http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이재천(J. C. Lee),오상흔(S. H. Oh) 유공압건설기계학회 2009 드라이브·컨트롤 Vol.6 No.1
This study presents an analytical model of an automotive steeling hose containing tuner(flexible spiral metal tube) to reduce the ripple pressure induced by steering vane pump. The double-wall side branch composed in a steering hose containing tuner was analogically considered as a filter in a conduit. Specialized test equipment was manufactured for the estimation of speed of sound in a conduit and measurement of amplitude ratio between the propagated ripple pressures of inlet and outlet of the steering hose. Experimental data of entire frequency ranges can be obtained through the test once in short time. The results of three points’ measurement method and cross-correlation method to estimate the speeds of sound in a hose, tuner, and side branch respectively reveal that cross-correlation method can be used practically. The results of simulation and experiment were so close, especially in the range of engine idling speed, that the proposed analytical model in this study was validated. Sensitivity analyses and experiments show that longer tuner is preferable, and that the positive-positive composition of the steering hoses containing tuner is superior to others to attenuate ripple pressure.
Gibbs 선행치를 사용한 배열된부분집합 기대값최대화 방출단층영상 재구성방법에 관한 연구
임기천,최용,김종호,이수진,우상근,서현관,이경현,감상흔,최연성,박장춘,김병태,Im, K. C.,Choi, Y.,Kim, J. H.,Lee, S. J.,Woo, S. K.,Seo, H. K.,Lee, K. H.,Kim, S. E.,Choe, Y. S.,Park, C. C,Kim, B. T. 대한의용생체공학회 2000 의공학회지 Vol.21 No.5
방출단층영상 재구성을 위한 최대우도 기대값최대화(maximum likelihood expectation maximization, MLEM) 방법은 영상 획득과정을 통계학적으로 모델링하여 영상을 재구성한다. MLEM은 일반적으로 사용하여 여과후역투사(filtered backprojection)방법에 비해 많은 장점을 가지고 있으나 반복횟수 증가에 따른 발산과 재구성 시간이 오래 걸리는 단점을 가지고 있다. 이 논문에서는 이러한 단점을 보완하기 위해 계산시간을 현저히 단축시킨 배열된부분집합 기대값최대화(ordered subsets expectation maximization. OSEM)에 Gibbs 선행치인 membrance (MM) 또는 thin plate(TP)을 첨가한 OSEM-MAP (maximum a posteriori)을 구현함으로써 알고리즘의 안정성 및 재구성된 영상의 질을 향상시키고자 g나다. 실험에서 알고리즘의 수렴시간을 가속화하기 위해 투사 데이터를 16개의 부분집합으로 분할하여 반복연산을 수행하였으며, 알고리즘의 성능을 비교하기 위해 소프트웨어 모형(원숭이 뇌 자가방사선, 수학적심장흉부)을 사용한 영상재구성 결과를 제곱오차로 비교하였다. 또한 알고리즘의 사용 가능성을 평가하기 위해 물리모형을 사용하여 PET 기기로부터 획득한 실제 투사 데이터를 사용하였다.
이식형 인공 중이를 위한 일체형 진동 트랜스듀서의 탄성체 특성
이긴찬,송병섭,김명남,조진호,이상흔,박세광 경북대학교 센서기술연구소 1998 센서技術學術大會論文集 Vol.9 No.1
Floating type vibration transducer for an implantable middle ear hearing aid was designed and fabricated. This transducer has a small size and one-body structure with malleus to be easily implanted. To investigate the characteristics of elastic materials that play a key role in the performance of hearing aid. Model 1, 2 and 3 was presented and they have a silicon diaphragm, 4-beam and the rubber as elastic material. Through the experiment, model 1, 2 and 3 show 13, 1.7 and 6.2kHz of the natural resonance frequency. Furthermore, this paper presents the feasibility of micromachining technology for the vibration transducer with the small, light and high efficiency.
조진호,박일용,임형규,윤영호,성기웅,정의성,한지훈,김민규,이상흔 한국장애인재활협회 2006 재활복지 Vol.10 No.3
인구의 고령화가 진행되면서 난청인구는 증가하고 있으며 난청자들은 일반적으로 공기전도형 보청기를 사용하고 있다. 이러한 보청기는 미용문제와 귀 폐쇄감 및 하울링 현상 등으로 인해 난청자들이 기피하고 있으며, 이를 극복하기 위한 방법으로 완전히 은닉할 수 있고 음향 피드백의 영향이 적은 완전 이식형 인공중이 시스템이 전 세계적으로 주목받고 있다. 경북대 첨단 감각기능 회복장치연구센터(Advanced Research Center for Recovery of Human Sensibility, ACRHS)는 보건복지부의 지원과 (주)파이컴의 참여 하에, 약 4년간의 연구 결과로 차동 전자 트랜스듀서를 기반으로 하는 완전 이식형 인공중이 시스템의 시제품 ACROHS-1.5와 그 주변장치로 무선 제어기 및 무선 충전장치를 각각 구현하고 실험을 통해 평가하였다. 현재는 제작된 시제품을 기반으로 한국식품의약품안전청 (KFDA)의 시험을 받기 위한 준비과정에 있다. Recently, persons who have difficulty in hearing are increase as aging of population, conventional hearing aids are generally used by them. In contrast with conventional hearing aids, implantable middle ear hearing devices (IMEHDs) with the advantages of complete concealment, occlusion of ear, and reduction of acoustic feedback are remarkable methods to overcome difficulties of people who have from moderate hearing loss to severe hearing loss. At Advanced Research Center for Recovery of Human Sensibility (ACRHS) in Kyungpook National University (KNU) under the auspices of Korean Ministry of Health & Welfare (KMHW) and PHICOM Co, as the products of their research during 4 years, fully implantable middle ear hearing device (ACROHS-1.5) based on a differential floating mass transducer (DFMT), an implantable microphone, a remote controller, and a wireless charger have been implemented. Each prototype has been evaluated through several experiments. In the present time, we are going to prepare clinical trials for approval of Korean Food and Drug Administration (KFDA).