http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이동 인터넷 프로토콜을 위한 개선된 SKIP Firewall Traversal
김민경(Min-Gyung Kim),한규호(Kyu-Ho Han),채동현(Dong-Hyun Chae),마영식(Young-Sik Ma),안순신(Sun-Shin An) 한국정보과학회 2002 한국정보과학회 학술발표논문집 Vol.29 No.1A
최근들어 security가 데이터 통신의 중요한 이슈로 떠오르고 여러 기관들의 망에 Firewall을 설치하여 보호하는 것은 점점 더 일반화 되고있다. Sun의 SKIP Firewall Traversal 방법은 Mobile IP가 Firewall이 설치된 환경에서도 제대로 동작할 수 있도록 고안된 것이다. 그러나 이 방법은 실제 적용에 있어 몇몇 문제점이 발견된다. 본 논문에서는 이 문제점들을 살펴보고 그것을 해결하는 방안을 제시하고자 한다.
高玉鉉,姜馨龍,李敦日,金永洙,白采善,金京洙 조선대학교 약학연구소 1990 藥學硏究誌 Vol.12 No.1
In order to synthesize Methotraxate(MTX) analogues, author synthesized 3-〔〔〔2-(N-Ethyl-N-tosyl-p-aminobenzenecarboxamido)ethyl〕thio〕methyl〕-2-methylimidazo-〔1,2-a〕pyridine(15), 2-(N-Ethyl-N-toyl-p-aminobenzoyl)-5-phenyl-2H-tetrazole(16),2-(N-Ethyl-N-tosyl-p-aminobenzoyl)-5-(nitrobenzyl)-2H-tetrazole(17), 3-〔〔〔2-(N-Ethyl-p-aminobenzenecarboxamido〕ethyl〕thio〕methyl〕-2-methylimidazo〔1,2-a〕pyridine(18), 2-(N-E-thyl-p-aminobenzoyl)-5-phenyl-2H-tetrazole(19), 2-(N-Ethyl-p-aminobenzoyl)-5-(4-nitro-benzyl)-2H-tetrazole(20), 2-Amino-3-cyano-5-〔3-〔〔〔2-(N-ethyl-p-aminobenzenecarboxa-mido)ethyl〕thio〕methyl〕-2-methylimidazo〔1,2-a〕pyridino〕methyl pyrazine(21), 2-Amino-3-cyano-5-〔2-N-ethyl-p-aminobenzol)-5-phenyl-2H-tetrazol-2-yl〕methylpyrazine(22), 3-A-mino-3-cyano-5-〔2-N-ethyl-p-aminobenzol)-5-(4-nitrobenzyl)-2H-tetrazol-2-yl〕methylp-yrazine(23), 2,4-Diamino-6-〔3-〔〔〔2-(N-ethyl-p-aminobenzenecarboxamido)ethyl〕thio〕methyl〕-2-methylimidazo〔1,2-a〕pyridino〕 methylpteridine(24), 2,4-Diamino-6-〔2-(N-ethyl-p-aminobenzoyl)-5-phenyl-2H-tetrazol-2-yl〕methylpteridine(25), and 2,4-Diamino-6-〔2-(N-ethyl-p-aminobenzol)-5-(4-nitrobenzyl)-2H-tetrazol-2-yl〕methylpteridine(26), respectively.
Preliminary Design of the Forced Gas Drying System for Spent Nuclear Fuel Dry Storage
Gyung-sun Chae,Kyung-wook Shin,Byeong-mok Park,Jae-hyun Han,Geon-hui Lee,Jae-seok Park 한국방사성폐기물학회 2017 방사성폐기물학회지 Vol.15 No.4
원자력발전소내 습식저장중인 사용후핵연료의 건식저장을 위해서는 캐니스터 내부에 사용후핵연료를 옮겨 담은 이후, 건 식저장 캐니스터 내장품이나 사용후핵연료 다발의 부식방지 및 피복관의 열화방지를 위해 모든 수분은 제거해야 한다. 캐 니스터 내부의 수분을 제거하는데 사용할 수 있는 기체강제순환 건조시스템 개발을 위한 연구개발이 진행중이다. 본 연구 에서는 기체강제순환 건조시스템 설계, 제작을 위한 예비설계를 수행하였다. 예비설계에는 캐니스터 내부 잔존수분 제거를 위한 건조사례조사, 건조관련 규격이나 표준, 건조합격기준, 건조장치구성, 현장요구분석, 습식저장중인 사용후핵연료 특성 을 포함하였다. 예비설계를 통하여 기체강제순환 건조시스템의 설계 개념도와 P&ID를 도출하였고, 이를 활용하여 건조시 스템 제작을 위한 상세설계를 수행할 것이다. For dry storage of the spent nuclear fuel (SNF) stored in the storage pool of a nuclear power plant, essentially all moisture must be removed to prevent corrosion of the assembly and canister internals and/or degradation of fuel cladding integrity after SNF canister loading operation. R&D work is now in progress on a forced gas drying system that can be used to remove residual water in canisters. In this work, preliminary design is performed to manufacture the forced gas drying system. This process includes a case study of dry methods for canister moisture removal, relative codes and standards, confirmation of adequate dryness, needs analysis at plant sites, and characteristics of SNF stored in pools. Through this preliminary design work, we obtained a conceptual flow diagram and preliminary P&ID of the forced gas drying system. The results of this study can be used to determine details of the design to manufacture the forced gas drying system.
Case Study on the Quantification of Residual Moisture in Dry Storage System
Gyung-Sun Chae,Geon-Hui Lee,Kyung-Wook Shin,Seung-Hwan Yu 한국방사성폐기물학회 2022 한국방사성폐기물학회 학술논문요약집 Vol.20 No.1
To dry storage of spent nuclear fuel withdrawn the wet storage, all moisture inside the dry storage container must be removed to ensure the long-term integrity and retrievability. Substantial amounts of residual water in dry storage container may have potential impacts on the fuel, cladding, and other components in the dry storage system, such as fuel degradation and cladding corrosion, embrittlement, and breaching. The drying could perform as a vacuum drying process or a forced helium dehydration process. In NUREG-1536, the evacuation of most water contained within the canister is recommended a pressure of 0.4 kPa (3 torr) to be held in the canister for at least 30 minutes while isolated from active vacuum pumping as a measure of sufficient dryness in the canister. Monitoring the moisture content in gas removed from the canister is considered as a means of evaluating adequate dryness. Dew point monitoring and special techniques could be used to evaluate this adequacy. Various studies are continuing for quantitative evaluation of residual moisture inside the dry storage system. Andrawes proposed a methodology for determining trace water contents in gaseous mixtures, utilizing gas chromatography together with a helium ionization source. A microwave plasma source and emission spectrometry were utilized to determine trace amounts of bound water in solid samples using peak areas of atomic oxygen (O) and hydrogen (H) emissions. Bryans measured the gas samples taken from the High Burn-Up Demonstration Cask at three intervals: 5 hours, 5 days, and 12 days after the completion of drying and backfilling in the North Anna power Station. To measure water content, a Vaisala humidity probe was used. Final results indicated that the cask gas water content built up over 12 days to a value of 17,400 ppmv ±10%, equivalent to approximately 100 g of water within the entire cask gas phase. Tahiyats also proposed a methodology that involves a direct current (dc) driven plasma discharge and optical emission spectroscopy for detecting and quantifying water vapor in a flowing gas stream under both trace and high water vapor loading conditions. For detecting water vapor concentration, the emission from H at 656.2 nm was employed. The H emission is the red visible spectral line generated by a hydrogen atom when an electron falls from the third lowest to the second lowest energy level, this suggests that the normalized H intensity can be used as a marker for water vapor detection and quantification. Several of the attempts are continuing to quantify water contents in dry storage system. Lessons learned by Case studies would be provided insights into how to improve future measurements.
Ho-Sun Yoo(유호선),Gyung-Joon Chae(채경준),Ji-Youn Hong(홍지연),Seong-Ho Choi(최성호),Chong-Kwan Kim(김종관) 대한치과의사협회 2008 대한치과의사협회지 Vol.46 No.12
이 연구의 목적은 초기 및 중등도 치주염 환자에서 전동칫솔을 사용할 경우 임상 지수의 향상 정도와 치주원인균의 정량적 감소 효과를 12주의 연구 기간 동안 평가하는 것이다. 25~55세의 환자 80명을 대상으로 12주 동안 진행하였으며, 치태지수 0.5 이상, 치은지수 0.5 이상을 나타내는 대상에서 일반 칫솔 혹은 전동칫솔 (Sonicare® Elite, Philips Oral Healthcare Inc., Snoqualmie, Washington, USA) 사용 군을 임의로 선정하였다. 하루 2회, 매 회 2분 간 사용하고, 각 군의 칫솔 사용을 교육하였다. 임상지수는 치태지수 (PI; Silness & Loe), 치은지수 (GI; Loe & Silness), 탐침 후 출혈 부위 (%), 치주낭 깊이, 부착소실을 초진, 1, 4, 12주에 측정하였다. Interleukin-1 (IL-1), MMP-8과 치은연하치태샘플에서 채취한 4 종류의 치주원인균 (Actinomyces viscosus, Porphyromonas gingivalis, Streptococcus sanguis, Tannerella forsythensis)에 대한 16S rRNA test는 초진, 1주, 12주에 측정하였다. 측정 결과 전동칫솔과 일반 칫솔 모두 임상지수의 유의한 감소가 나타났으며, 치은지수는 일반칫솔에 비해 전동 칫솔에서 감소효과가 통계적으로 더 우수하게 나타났다 (p<0.001). 탐침 후 출혈의 감소는 전동칫솔에서 76.73%, 일반칫솔에서 44.57% 정도로 전동칫솔 군이 더 우수하게 나타났다. 치주낭 깊이 감소는 초진에 비해 전동칫솔 군에서 18.55%, 일반칫솔 군에서 14.81% 정도로 나타났으며, 초진과 비교하였을 때 부착수준의 향상 정도는 전동칫솔 25.24%, 일반 칫솔 16.94% 정도로 두 군 모두 통계적으로 유의하게 개선되었다 (p < 0.001). 두 군 모두 IL-1 beta, MMP-8 농도의 감소가 있었으며, 치주원인균 중 A. viscosus, P. gingivalis, T.forsythensis 역시 두 군 모두에서 초진에 비해 12주에 유의한 감소를 나타내었으나, S.sanguis는 전동칫솔 균에서만 12주에 유의한 감소가 있었다. 이상의 결과에서 12주 간의 연구 기간 동안 초기 및 중등도 치주염 환자에서 소니케어 전동칫솔의 사용은 임상지수 및 치주 원인균 감소에 통계적으로 유의한 개선 효과를 나타내었다.