http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이승우,이상학,여동승,이숙영,김석찬,김관형,문화식,송정섭,박성학,정은선,Lee, Seung-Woo,Lee, Sang-Haak,Yeo, Dong-Seung,Lee, Sook-Young,Lee, Seok-Chan,Kim, Kwan-Hyoung,Moon, Hwa-Sik,Song, Jeong-Sup,Park, Sung-Hak,Jung, Eun-Sun 대한결핵및호흡기학회 2002 Tuberculosis and Respiratory Diseases Vol.53 No.6
Amiodarone 폐독성은 약제 복용력이 있는 환자에서 새로운 증상과 X-선의 변화가 있을 때 의심하여야 하며 울혈성 심부전이나 폐감염증, 폐색전증, 악성종양 등과 감별하는 것이 중요하다. 진단은 임상적, 방사선학적, 조직학적 소견을 종합하여 내릴 수 있으며 대부분의 경우에는 약제 중단을 통해서 폐독성의 호전을 기대할 수 있으나 일부에서는 호흡부전으로 진행하거나 기존의 심부정맥의 재발 등으로 인하여 사망하는 경우도 있다. 저자들은 심부정맥으로 amiodarone을 사용하던 환자에서 치명적인 폐독성이 발생한 4예를 경험하였기에 이를 문헌고찰과 함께 보고하는 바이다. The lungs are frequently the site of adverse drug reactions because of their higher oxygen concentration, the distinctive properties of the pulmonary circulation, and the close proximity of the alveolar epithelium to the blood. Amiodarone, an iodinated benzofuran derivative, is an effective antiarrhythmic drug commonly used for refractory tachyarrhythmia. However, it has a wide range of adverse effects, the most serious of which is lung disease. Most patients present with the insidious onset of dyspnea and a nonproductive cough, and generally recover after withdrawing the drug. We recently experienced four fatal cases of amiodarone pulmonary toxicity. Therefore, we discuss these unusual drug-induced pulmonary toxicity cases with a review of the relevant literature.
NaOH 처리한 Fe 첨가된 Ti alloys의 아파타이트 형성관찰
이승우,김윤종,류재경,김택남,Seung-Woo Lee,Yun-Jong Kim,Jae-Gyeoung Ruy,Taik-Nam Kim 배재대학교 공학연구소 2004 공학논문집 Vol.6 No.2
현재까지 사용되어가지고 있는 임플란트 재료 중 commercially pure titanium (순수티탄; Cp-Ti)과 Ti-alloy들은 생체재료로 폭넓게 사용되어지고 있는데, Ti 금속들은 경도가 강하고 점도가 높기 때문에, 치과나 정형외과 등의 하중에 잘 견디는 곳에 이용되어지고 있다고 한다. 이것들은 생체적합성과 부식에 대한 저항성도 좋은 것으로 알려져 있다. 일반적으로 Ti은 4종류의 Grade로 강도의 차이에 의하여 분류되고 Ti의 강도에 영향을 미치는 것으로는 산소, 철, 질소등이 있다. 따라서 본 연구에서는 O와 Fe의 함량을 달리한 Ti alloy시편을 사용하여 생체적합성 실험을 하였다. 먼저 실험은 시편을 micropolishing하고 5M NaOH에서 $60^{\circ}C$에서24시간 처리하여서 비표면적을 넓혔으며, 표면의 $TiO_2$을 만들어주기 위하여 $600^{\circ}C$에서 열처리하였다. 그런 시편을 $36.5^{\circ}C$의 SBF에 넣어 1~14일까지 침적한 후에 표면에 형성된 apatite를 SEM과 EDAX로 조사하였다. 조사 결과 모든 시편에서 apatite가 생성되었지만, 시편의 조성에 따라서 apatite의 형성양이 다름을 확인하였다. Metals, ceramics and polymers are widely used as bioimplant materials. However, Ti and Ti alloys are widely used because of its high strength to weight ratio and good biocompatibility when implanted in the body. In this experiment, Ti alloys of Grade-4 (gr4), 0.2 wt % Fe, 0.5 wt % Fe and 2 wt % Fe were studied for their surface morphology and HAp forming ability on the metal substrate for different treatments. Intially, the samples were mechanically polished on silicone carbide paper (No.-2000). The polished samples were treated with 5M NaOH solution at $60^{\circ}C$ for 24 hours. The NaOH treated samples were washed gently with distill water and dried at $40^{\circ}C$ for 1 day. The dried samples were heated in air at $600^{\circ}C$ for 1 hour. The surface morphology of these samples were studied using SEM. The SEM studies showed network of pores in all samples. These samples were immersed in stimulated body fluids (SBF) kept at $36.5^{\circ}C$ for different periods over the length of 1 to 14 days. The apatite formation was confirmed on all Ti-alloys using EDAX.
이승우,오해석,Lee, Seung-Woo,Oh, Hae-Seok 한국정보처리학회 2004 정보처리학회논문지B Vol.11 No.2
영상 매칭 방법을 이용하여 항공 사진 및 위성 영상으로부터 획득한 지상 위치 및 고도 정보인 수치표고모델(DEM)은 여러 환경의 영향으로 인하여 오차를 포함하고 있다. 본 연구에서는, 전문가가 이러한 오차를 수정 편집할 수 있도록 하기 위하여 기준 수치표고모델과 대상 수치 표고모델간의 유사도 값을 사용하여 수치표고모델을 평가하는 방법을 제시하고자 한다. 수치표고모델의 전 지역에 대해 수평 및 수직 오차를 구하기 위해서는 기준 수치표고모델의 격자와 대상 수치표고 모델 격자간의 유사도 값을 사용하여 각 기준 격자에 대한 정합 대상 격자를 구한다. 각 기준 격자에 대한 정합 대상 격자가 구해지면, 수평 및 수직 오차를 계산하여 전문가가 수정 편집할 영역을 판단할 수 있도록 한다. 즉, 유사도 값이 낮고, 고도의 차가 높은 경우. 그 격자는 후보 변화 또는 오류 격자로 판단된다. 이러한 후보 격자들이 영역을 이룰 경우. 수정 편집 대상인 변화 또는 오류 지역으로 판단한다. 이러한 방법을 사용함으로써, 모든 점에 대한 평가가 가능할 뿐 아니라, 수직 오차 외에도 수평 오차를 구할 수 있으므로, 보다 효과적으로 변화 또는 오류 지역을 찾을 수 있었다. The ground positions and elevations information called DEMs(Digital Elevation Models) which are extracted from the stereo aerial photographs and/or satellite images using image matching method have the natural errors caused by variant environments. This study suggests the method to evaluate DEMs using correlation values between the reference and the target DEMs. This would be strongly helpful for experts to correct these errors. To evaluate the whole area of DEMs in the horizontal and vertical errors, the target cell is matched for each reference cell using the correlation values of these two cells. When the target cell is matched for each reference cell, horizontal and vertical error was calculated so as to help experts to recognize a certain area of DEMs which should be corrected and edited. If the correlation value is low and tile difference in height is high, the target cell will be candidated as changed or corrupted cell. When the area is clustered with those candidated cells, that area will be regarded as changed or corrupted area to be corrected and edited. Using this method, the evaluation for all DEM cells is practicable, the horizontal errors as well as vertical errors is calculable and the changed or corrupted area can be detected more efficiently.