자발형성 양자점 성장 기술 동향

김정섭,양창재,윤의준,Kim, Jeong-Seop,Yang, Chang-Jae,Yun, Eui-Jun 한국전기전자재료학회 2008 전기전자재료 Vol.21 No.4

복합적 한방 치료를 시행한 마미증후군 수술 실패 환자 1례에 대한 증례 보고

김정섭,조성우,Kim, Jung-Sup,Cho, Sung-Woo 척추신경추나의학회 2015 척추신경추나의학회지 Vol.10 No.2

Objectives : The purpose of this study is to evaluate clinical effect of Korean medical treatments for the patient who were diagnosed as the Cauda Equina Syndrome. Methods : The patient was treated by Korean medical treatments including acupuncture, pharmacopuncture, herbal medication. The Improvement of clinical symptoms was assessed by Visual Analog Scale(VAS), Oswestry Disability Index(ODI) and Muscle Manual Test(MMT). Results : After treatments, VAS and ODI were generally decreased, MMT was improved in case. Conclusions : The Oriental medical treatments might be effective methods to treat the patient who were diagnosed as the Cauda Equina Syndrome.

에러 심볼 검출기를 이용한 주파수 도약용 비트 동기방식

김정섭,황찬식,Kim, Jung-Sup,Hwang, Chan-Sik 대한전자공학회 1999 電子工學會論文誌, S Vol.s36 No.7

본 논문에서는 주파수 도약 방식 시스템에 적합한 비트 동기 방식을 제안한다. 제안한 비트 동기 방식은 에러 심볼 검출기를 고안하여 이를 기존의 디지털 루프 필터와 결합한 ADPLL 방식이다. 제안된 비트 동기방식은 홉류트 잡음과 임펄스 잡음 등과 같은 잡음 구간에서는 비트 추적을 억제함으로써 디지털 루프 필터의 성능을 향상시키고, 주파수 도약 시스템에서의 동기 확률을 개선시켰다. 모의 실험 결과, 제안한 비트 동기 방식이 기존의 방식에 비해서 더욱 개선된 성능을 보여줌을 입증하였다. In this paper, we propose a bit synchronizer which is suitable for frequency hopping systems. The proposed bit synchronizer is an ADPLL in which the digital loop filter is combined with an error symbol detecting circuit. Suppressing the tracking process, when hop mute and impulse noises are detected, improves the performance of the digital loop filter and enhances the probability of the frequency hopping system. Simulation results demonstrate an improved performance of the proposed bit synchronizer compared with existing ones.

섬유시트로 보강된 철근콘크리트 기둥의 압축강도 특성에 관한 실험적 연구

김정섭,최진석,조철희,고송균,Kim, Jeong-Sup,Choi, Jin-Seok,Cho, Cheol-Hee,Go, Song-Kyoon 한국건축시공학회 2003 한국건축시공학회지 Vol.3 No.2

Test specimen test was performed using concrete reinforced with fiber sheet and the test variables were based on the kinds of fiber and the number of reinforcement layers. Using steel-concrete reinforced with fiber sheet, compression tests were performed and the test variables were the kinds of fiber, number reinforcement layers and reinforcement layer order. The following results were obtained: 1) It was demonstrated that compressive strength of the test specimen reinforced during test specimen test and member test increased as the number of reinforcement layers increased. 2) It was shown that non-reinforced test, specimen were destroyed during the member tests, but the specimen reinforced with CFS destroyed and the GFS-reinforced specimen and composite reinforced specimen showed ductile destruction. 3) As a result of tests on kinds of reinforcement fiber, it was demonstrated that CFS-reinforced test specimen had higher compressive strength in a 공시체 test. In the member test, 2ply-and 3ply-GFS reinforced specimens except lplied one had higher compressive strength. It was because partial destruction occurred due to the rate of height/section. 4) For layer strength order, compared with test specimen reinforced only with a single reinforced material, test specimen reinforced with CFS and GFS, and test specimen reinforced with CFS first showed better results in compressive strength and ductility judgement.

전단보강근이 없는 섬유보강 철근콘크리트 보의 특성에 관한 실험적 연구

김정섭,고송균,최진석,Kim, Jeong-Sup,Go, Song-Kyoon,Choi, Jin-Seok 한국건축시공학회 2003 한국건축시공학회지 Vol.3 No.3

This study examines the material characteristics of fibers and their influences on reinforced concrete through the tests of reinforced concrete by the types of fibers including non-reinforced, steel, polypropylene and cellulose fibers and the test of compressive strength and reinforced concrete beam without shear reinforcement and consequently it obtains the following conclusions. As a result of conducting compressive strength by the types of specimens, fiber reinforced specimen with the highest compressive strength value at 28 days of age was cellulose fiber reinforced specimen as 280.4kgf/$\textrm{cm}^2$ and steel fiber specimen had the highest compressive strength of 250.7kgf/$\textrm{cm}^2$ at 180 days of age. In case of non-reinforced specimen, its compressive strength was 277.4kgf/$\textrm{cm}^2$ at 28 days of age and 273.1kgf/$\textrm{cm}^2$ at 180 days of age. Comparing the compressive strength of non-reinforced specimen to that fiber reinforced specimen showed that the compressive strength of fiber reinforced specimen was lower in the passage of age and the results of this experiment showed no effects of fiber reinforcement. As a result of testing reinforced concrete beam without shear reinforcement, ductility factors of specimens were 4.67 for non-reinforced specimen, 8.18 for steel fiber reinforced specimen, 6.20 for polypropylene fiber reinforced specimen and 5.49 for cellulose reinforced specimen, and it is found that steel fiber reinforced specimen was highest. When non-reinforced specimen and steel fiber reinforced specimen were compared, steel fiber reinforced specimen had higher ductility factor of about 75.2% than that of non-reinforced specimen.

섬유보강 철근콘크리트 보의 강도특성에 관한 실험적 연구

김정섭,박영배,Kim, Jeong-Sup,Park, Young-Bae 한국건축시공학회 2003 한국건축시공학회지 Vol.3 No.1

This study aims to provide basic data that can be applied to construct real structures. For this, an experimental structure was manufactured to identify durability according to age of fiber-reinforced concrete which contains fiber reinforcement materials (polypropylene fiber, steel fiber, cellulose fiber) and structural property about flexural behavior and destruction of reinforced concrete beam, and a relation between load and deflection, crack and destruction according to increase of load and ductility capacity was examined. Fiber-reinforced concrete materials and other constructional materials were experimented and the result is presented as follows: The results obtained through material test of concrete and static experiment of members usings 1. The experiment shows that compressive strength of fiber-reinforced concrete was lower than that of non-reinforced concrete. 2. As a result of strength experiment according to different kinds of fiber, compressive strength of an experimented structure that contains cellulose fiber was the highest when age was 28. 3. When deflection of reinforced concrete beam was examined, it was reported that ductility capacity of the experimented structure that contains fiber-reinforced concrete was raise than that of non-reinforced concrete.

소아에서 발생한 안와의 B-세포 림프모구성 림프종 1예

김정섭,노창래,도상희,박경신,양석우,Jung Sub Kim,M,D,Chang Rae Rho,M,D,Sang Hee Doh,M,D,Gyeong Sin Park,M,D,Suk Woo Yang,M,D 대한안과학회 2007 대한안과학회지 Vol.48 No.1

Purpose: We report a case of orbital B-cell lymphoblastic lymphoma in a 7-year-old boy. Methods: A 7-year-old boy presented with proptosis and periorbital swelling of his left eye following a periorbital blunt trauma 1-month prior. During the course of routine ophthalmologic and radiologic examinatinos, the swelling spontaneously subsided without specific treatment. An outpatient follow-up was planned, but the swelling recurred 6 months later. An orbital CT and MRI showed an irregular mass with an indistinct margin in the left orbit, for which an incisional biopsy was performed. Results: The orbital mass consisited of monotonous small to medium sized lymphoid cells with evenly dispersed open chromatin, thin nuclear membrane and inconspicuous nucleoli. Immunohistochemistry revealed that the cells were positive for CD79a and TdT, but negative for CD3 and CD5. These findings were compatible with a diagnosis of B cell lymphoblastic lymphoma. Conclusions: Lymphoblastic lymphoma of the orbit should be suspected and considered in the differential diagnosis for children with acutely progressing orbital mass.

팩시밀리용 비정질 실리콘 광도전막의 제작 및 특성

김정섭,오상광,김기완,이우일,Kim, Jeong-Seob,Oh, Sang-Kwang,Kim, Ki-Wan,Lee, Wu-Il 대한전자공학회 1989 전자공학회논문지 Vol. No.

밀착형 1차원 영상감지소자로서 팩시밀리에 사용될 광도전막을 사일랜듸 글로방전 분해법으로 제작하였다. 우선 rf전력, 사일랜유량, 분위기 가스압, $H_2/SiH_4$비 및 기판온도의 증착조건에 따른 단층광전도막의 전기적 및 광학적특성을 조사하였다. 이 단층구조 영상감지막은 광전감도 0.85와 100lux 조도하에서 $I_{ph}/I_d=100$을 나타내었다. 그러나 이러한 단층박막은 양 전극으로 부터의 캐리어주입으로 인해 큰 암전류도 0.2nA 이하를 나타내었다. 또한 다층막은 단층막에 비해 단파장 가시광영역이 보상되어 팩시밀리용 1차원 영상감지소자에 사용될 만한 결과를 나타내었다. Contact-type linear image sensors for facsimile have been fabricated by means of rf glow discharge decomposition method of silane. The dependence of their electrical and optical properties on rf power, $SiH_4$ flow rate, ambient gas pressure, $H_2SiH_4$ ratio and substrate temperature are described. The a-Si:H monolayer demonstriated photosensitivity of 0.85 and $I_{ph}/I_d$ ratio of 100 unger 100 lux illumination. However, this monolayer has relatively high dark current due to carrier injection from both electrodes, resulting in low $I_{ph}/I_{dd}$ ratio. To suppress the dark current we have fabricated $SiO_2/i-a-Si:H/p-a-Si:H:B$ multilayer film with blocking structure. The photocurrent of this multilayer sensor with 6 V bias became saturated ar about 20nA under 10 lux illumination, while the dark current was less than 0.2 nA. Moreover, the spectral sensitivity of the multilayer film was enhanced for short wavelength visible region, compared with that of the a-Si:H monolayer. These results show that the fabricated photocon-ductive film can be used as the linear image sensor of the facsimile.

비선형 함수 연산을 위한 FPGA 기반의 부동 소수점 프로세서의 설계

김정섭,정슬,Kim, Jeong Seob,Jung, Seul 대한임베디드공학회 2008 대한임베디드공학회논문지 Vol.3 No.4

This paper presents the hardware design of a 32bit floating point based processor. The processor can perform nonlinear functions such as sinusoidal functions, exponential functions, and other mathematical functions. Using the Taylor series and Newton - Raphson method, nonlinear functions are approximated. The processor is actually embedded on an FPGA chip and tested. The numerical accuracy of the functions is compared with those computed by the MATLAB and confirmed the performance of the processor.

유기금속화학기상증착법을 이용한 적층 InAs 양자점 적외선 수광소자 성장 및 특성 평가 연구

김정섭,하승규,양창재,이재열,박세훈,최원준,윤의준,Kim, Jung-Sub,Ha, Seung-Kyu,Yang, Chang-Jae,Lee, Jae-Yel,Park, Se-Hun,Choi, Won-Jun,Yoon, Eui-Joon 한국진공학회 2010 Applied Science and Convergence Technology Vol.19 No.3

유기금속화학기상증착법으로 적층 InAs/$In_{0.1}Ga_{0.9}As$ DWELL (dot-in-a-well) 구조를 성장하여 n-i-n 구조의 적외선 수광소자를 제작하였으며, PL (photoluminescence) 발광 특성 및 암전류 특성을 분석하였다. 동일한 조건으로 양자점을 적층하였을 때 크기 및 밀도의 변화에 의한 이중 PL peak을 관찰하였으며, TMIn의 유량을 조절함으로써 단일 peak을 갖는 균일한 크기의 양자점 적층 구조를 성장할 수 있었다. 적외선 수광소자 구조를 성장함에 있어서, 상부의 n-형 GaAs의 성장 온도가 600도 이상인 경우 PL 발광 세기가 급격히 감소하였고 이에 따른 암전류의 증가를 관찰하였다. 0.5 V 인가 전압에서 암전류의 온도 의존성에 대한 활성화 에너지의 크기는 성장온도가 580도인 경우 106 meV이고, 650도의 경우는 48 meV로 급격이 낮아졌다. 이는 고온의 성장 온도에 의한 InAs 양자점과 $In_{0.1}Ga_{0.9}As$ 양자우물구조 계면에서의 열적 상호 확산에 의하여 비발광 천이가 증가되었기 때문이다. We grew multi-stacked InAs/$In_{0.1}Ga_{0.9}As$ DWELL (dot-in-a-well) structure by metal organic chemical vapor deposition and investigated optical properties by photoluminescence and I-V characteristics by dark current measurement. When stacking InAs quantum dots (QDs) with same growth parameter, the size and density of QDs were changed, resulting in the bimodal emission peak. By decreasing the flow rate of TMIn, we achieved the uniform multi-stacked QD structure which had the single emission peak and high PL intensity. As the growth temperature of n-type GaAs top contact layer (TCL) is above $600^{\circ}C$, the PL intensity severely decreased and dark current level increased. At bias of 0.5 V, the activation energy for temperature dependence of dark current decreased from 106 meV to 48 meV with increasing the growth temperature of n-type GaAs TCL from 580 to $650^{\circ}C$. This suggest that the thermal escape of bounded electrons and non-radiative transition become dominant due to the thermal inter-diffusion at the interface between InAs QDs and $In_{0.1}Ga_{0.9}As$ well layer.