Ultrasonic Degradation of Endocrine Disrupting Compounds in Seawater and Brackish Water

So Young Park,Jong Sung Park,Ha Yoon Lee,Ji Yong Heo,Yeo Min Yoon,Kyung Ho Choi,Nam Guk Her 대한환경공학회 2011 Environmental Engineering Research Vol.16 No.3

In this study, a series of experiments was conducted on the relative degradation of commonly known endocrine-disrupting compounds such as bisphenol A (BPA) and 17α-ethinyl estradiol (Ee₂) in a single-component aqueous solution using 28 and 580 kHz ultrasonic reactors. The experiments were conducted with three different types of model water: deionized water (DI), synthetic brackish water (SBW), and synthetic seawater (SSW) at pH 4, 7.5, and 11 in the presence of inert glass beads and humic acids. Significantly higher sonochemical degradation (93-97% for BPA) occurred at 580 kHz than at 28 kHz (43-61% for BPA), regardless of water type. A slightly higher degradation was observed for Ee₂ compared to that of BPA. The degradation rate of BPA and Ee₂ in DI water, SBW, and SSW after 30 min of ultrasound irradiation at 580 kHz increased slightly with the increase in pH from 4 (0.073-0.091 min-1 for BPA and 0.081-0.094 min-1 for Ee₂) to 7.5 (0.087-0.114 min-1 for BPA and 0.092?0.124 min-1 for Ee₂). In contrast, significant degradation was observed at pH 11 (0.149-0.221 min-1 for BPA and 0.147-0.228 min-1 for Ee₂). For the given frequencies of 28 and 580 kHz, the degradation rate increased in the presence of glass beads (0.1 mm and 25 g) for both BPA and Ee₂: 0.018-0.107 min-1 without beads and 0.052-0.142 min-1 with beads for BPA; 0.021-0.111 min-1 without beads and 0.054-0.136 min-1 with beads for Ee₂. A slight increase in degradation of both BPA and Ee₂ was found as the concentration of dissolved organic carbon (DOC, humic acids) increased in both SBW and SSW: 0.107-0.115 min-1 in SBW and 0.087-0.101 min-1 in SSW for BPA; 0.111-0.111 min-1 in SWB and 0.092-0.105 min-1 in SSW for Ee₂. After 30 min of sonicating the humic acid solution, DOC removal varied depending on the water type: 27% (3 mg L-1) and 7% (10 mg L-1) in SBW and 7% (3 mg L-1) and 4% (10 mg L-1) in SSW.

Corrosion Behavior of Inconel X-750 for Carbon Anode Oxide Reduction Application

Jeon, Min Ku,Kim, Sung-Wook,Lee, Sang-Kwon,Choi, Eun-Young Korean Radioactive Waste Society 2020 방사성폐기물학회지 Vol.18 No.3

The corrosion behavior of the Inconel X-750 alloy was investigated for its potential application under a Cl₂-O₂ mixed gas flow in an Ar atmosphere. The corrosion rate was found to be negligible at temperatures up to 400℃ under a flow rate of 30 mL·min^-1 Cl₂ + 170 mL·min^-1 Ar, whereas an exponential increase was observed in the corrosion rate at temperatures greater than 500℃. The suppression of the corrosion reaction due to the presence of O₂ was verified experimentally at flow rates of 30 mL·min^-1 Cl₂ (4.96 g·m^-2·h^-1), 20 mL·min^-1 Cl₂ + 10 mL·min^-1 O₂ (2.02 g·m^-2 ·h^-1), and 10 mL·min^-1 Cl₂ + 20 mL·min^-1 O₂ (1.34 g·m^-2·h^-1) under a constant Ar flow rate of 170 mL·min^-1 at 600℃ for 8 h. The surface morphology analysis results revealed that porous surfaces with tunnel-type holes were produced under the Cl₂-O₂ mixed-gas condition. Furthermore, the effects of the Cl₂ flow rate on the corrosion rate were investigated, indicating that its impact was negligible within the range of 5-30 mL·min^-1 Cl₂ at 600℃.

Corrosion Behavior of Hastelloy C-276 for Carbon-anode-based Oxide Reduction Applications

Jeon, Min Ku,Kim, Sung-Wook,Choi, Eun-Young Korean Radioactive Waste Society 2020 방사성폐기물학회지 Vol.18 No.3

The corrosion behavior of Hastelloy C-276 was investigated to identify its applicability for carbon-anode-based oxide reduction (OR), in which Cl₂ and O₂ are simultaneously evolved at the anode. Under a 30 mL·min^-1 Cl₂ + 170 mL·min^-1 Ar flow, the corrosion rate was less than 1 g·m^-2·h^-1 up to 500℃, whereas the rate increased exponentially from 500 to 700℃. The effects of the Cl₂-O₂ composition on the corrosion rate at flow rates of 30 mL·min^-1 Cl₂, 20 mL·min^-1 Cl₂ + 10 mL·min^-1 O₂, and 10 mL·min^-1 Cl₂ + 20 mL·min^-1 O₂ with a constant 170 mL·min^-1 Ar flow rate at 600℃ was analyzed. Based on the data from an 8 h reaction, the fastest corrosion rate was observed for the 20 mL·min^-1 Cl₂ + 10 mL·min^-1 O₂ case, followed by 30 mL·min^-1 Cl₂ and 10 mL·min^-1 Cl₂ + 20 mL·min^-1 O₂. The effects of the chlorine flow rate on the corrosion rate were negligible within the 5-30 mL·min^-1 range. A surface morphology analysis revealed the formation of vertical scratches in specimens that reacted under the Cl₂-O₂ mixed gas condition.

Effects of Supercritical Carbon Dioxide Treatment on Meat Quality and Sensory Evaluation in Soy Sauce and Hot-pepper Paste Marinated Pork

Young Min Choi,Sang Hoon Lee,Jee Hwan Choe,Kyoung Heon Kim,Min Suk Rhee,Byoung Chul Kim 한국축산식품학회 2013 한국축산식품학회지 Vol.33 No.5

The objective of this study was to investigate the effects of supercritical carbon dioxide (SC-CO2) treatment on meat quality and sensory evaluation of marinated pork. Meat marinated in two traditional Korean marinades, soy sauce and hot-pepper paste, and raw marinated meat were then treated with 7.4, 12.2, or 15.2 MPa CO2 at 31.1oC for 10 min. The SC-CO2 treatments had no effect on the meat pH (p>0.05) or Warner-Bratzler shear force (p>0.05). There was no significant difference (p>0.05) in the total loss (sum of treatment loss and cooking loss) between the control and SC-CO2 treated samples at 15.2 MPa (soy sauce marinated pork: 21.78 vs. 18.97%; hot-pepper marinated pork: 21.61 vs. 18.01%). After the SC-CO2 treatment, lighter surface colors were observed in the treatment samples compared to those of the control samples (p< 0.001). However, tasting panelists were unable to distinguish a difference in color or in overall acceptability of the control and treatment (p>0.05). In the case of soy sauce marinated pork, when SC-CO2 applied at 15.2 MPa and 31.1oC for 10 min, treatment samples showed a tenderer meat than the control samples. Therefore, the SC-CO2 treatment conditions had no adverse effects on the sensory quality characteristics of the marinated meat products.

장간막 림프절염으로 발현된 Kikuchi-Fujimoto병 1예

최원섭,이승순,권진우,이영석,김선영,전선영,김민정,정두련 대한감염학회 2006 감염과 화학요법 Vol.38 No.5

Kikuchi-Fujimoto 병은 주로 경부 림프절을 침범하는 질환이지만, 드물게 회맹부 장간막 림프절을 침범하여, 발열을 동반한 우하복부 통증과 반발압통을 나타내는 장간막 림프절염을 일으킬 수 있다. 급성 충수돌기염과 유사한 양상의 급성 복증을 호소하는 젊은 성인의 경우, 장간막 림프절염 여부를 확인하여야하며, 그럴 경우 Kikuchi-Fujimoto 병을 감별 진단에 포함시켜야 한다. 저자 등이 경험한 장간막 림프절염으로 발현된 성인의 KikuchiFujimoto 병 1예는 국내에서는 최초로 발견된 것이기에 문헌 고찰과 함께 보고하는 바이다. Kikuchi-Fujimoto disease or histiocytic necrotizing lymphadenitis is a benign, rare, self limitimg disease presenting with mainly cervical lymphadenopathy and fever unresponsive to antibiotics or medical treatment. A 28-year old man presented with fever and right lower quadrant abdominal pain. Physical examination showed abdominal tenderness and rebound tenderness mimicking acute appendicitis. Imaging studies showed normal appendix and other abdominal organs except enlarged multiple mesenteric lymph nodes. Symptoms persisted despite antimicrobial therapy. Multiple tender lymph nodes were palpable on bilateral cervical area at the 7th hospital day. The biopsy of the neck node showed large areas of patchy, irregular necrosis with prominent nuclear debris surrounded by T lymphocytes, histiocytes without neutrophils and granuloma, so he was diagnosed as Kikuchi- Fujimoto disease. With conservative management, clinical improvement was observed. We suggest that Kikuchi-Fujimoto disease with mesenteric lymphadenitis should be added to the differential diagnosis of acute abdomen mimicking acute appendicitis in young adults.

Low Molecular Weight Polyethylenimine-Mitochondrial Leader Peptide Conjugate for DNA Delivery to Mitochondria

Choi, Joon-Sig,Choi, Min-Ji,Go, Gyeong-Su,Rhee, Byoung-Doo,KimPak, Young-Mi,Bang, In-Seok,Lee, Min-Hyung Korean Chemical Society 2006 Bulletin of the Korean Chemical Society Vol.27 No.9

It has been found that a number of diseases are associated with mutations in the mitochondrial DNA. Therapeutic gene delivery to mitochondria has been suggested as a clinical option for these diseases. In this study, we developed a gene carrier to mitochondria by the conjugation of mitochondrial leader peptide (LP) to polyethylenimine (PEI). Mitochondrial LP conjugated PEI (PEI-LP) was synthesized with low molecular weight PEI (2,000 Da, PEI2K). Gel retardation assay showed that PEI2K-LP formed complexes at a 1.0/1 weight ratio. In addition, PEI2K-LP protected DNA from the enzymatic degradation for at least 60 min, while naked DNA was completely degraded within 20 min. PEI2K-LP was compared with LP conjugated high molecular weight PEI (25,000 Da, PEI25K) in terms of toxicity and delivery efficiency. MTT assay showed that PEI2K-LP had much lower cytotoxicity than PEI25K-LP to 293 cells. In addition, cell-free DNA delivery assay showed that PEI2K-LP delivered more DNA to mitochondria at a 1.8/1 weight ratio than naked DNA or PEI. This result suggests that PEI2K-LP may be useful for the development of mitochondrial gene therapy system with lower cytotoxicity.

성인에서 기관내삽관을 위한 Pipecuronium 일회 정주 적정 용량

최영석,윤석민,임상호,이미경,박영철,류태간 대한마취과학회 1997 Korean Journal of Anesthesiology Vol.33 No.3

Background : Studies in animals suggest that pipecuronium dose not induce hemodynamic chan-ges related to histamine release or to an effect on the autonomic nervous system. Therefore the effects of bolus administration of large doses of pipecuronium, up to 0.20 mg/kg, on the intubation condition, onset and duration of neuromuscular blockade, heart rate and blood pressure were studied during fentanyl- nitrous oxide anesthesia. Method : Forty adults were randomly assigned to receive a bolus injection of either 0.05, 0.10, 0.15, 0.20 mg/kg of pipecuronium. Neuromuscular blockade was measured using mechanomyographic activity of the adductor pollicis muscle after supramaximal stimulation of the ulnar nerve. Four subgroups of 10 patients received pipecuronium doses of 0.05, 0.10, 0.15 and 0.20 mg/kg, respectively, as an intubating dose. Results : The times of onset and clinical duration(mean sem) after each dose were as follows: 0.05 mg/kg, 2.98 0.42 and 41.5 2.42 min; 0.10 mg/kg, 1.54 0.06 and 82.9 7.48 min; 0.15 mg/kg, 1.41 0.14 and 124.8 13.1 min; 0.20 mg/kg, 1.12 0.05 and 187.1 12.8 min. The intubation condition, time of onset and duration after doses of 0.05 mg/kg were significantly different from values after the higer doses. The duration was increased with dose-increments. No dose-related changes in heart rate or blood pressure were observed. Conclusion : The authors conclude that dose of 0.10 mg/kg and over has good intubation condition clinically and large bolus dose of pipecuronium can be safely used with a significantly prolonged duration of action without hemodynamic change. (Korean J Anesthesiol 1997; 33: 453∼457)

Surface Modification of Block Copolymer Through Sulfur Containing Plasma Treatment

Choi, Sang Wook,Shin, Jae Hee,Jeon, Min Hwan,Mun, Jeong Ho,Kim, Sang Ouk,Yeom, Geun Young,Kim, Kyong Nam American Scientific Publishers 2015 Journal of Nanoscience and Nanotechnology Vol.15 No.10

<P>Some of the important issues of block copolymer (BCP) as an application to the potential low cost next generation lithography are thermal stability and deformation during pattern transfer process in addition to defect density, line edge/width roughness, etc. In this study, sulfur containing plasma treatment was used to modify the BCP and the effects of the plasma on the properties of plasma treated BCP were investigated. The polystyrene hole pattern obtained from polystyrene polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) was initially degraded when the polystyrene hole was annealed at 190 degrees C for 15 min. However, when the hole pattern was treated using sulfur containing plasmas using H2S or SF6 up to 2 min, possibly due to the sulfurization of the polystyrene hole surface, no change in the hole pattern was observed after the annealing even though there is a slight change in hole shapes during the plasma treatment. The optimized plasma treated polystyrene pattern showed the superior characteristics as the mask layer by showing better thermal stability, higher chemical inertness, and higher etch selectivity during plasma etching.</P>

Effects of Mechanical Stimulation on the Proliferation of Bone Marrow-derived Human Mesenchymal Stem Cells

Choi, Kyung-Min,Seo, Young-Kwon,Yoon, Hee-Hoon,Song, Kye-Yong,Kwon, Soon-Yong,Lee, Hwa-Sung,Park, Jung-Keug Korean Society for Biotechnology and Bioengineerin 2007 Biotechnology and Bioprocess Engineering Vol.12 No.6

To support and enhance the in vitro growth and activity of mesenchymal stem cells (MSCs), the cell culture medium may be supplemented with various proteins and factors to mimic the physiological environment in which the cells optimally proliferate and differentiate. In this study, the effects of mechanical factors on cellular metabolic responses were investigated experimentally using a bioreactor. The effects of various chemical factors, such as growth factors, cytokines, and hormones, were also investigated. Based on previous reports demonstrating the important roles of mechanical factors in the growth and activity of MSCs, we sought to evaluate the effects of mechanical stimuli on the proliferation of bone marrow-derived MSCs using a cell training bioreactor that imposed cyclic mechanical stretch, with parameters of 240 min/day, 0.03 Hz, and $5{\sim}15%$ strain. The application of cyclic stretch $(5{\sim}15%\;strain)$ to the MSCs enhanced their proliferation during the early stage(3 days), but not the late stage (14 days), of batch culture. Mechanical stretch did not increase the release of lactate dehydrogenase (LDH) from the MSCs during culture. Appropriate levels of mechanical stretch $(5{\sim}10%\;strain)$ increased collagen synthesis, but did not alter MSC stretch was able to serve as a potent positive modulator of MSC proliferation during the initial stages of culture.

갑상선 기능항진증 환자에서 인슐린감수성 및 인슐린분비능의 변화

최은진,강호철,이태희,정민영,이대호,장연진,박상선,조재현 대한내분비학회 1994 Endocrinology and metabolism Vol.9 No.2

The impairement of glucose metabolism is frequently associated in hyperthyroidism. The present study was performed to determine the effect of the thyroid hormone excess on insulin sensitivity and on insulin secretory function in vivo. Ten newly diagnosed hyperthyroid patients and fifteen healthy control subjects were subjected to frequently sampled intravenous glucose tolerance tests(FSIGT) after an overnight fast. Insulin sensitivity, represented by the insulin sensitivity index(S_1), was assessed by minimal model analysis of FSIGT data. Insulin secretion was measured by the total area under the insulin curve after glucose load. The results were as follows. 1) The K_G values, which represent glucose tolerance, were not different between the hyperthyroid patients and the normals(2.2+-0.3 vs. 2.5+-0.3%/min, p$gt;0.05). 2) S_1 was significantly decreased in the hyperthyroid patients in comparison to the normals(7.5+-1.4 vs. 2.6+-0.3X10^-4 min^-1/uU/ml, p$lt;0.05). 3) The basal insulin concentration was higher in the hyperthyroid patients than in the normals(8.3+-2.4 vs. 4.6+-0.4 uU/ml, p=0.07). In addition, the insulin secretory response to a glucose load was increased in the hyperthyroid patients as evidenced by the peak plasma insulin level(168.2+-30.4 vs. 89.2+-13.9 uU/ml, p$lt;0.05) and by the total area under the insulin curve(2641.1+-443.2 vs. 1696.7+-204.3 min uU/ml, p$lt;0.05). These results clearly demonstrated that insulin sensitivity was impaired in these newly diagnosed hyperthyroid patients. However, glucose tolerance was maintained by the increased insulin secretion (J Kor Soc Endocrinol 9:108-114, 1994).