http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
CO<sub>2</sub> 배출비용을 고려한 발전소의 연료교체 경제성에 대한 연구
이상중,정영호,Lee, Sang-Joong,Jeong, Yeong-Ho 한국조명전기설비학회 2009 조명·전기설비학회논문지 Vol.23 No.2
일본 도야코에서 2008년 7월 열린 G8 정상회의에서 2050년까지 전세계 온실가스 배출량을 절반으로 줄이는 장기 목표를 추진하는 방안이 논의되었다. 우리나라도 2013년부터 기후협약 규제가 거의 확실시되고 있다. 화석연료의 연소로 대부분의 전력을 생산하는 발전산업은 우리나라 $CO_2$ 대기배출량의 20[%] 이상을 차지하고 있다. 발전소의 화석연료의 소모와 이에 따른 $CO_2$ 대기배출 규제는 갈수록 엄격해 질 전망이며 전력생산단가에 크게 영향을 끼칠 것이다. 본 논문은 발전소의 연료교체 검토 시 $CO_2$ 배출비용을 감안하는 간단한 경제성 검토를 수행하였다. 중유전소 발전소인 D 발전소가 LNG로 연료전환을 고려할 경우, 발전비용이 같아지는 ton당 $CO_2$ 배출비용, 즉, LNG-중유 연료교체의 손익분기점에 해당하는 ton당 $CO_2$ 배출비용을 계산하는 방법과 예제를 제시하였다. 이를 위하여 D 발전소의 성능시험 결과 얻어진 입출력 특성계수를 이용하였다. With respect to the goal of achieving at least 50[%] reduction of global emissions by 2050, the G8 leaders agreed to seek to share and adopt it with all Parties to the UNFCCC in the 34th Group of Eight Summit held in Toyako, Japan in July 2008. Korea is also expected to obey the Kyoto Protocol starting in 2013, which will result in a serious shock especially to the electric power industry. The power plants burning the fossil fuel produce more than 20 percent of national $CO_2$ emission. This paper presents an economic feasibility study on fuel transfer for a thermal power plant considering $CO_2$ emission cost. Calculation of the breakeven point for the fuel transfer from LNG to heavy oil of D power plant is demonstrated using the input-output coefficients obtained by the performance test.
위상각기준의 이동을 통한 새로운 패널티 계수의 계산방법
이상중,Lee, Sang-Joong 대한전기학회 2001 전기학회논문지A Vol.50 No.1
In this paper, a new method for calculating the penalty factors of all generators including the slack bus is presented. A simple transposition of the angle reference, from the conventional slack bus to another bus where no generation exists, enables the derivation of the loss sensitivity of the slack bus. Penalty factors are obtained without any physical assumption through a simple substitution of the bus loss sensitivities. Penalty factors calculated by proposed method are not dependent on reference bus and can also be directly substituted into the general ELD equation for computing the optimal dispatch. Equations for loss sensitivities, Penalty factors and ELD are calculated simultaneously in normal power flow computation. A case study on a test system has proved the effectiveness of the proposed' angle reference transposition' method.
탄화규소 단결정의 폴리타입 안정화를 위한 종자정 표면특성 연구
이상일,박미선,이도형,이희태,배병중,서원선,이원재,Lee, Sang-Il,Park, Mi-Seon,Lee, Doe-Hyung,Lee, Hee-Tae,Bae, Byung-Joong,Seo, Won-Seon,Lee, Won-Jae 한국전기전자재료학회 2013 전기전자재료학회논문지 Vol.26 No.12
SiC crystal ingots were grown on 6H-SiC dual-seed crystals with different surface roughness and different seed orientation by a PVT (Physical Vapor Transport) method. 4H and 15R-SiC were grown on seed crystal with high root-mean-square (rms) value. The polytype of grown crystal on the seed crystal with lower rms value was confirmed to be 6H-SiC. On the other hand, all SiC crystals grown on seed crystals with different seed orientation were proven to be 6H-SiC. The surface roughness of seed crystals had no effect on the crystal structure of the grown crystals. However, the crystal quality of 6H-SiC single crystals grown on the on-axis seed were revealed to be slightly better than that of 6H-SiC crystal grown on the off-axis seed.
링레이저 자이로 기반 2축 회전형 관성항법장치 오차해석에 대한 연구
김천중(Cheon-Joong Kim),유해성(Hae-Sung Yu),이인섭(In-Seop Lee),오주현(Ju-Hyun Oh),이상정(Sang-Jeong Lee) 한국항공우주학회 2018 韓國航空宇宙學會誌 Vol.46 No.11
관성항법장치 순수항법 성능을 개선하는 방법으로 관성센서 오차가 상호 상쇄되도록 관성센서뭉치를 회전시켜 항법 성능을 개선하는 방법이 있으며 이러한 원리로 동작하는 항법장치를 회전형 관성항법장치라 한다. 관성센서 오차에 의한 회전형 관성항법장치의 정확한 항법 성능 분석을 위해서는 이에 대한 이론적 오차해석이 요구되나 기존의 많은 연구에서는 지구회전 각속도 및 중력 가속도에 의한 영향을 무시하고 오차해석을 수행하여 회전형 관성항법장치의 정확한 항법 성능 분석이 수행되지 않았다. 본 논문에서는 링레이저 자이로 기반 회전형 관성항법장치의 정확한 항법 성능 분석을 위하여 지구회전 각속도 및 중력 가속도 항을 포함한 이론적인 오차해석을 수행하고 이를 기반으로 회전형 관성항법장치의 항법 성능 분석 결과를 제시하였다. There is a method to enhance the pure navigation performance of INS(Inertial Navigation System) through the rotation of inertial measurement unit to compensate error sources of inertial sensors each other and that INS using this principle of operation is called rotational INS. In this paper, the exact error analysis of rotational INS based on ring laser gyro considering the coupling effect with gravity and earth rate is performed to evaluate the navigation performance by inertial sensor error sources. And error analysis and performance evaluation result confirmed by modelling and simulation is also proposed in this paper.
김인중,박철우,이상조,Kim, In-Joong,Park, Cheol-Woo,Lee, Sang-Jo 대한기계학회 1996 大韓機械學會論文集A Vol.20 No.12
In this study, the ways of calculating the efficiency of ball screws are presented to fix the design variables effectively. To calculate the efficiency of ball screws, the frection coefficient is needed to be deduced. Therefore it is deduced measuring the preload torque of double nut ball screws of which the preload can be varied by springs. The efficieny of ball screws and the mazimum efficiency condition are calculated with the deduced friction coefficient. In addition, the characteristic of friction and lubrication is considered.
이상중,Lee, Sang-Joong 한국군사과학기술학회 2013 한국군사과학기술학회지 Vol.16 No.3
Faster and cheaper transportation of the war supplies to the frontlines is essential for winning a war. This paper proposes a method to select the optimal location of the strategic military base, e.g., the Quartermaster Corps, that minimally connects three frontlines using the optimization technique. The results are also compared to the Steiner Tree theoty.
이상중(Sang-Joong Lee),양성덕(Seong-Deog Yang) 한국조명·전기설비학회 2004 한국조명·전기설비학회 학술대회논문집 Vol.2004 No.11월
Though the reference angie has been specified conventionally on the slack bus, it can be specified on any bus in the system without changing power flow solutions. This paper describes that the loss sensitivity of the slack bus can be obtained through an angle reference transposition. A concept of two reference buses, consisting of "power slack bus"