대학생의 취업스트레스와 자아존중감, 자아효능감, 외모관리행동의 관계

김보라,김유진,김지희,노혜진,오승희,홍지혜,황윤희,박선아 水原大學校 2016 論文集 Vol.30 No.-

Purpose: Many university students are under a lot of job-seeking stress because the employment rate is low. This study sought to determine the relationship between job-seeking stress, self esteem, self efficacy and appearance management behavior amongst university students focusing on nursing. Methods: This descriptive correlational study evaluated the relationships between job-seeking stress, self esteem, self efficacy and appearance management behavior of 340 university students was conducted between September 1 and October 5, 2015. Results: The correlational analysis between job-seeking stress, self esteem, self efficacy and appearance management behavior revealed a negative correlation between job-seeking stress, self esteem and self efficacy and a positive correlation between job-seeking stress and appearance management behavior. In addition, age also correlated with self esteem, self efficacy and appearance management behavior. Conclusion: Stress correlated with self esteem and self efficacy and appearance management behavior. Therefore job-seeking stress may be reduced through not only self esteem and self efficacy enhancement programs but also management according to age.

자동차용 실리콘 가속도센서의 개발(Ⅱ)

이종현,신장규,이상룡,천희곤,조찬섭,심준환,류인식,박석홍,허정준,박기열 경북대학교 센서기술연구소 1994 연차보고서 Vol.1994 No.-

자동차의 air-bag 장치에 실용될 수 있는 압저항형 단결정 실리콘 가속도센서 칩을 개발하기 위하여 결정 실리콘 미세구조의 제조방법을 확립하고, 단위공정의 검증을 통하여 일괄공정에 의한 PROTO-TYPE 칩을 만드는 기술을 연구하였다. 단결정 실리콘 미세구조는 선택확산법을 이용하여 정확히 선택된 영역에만 air-gap을 형성하여 미세구조의 측면식각을 방지하는 선택확산법에 의한 실리콘 마이크로머시닝 기술로 제조하였다. 일괄공정을 위한 단위공정확립을 위하여 PROTY-TYPE 8빔 브릿지형 가속도 센서를 제조하였다. 제조된 칩의 가속도에 따른 출력전압은 선형성을 나타내고 있으며, 감도는 약 50 ㎶/V·g로 나타났다. 이 감도는 50G용 가속도센서의 사양을 만족하지 못했다. 이는 공정에 의한 문제라기 보다는 가속도센서의 시뮬레이션에 의해 설계한 구조가 이미 원하는 감도에 못 미친다는 것으로 생각된다. 따라서 2차 공정으로 제조될 가속도센서의 파라미터를 SuperSAP 유한요소 패키지를 이용하여 실리콘 미세구조부의 파라미터에 따른 특성을 시뮬레이션하였다. 설계된 50G용 가속도센서의 mass Pad의 반경 및 빔 길이, 빔 폭, 빔 두께, 그리고 mass의 각 파라미터 값은 700 ㎛, 120 ㎛, 5 ㎛, 1.0 ㎎ 이었다. 반도체 공정기술, 관성질량 제조법 및 선택확산을 이용한 마이크로머시닝을 사용하여 일괄공정으로 8빔 브린지형 가속도센서를 제조하였다. We researched the establishment of the silicon microstructure fabrication technique to develop a piezoresistive type silicon acceleration sensor chip and the technique to make a proto-type chip by the verification of the unit-process. Silicon microstructure is fabricated silicon micro-machining by selective diffusion method. This method prevent a side-etching of microstructure because selective diffused region is only formed an air-gap. We fabricated a proto-type 8-beam bridge-type acceleration sensor to establish the unit-process for the batch-process. The output voltage of the chip represented linearity with acceleration, and the sensitivity was about 50 ㎶/V·g. But this sensitivity dosen't satisfy the requirements of a practical acceleration sensor. The cause of this result is assumed not process problem, but the structure designed by simulation isn't suitable already. Threfore, the characteristics of parameters of the acceleration sensor that will be fabricated by 2nd-process is simulated by SuperSAP finite-element package. The determined parameter values of beam length, beam width, beam thickness, mass, and mass radius are 120 ㎛, 5 ㎛, 1.0 ㎎, and 700 ㎛, respectively. We fabricated 8-beam bridge-type acceleration sensor by batch-process using a semiconductor process technique, proof-mass fabrication method, and micromachinig using selective diffusion.

Thematic Poster : TP-12 ; Experience of Pulmonary Rehabilitation in Patients with COPD in Regional Pulmonary Center

( Yu Hui Won ),( Jin Young Chun ),( Sung Hee Park ),( Jeong Hwan Seo ),( Myoung Hwan Ko ),( Yong Chul Lee ) 대한결핵 및 호흡기학회 2014 대한결핵 및 호흡기학회 추계학술대회 초록집 Vol.118 No.-

Background: Pulmonary rehabilitation (PR) has been demonstrated to reduce dyspnea, increase exercise capacity, and improve quality of life in individuals with chronic obstructive pulmonary disease (COPD). We report our experiences to operate PR program of COPD in our PR clinic which belongs to Regional Pulmonary Center in Chon-Buk area. Methods: From March to June 2014, hospital records of patients in our PR clinic were reviewed retrospectively. For inpatients program, initial assessment were done by rehabilitation physician and individualized PR programs were prescribed considering patient’s exercise capacity. PR program included aerobic exercise for 30 minutes, resistance training using elastic bandage, breathing retraining (diaphragmatic and pursed lip breathing), device training for secretion management using acapella, flutter, PEP device, and VEST (high frequency chest wall oscillation), and respiratory muscle training. Outpatient’s PR program was conducted as hospital based PR or home based PR for 8 weeks. Results: In our PR clinic, among total 154 patients who were consulted for PR, 84 (54.5%) was COPD with acute exacerbation (AE) (Table 1). No serious complications were developed during PR program. Eighteen patients (11.7%) refused to practice PR due to personal reasons. For outpatient clinic, eighteen (56.3%) of 32 stable COPD patients were included (Table 1). Characteristics for COPD patients who received PR program were described in Table 2. Among these COPD patients, 34.3% performed hospital based PR, 34.3% home based PR, 20% home-based PR with weekly or every two weeks hospital visit, and 11.4% was missed follow up. Conclusions: For 4 months, patients who underwent PR were gradually increased. Since PR program has been accepted essential, non-medical treatment for COPD, PR should be included to COPD treatment. Also, korean researches about clinical benefits of COPD management would be necessary to settle down PR in Korea.

Effect of Processing Conditions on the Microstructural Evolution and Resulting Residual Stress in Ultrasonic Shot Peened 304SS (초)

( Yu Hui ),( Jiling Dong ),( Youngsik Pyoun ),( Insik Cho ),( Jine Sung Jung ),( Keesam Shin ) 대한금속재료학회 ( 구 대한금속학회 ) 2008 대한금속재료학회 학술대회 개요집 Vol.2008 No.1

Surviving the COVID-19 pandemic: early response of a gynecologic oncology unit in Singapore

Yu Hui Lim,Wen Yee Chay,Wai Loong Wong 대한부인종양학회 2020 Journal of Gynecologic Oncology Vol.31 No.6

-

Effects of Benzoic Acid and Thymol on Growth Performance and Gut Characteristics of Weaned Piglets

Hui Diao,Ping Zheng,Bing Yu,Jun He,Xiangbing Mao,Jie Yu,Daiwen Chen 아세아·태평양축산학회 2015 Animal Bioscience Vol.28 No.6

A total of 144 weaned crossed pigs were used in a 42-d trial to explore the effects of different concentrations/ combinations of benzoic acid and thymol on growth performance and gut characteristics in weaned pigs. Pigs were randomly allotted to 4 dietary treatments: i) control (C), basal diet, ii) C+1,000 mg/kg benzoic acid+100 mg/kg thymol (BT1), iii) C+1,000 mg/kg benzoic acid+200 mg/kg thymol (BT2) and, iv) C+2,000 mg/kg benzoic acid+100 mg/kg thymol (BT3). Relative to the control, pigs fed diet BT3 had lower diarrhoea score during the overall period (p<0.10) and improved feed to gain ratio between days 1 to 14 (p<0.05), which was accompanied by improved apparent total tract digestibility of ether extract, Ca and crude ash (p<0.05), and larger lipase, lactase and sucrose activities in the jejunum (p<0.05) at d 14 and d 42. Similarly, relative to the control, pigs fed diet BT3 had higher counts for Lactobacillus spp in digesta of ileum at d 14 (p<0.05), and pigs fed diets BT1, BT2, or BT3 also had higher counts of Bacillus spp in digesta of caecum at d 14 (p<0.05), and lower concentration of ammonia nitrogen in digesta of caecum at d 14 and d 42 (p<0.05). Finally, pigs fed diet BT3 had higher concentration of butyric acid in digesta of caecum at d 42 (p<0.05), and a larger villus height:crypt depth ratio in jejunum and ileum at d 14 (p<0.05) than pigs fed the control diet. In conclusion, piglets fed diet supplementation with different concentrations/combinations of benzoic acid and thymol could improve feed efficiency and diarrhoea, and improve gut microfloral composition. The combination of 2,000 mg/kg benzoic acid+100 mg/kg thymol produced better effects than other treatments in most measurements.

[PB-0071] GBS 분석을 통한 국내 무(Raphanus sativus L.) 품종의 유전적 유연관계 분석

Hui Yeon Hong(Hui Yeon Hong),Jun Ho Lee(Jun Ho Lee),Yoon Ah Jang(Yoon Ah Jang),Jin Hee Kim(Jin Hee Kim),Ji Won Kim(Ji Won Kim),Ji Hyeon Lim(Ji Hyeon Lim),Hye Won Yu(Hye Won Yu),Won Byoung Chae(Won Byo 한국육종학회 2022 한국육종학회 공동학술발표집 Vol.2022 No.-

Renewable Low-viscosity Dielectrics Based on Vegetable Oil Methyl Esters

Hui Yu,Ping Yu,Yunbai Luo 대한전기학회 2017 Journal of Electrical Engineering & Technology Vol.12 No.2

Vegetable oil dielectrics have been used in transformers as green alternatives to mineral insulating oils for about twenty years, because of their advantages of non-toxic, biodegradability, and renewability. However, the viscosity of vegetable oils is more than 3 times of mineral oils, which means a poor heat dissipation capacity. To get low-viscosity dielectrics, transesterification and purification were performed to prepare vegetable oil methyl esters in this study. Electrical and physical properties were determined to investigate their potential as dielectrics. The results showed that the methyl ester products had good dielectric strengths, high water saturation and enough fire resistance. The viscosities (at 40℃) were 0.2 times less than FR3 fluid, and 0.7 times less than mineral oil, which indicated superior cooling capacity as we expected. With the assistance of 0.5 wt% pour point depressants, canola oil methyl ester exhibited the lowest pour point (-26℃) among the products which was lower than FR3 fluid (-21℃) and 25# mineral oil (-23℃). Thus, canola oil methyl ester was the best candidate as a low-viscosity vegetable oil–based dielectric. The low-viscosity fluid could extend the service life of transformers by its better cooling capacity compared with nature ester dielectrics.

Path Authorization Technique in Diameter Base Protocol

Hui-Jong Yu,Hyun-Gon Kim 대한전자공학회 2004 ICEIC:International Conference on Electronics, Inf Vol.2004 No.8

Prevalence, Risk Factors, and Psychological Effects of Primary Nocturnal Enuresis in Chinese Young Adults

Hui Jie Hu,Zhen Wei Zhang,Yu Liang,Yan Yan Luo,Qi Feng Dou,Cui Ping Song,Hui Min Zhang,Ying Zhao,Guang Run Tian,Ke Zhang,Qiu Fang Mao,Jing Gui Song,Soren Rittig,Jian Guo Wen 대한배뇨장애요실금학회 2021 International Neurourology Journal Vol.25 No.1

Purpose: This study aimed to investigate the prevalence, risk factors, and effects of primary nocturnal enuresis (PNE) on physical and mental health in young adults in mainland China. Methods: An anonymous questionnaire was used to collect information including the sociodemographic characteristics, history of PNE, family history, daytime voiding symptoms, Pittsburgh Sleep Quality Index (PSQI) scores, Self-Esteem Scale (SES), and Self-Rating Depression Scale (SDS). A total of 22,500 university students from 23 provinces and 368 cities in mainland China were included. Results: In total, 21,082 questionnaires were collected, and 20,345 of them qualified for statistical analysis. The PNE prevalence was 1.17%, and the distribution of monosymptomatic nocturnal enuresis (MNE) and nonmonosymptomatic nocturnal enuresis (NMNE) was 66.1% and 33.9%, respectively. In total, 28% of respondents with PNE reported bedwetting daily, 31.6% between 1 and 7 times weekly, and 40.4% between 1 and 4 times monthly; 80% of PNE cases had no history of treatment. The prevalence of PNE in patients with a family history, frequency, urgency, urinary incontinence, and recurrent urinary tract infections was significantly higher than in those without these conditions (P<0.001). PNE was significantly correlated with the PSQI total score (sleep quality) (P=0.011). The SES score was lower and the SDS was higher (P<0.001) in the PNE group than in those without PNE. Conclusions: In mainland China, the PNE prevalence among young adults was found to be high, and PNE had significant effects on physical and mental health. Risk factors included a family history, daytime voiding symptoms, and lack of treatment.