C7. The calculationsshowed that an increase in Mn content could be the source of the delay of the intra-granular κ-carbide formation bysuppressing C atom’ occupation of the vacancy at the body-centered site of L12. An increase in C content accelerated theformation of intra-granular κ-carbides, which induced the intense age hardening, and coarse inter-granular κ-carbides, whichresulted in significant decrease in impact absorbed energy due to inter-granular fracture.

播種期 및 育苗日數가 黃色種 담배의 初期生育 및 收量에 미치는 影響

申周植,盧載榮,裵吉寬,朴相一 충북대학교 엽연초연구소 1984 煙草硏究 Vol.11 No.-

This experiment was carried out to study the influence of different sowing time, seedling age (the degree of delayed setting) and seedlingbed materials on the growth and yield components of flue-cured tobacco. The variety applied was N.C. 2326, was sown on March 1,11,21 and 31. Those plants were transplanted on the seeding bed mixed humus with sand at the ratio of humus 9 : sand 1 and humus 3: sand 7, 25 days after sowing. Seedlings were grown for 40, 50, 60 and 70 days (from sowing to setting) on the seed bed and seedling bed, and set on the pots (1/5,000a) in the vinyl house. The results obtained were as forlows . 1.The amount of growth of seedlings increased by late sowing and delayed setting. 2.Until the time before the maximum growth stage after setting, stem heigth was larger in the plots of late sowing and delayed setting. After the middle part of maximum growth stage, the earner the sewing time was, the more remarkable the influence of seedling age on the stem elongation was and the larder the seedling age was, the more remarkable the influence of sowing time on the stem elongation was. 3.Stem diameter was large in the plot to late sowing until the early part of maximum growth stage but after the middle part of maximum growth stage the diameter was large in the plants sown at March 11 and March 21. 4.The number of leaves per plant increased by late sowing and delayed setting shown significant difference after maximum growth stage. 5.Late setting made the stem height high and number of leaves per plant more. The size of largest leaf was small in the plot of early sowing and large in the plot set after May 10. 6.It takes more days to reach a topping time from sowing and setting in the case of early sowing and early setting. 7.In early sowing plots, the leaf area of lugs and cutlers decreased by younger seedling age, and in late sowing plots, that decreased by older seedling age. The leaf area of leaf and tip at different treatments showed similar results, but in the plots sown at March 11 and 21, largest leaf was shown in the plot of 50- day seedlings. The area of green tip decreased by late seeding and delayed setting. As a result of theses the plant type showed sylindrical in the plot of early sowing and younger seedling age, and cone shape in the plot of late sewing and older seedling age. 8.The earlier the sowing time and the younger the seedling age were, the heavier the weight of unit leaf area of lugs and cutters, but there were little influences of different sowing time and seedling age on the weight of unit leaf area of leaf, tip and green tip. The percentage of dry matter showed similar tendency to the results of weight of unit leaf area. 9.Late sowing (March, 31) decreases the weight of a cured leaf. Weight of cured cutter was largest in the plots sowing March 1 and that of leaf tip and green tip was largest in the plots sowing March 11 and March 21. The weight of cured lugs was largest in 40 and 50-day seedlings, and that of tip and green tip was largest in 50-day seedlings. There were little differences of weight of a cutter and leaf among the treatments of different seedling age. 10.In 40- day seedlings, the area and weight of leaves per plant increased by late sowing, and in 70-day seedlings, those increased by early sowing. In 50 and 60-day seedlings, those were highest in the plots sown at March 11 and March 21. Largest weight and area of leaves per plant was shown in the plot set on May 10, and the plots set on April 10, and June 1 showed significantly low weight of loaves per plant. 11.Late sowing and older seedling age increased the leaf thickness of those leaves. Different sowing time and the seedling age did not influence on the leaf area contraction ratio and leaf thickness of leaf, tip and green tip. 12.There were significantly negative correlation between leaf area of lug and cutter and weight per unit leaf area, percentage of dry matter and leaf thickness of the lug and cutters, but no correlation between those characters of leaf, tip and green tip. Weight per unit leaf area correlated positively with percentage of dry matter and specific leaf weight in all stalk position. In the lug and cutter, weight per unit leaf area correlated positively with leaf thickness and negatively with leaf area contraction between weight per unit leaf area and leaf area contraction ratio. There were negative correlation between leaf thickness and leaf area contractions of lugs and cutters, and no correlation between those characters of leaf, tip and green tip. 13.There were not significant effects of seedling bed materials applied in this experiment on the growth after setting and yield components.

유한요소법을 이용한 환자별 교정시스템 구축의 기초 알고리즘 개발과 적용 : Development and Application of the Basic Algorithm

신정욱,남동석,김태우,이성재 대한치과교정학회 1997 대한치과교정학회지 Vol.27 No.5

본 연구는 최근 많은 연구가 행해지고 있는 유한요소를 이용한 교정시스템구축에 있어서 정상교합자가 아닌 부정교합 환자별 유한요소 모델구출을 위한 기초 알고리즘 개발에 그 목표가 있다. 기존에는 유한요소 분석을 위해서 한 환자의 치열을 유한요소 모델로 재현하고자 할때, 전처리 과정에 대부분의 시간을 소요해야만 했다. 본 연구에서는 이 전처리과정을 자동화할 수 있는 기초 알고리즘을 마련하여, 향후 이 방면의 연구를 용이하도록 하였다. 이를 위하여 임의로 선택된 부정교합 환자의 상하악 모형을 이용하여 치아의 삼차원적인 위치를 계측할 수 있는 표준화된 방법을 제시하였으며, 또한 본 연구를 통하여 개발된 프로그램을 이용하여 유한요소의 전처리과정을 자동화할 수 있는 기초을 마련하였다. 본 연구는 아래와 같은 단계를 거쳐 수행하였다. 1. 상, 하악 중절치에서 제2대구치까지 14개의 치아 형상을 상, 하악 각각 구축하여 개별 화일로 저장한다. 2. 이 치아에 standard bracket을 치관의 FA point와 bracket slot의 중앙이 일치되도록 부착한다. 3. 대상 환자의 석고 모형을 제작한다. 4. 석고 모형에서 본 연구를 위해 제작된 기구들로 치아의 crown inclination, angulation, 그리고 교합면에서 치관첨까지의 수직거리를 계측한다. 5. 표준화하여 촬영한 석고모형의 사진을 이용하여 화상처리기법으로 치아의 치열궁 형태를 파악한다. 또한 사진상에서 치아의 수평적 위치 및 회전량을 측정한다. 6. 계측된 crown inclination, angulation, 수직거리, 그리고 치열궁의 형태 미 치아의 회전정도 등을 회전행열을 이용하여 만든 프로그램에 입력한다. 이 프로그램은 유한요소 전처리 과정에 필요한 치아의 배열상태를 담고 있는 데이터를 결과파일로 제공하는데, 이 결과 파일은 일반적인 상용 유한요소 프로그램에서도 사용 가능하다. 7. 개개의 치아파일은 이 결과 파일에 따라 삼차원적인 위치로 배열되어 선택한 특정환자의 유한요소 모델을 완성하게 된다. 상기와 같은 여러 단계를 거친 후 임의로 선택한 부정교합자의 상, 하악 유한요소 모델구축을 위한 기초 자료를 구출할 수가 있었으며, 개개인 환자의 모형에서 얻은 정보로 유한요소 모델로 재현하기 위한 전처리과정의 기초 알고리즘을 마련하였다. The purpose of this study is to develop the basic algorithm for the finite element method modeling of individual malocclusions. Usually, a great deal of time is spent in preprocessing. To reduce the time required, we developed a standardized procedure for measuring the position of each tooth and a program to automatically preprocess. The following procedures were carried to complete this study. 1. Twenty-eight teeth morphologies were constructed three-dimensionally for the finite element analysis and saved as separate files. 2. Standard brackets were attached so that the FA points coincide with the center of the brackets. 3. The study model of a patient was made. 4. Using the study model, the crown inclination, angulation, and the vertical from the tip of a tooth was measured by using specially designed tools. 5. The arch form was determined from a picture of the model with an image processing technique. 6. The measured data were input as a rotational matrix. 7. The program provides an output file containing the necessary information about the three-dimensional position of teeth, which is applicable to several finite element programs commonly used. The program for a basic algorithm was made with Turbo-C and the subsequent outfile was applied to ANSYS. This standardized model measuring procedure and the program reduce the time required, especially for preprocessing and can be applied to other malocclusions easily.

비정질 Fe_(80)B_(20) 합금의 결정화

신영남,서동성,김재경,양재석 대구대학교 기초과학연구소 1995 基礎科學硏究 Vol.12 No.-

연자성 재료의 하나인 비정질 Fe_(80)B_(20) 합금을 단롤법으로 제작하여 주차열분석(Differential scanning calorimeter)실험을 통해 결정화 온도를 알아보고, 비정질 시료와 결정화된 시료를 X-선회절실험 및 Mo¨ssbauer 분광실험으로 생성된 결성상의 변화를 규명 분석하였다. DSC 실험을 통해서 얻은 결정화 시작온도 426℃, Peak온도 458℃, 종료온도 476℃임을 알았으며, 700℃에서 각각 1시간 동안 열처리를 하였다. 시료를 XRD로 분석한 결과 열처리 전에는 halo상의 비정질 상태임을 확인하였고, 열처리 후의 시료는 격자상수가 5.8Å인 α-Fe상과 격자상수가 a=8.63Å. c=4.29Å인 t-Fe_(3)B상이 나타남을 확인하였다. 결정화된 시료들의 Mo¨ssbauer spectrum은 4조의 6중선으로 연산하여 초미세자기장값과 상대면적값에 의해 각 시료의 Fe/B값으로부터 426℃, 458℃, 476℃에선 FeB상으로, 700℃에선 Fe_(2)B상과 Fe_(3)B상이 혼합되어 있다고 볼 수 있다. 한편 결정화된 시료들의 Mo¨ssbauer spectrum은 subspectra L1, L2, L3, L4, L5 및 L6의 6개의 6중선으로 fitting된 초미세자기장 α-Fe값은 333~339kOe, t-Fe_(3)B값은 220~295kOe, o-Fe_(3)B값은 230~283kOe 그리고 시료중 700℃에서 결정화된 L6의 초미세자기장값이 236kOe으로서 o-Fe_(3)B상과 t-Fe_(3)B상이 혼합되어져 있다고 볼 수 있다. 또한 열처리 온도가 증가 할수록 각 시료는 α-Fe상의 존재비가 증가하였고 t-Fe_(3)B상과 o-Fe_(3)B상이 공존하였으며, 700℃에서는 t-Fe_(2)B상이 존재함을 알았다. The crystallization of Fe_(30)&B_(23) amorphous alloy, prepared by rapid quenching from melt, was studied by differential s c a e calorimetry, X-ray djffraction and Mossbauer spectroscopy. Annealing condition was determined with the aid of DSC curves. From this measurements, this aUoy was annealed 1 hour at 426℃, 458℃ 476℃ and 700℃ in 5 × 10^(-6) torr. The lattice constants for the isochronally annealed Fe_(30)-B_(20) alloy were a-Fe(5.8A) and t-F~B(a=8.63A, c= 4.29A). The Mo¨ssbauer spectra of the Fe_(30)-B_(20) alloy consist of 6-sixlets absorption peaks. Hyperfine fields are obtained 333 - 339kOe, 2% - 295kOe, 252 - 262kOe, 220 - 225kOe, 272 - 283kOe and 230 - 236kOe. These phases are assumed to be crystalline α-Fe, t-Fe₃B, O-Fe₃B and t-Fe₂B.

Al 7075합금의 열간성형 및 반응고성형 공정에 따른 미세조직과 경도 특성

신평우,이상용,전재일 國立 昌原大學校 産業技術硏究所 1998 産技硏論文集 Vol.12 No.-

Various precision forging processes were applied for Al 7075 alloy. Among the each forging parts produced by existing multi-stage forging, improved single-stage forging and thixoforging(new technology of a near-net shape manufacture), thixoforging was excellent at viewpoints of homogeneity and formability. Hardness values of each forging parts produced by single-stage forging and thixoforging process came close to existing multi-stage forging parts. Irregular grain boundary and particle for thixoforging process were homogenized by artificial aging treatment(T6) and the hardness value was increased considerably.