http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유형수,노범석,강석용,서성민,정동호 해양환경안전학회 2022 해양환경안전학회지 Vol.28 No.5
The number of ships using liquefied natural gas (LNG) as fuel is increasing to respond to the International Maritime Organization’s (IMO) air pollutant emission regulations. At the same time, the need to expand LNG bunkering infrastructure for stable fuel supply and demand for ships is emerging. LNG bunkering is carried out in three ways: truck to ship (TTS), pipe to ship (PTS), and ship to ship (STS). In foreign countries, all three methods are being carried out, but in Korea, LNG bunkering is carried out only with the TTS method owing to the lack of infrastructure. LNG bunkering is a high-risk operation. For safe bunkering operations, the competence of the workers is extremely important, and a professional training course is required to strengthen the competence. This study was conducted to design training contents for LNG bunkering workers for fostering LNG bunkering experts and performing safe and systematic bunkering work. To this end, the current status of LNG-fueled ships and bunkering was identified, and related domestic and abroad educational contents were analyzed. In addition, opinions on the importance of educational contents were collected through expert questionnaires. Consequently, we designed training contents suitable for various training targets and divided them into basic and advanced training courses, with a duration of 4 days, and proposed. Based on the designed training contents, if additional research is conducted by sufficiently reflecting Korea’s bunkering environment, it will be of great help to improve the competence of LNG bunkering workers and to foster human resources. 국제해사기구(IMO)의 대기오염물질 배출 규제에 대응하기 위해 액화천연가스(LNG)를 연료로 사용하는 선박이 증가하고 있다. 이와 함께 선박의 안정적인 연료 수급을 위한 LNG 벙커링 인프라 확대의 필요성이 대두되고 있다. LNG 벙커링은 TTS(Truck to ship), PTS(Pipe to ship), STS(Ship to ship) 3가지 방식으로 진행된다. 외국에서는 3가지 방식 모두 진행하고 있지만, 국내의 경우 인프라 부족으로 TTS 방식으로만 LNG 벙커링이 진행되고 있다. LNG 벙커링은 위험 요소가 많은 작업으로 안전한 벙커링 작업을 위해 작업 종사자의 역량이 아주 중요하며 역량 강화를 위한 전문교육과정이 필요하다. 본 연구는 LNG 벙커링 전문인력 육성과 안전하고 체계적인 벙커링 작업 수행을 목적으로 LNG 벙커링 종사자 교육 콘텐츠를 설계하기 위해 진행되었다. 이를 위해 LNG 연료추진선박 및 벙커링 현황을 파악하고 국내외 관련 교육내용을 분석하였다. 더불어 전문가 설문을 통해 교육내용의 중요성에 대한 의견을 수렴하였다. 연구의 결과로서 다양한 교육 대상에 적합한 교육 콘텐츠 설계를 하고, 이를 총 4일이 소요되는 기초교육과 상급교육 과정으로 구분하여 제안하였다. 설계된 교육 콘텐츠를 바탕으로 우리나라 벙커링 환경을 충분히 반영하여 추가 연구가 진행된다면 LNG 벙커링 종사자 역량 증진을 도모하고 인적 자원 육성에 큰 도움이 될 것으로 사료 된다.
Sub-Harmonic 혼합기를 이용한 점대점 시스템용 하향 변환기에 관한 연구
민준기,김현진,김용환,유형수,윤호석,이근태,홍의석,Min Jun-Ki,Kim Hyun-Jin,Kim Yong-Hwan,Yoo Hyung-Soo,Yun Ho-Seok,Lee Keun-Tae,Hong Ui-Seok 한국통신학회 2005 韓國通信學會論文誌 Vol.30 No.10A
본 논문은 Sub-harmonic 혼합기 구조에서 국부발진기(Local Oscillator) 포트에 넓은 대역에 걸쳐서 변환손실을 최적화 하는 정합회로를 적용하였다. 이러한 Sub-harmonic 혼합기를 이용하여 점대점 시스템용 하향 변환기를 설계 및 제작하였다. 제안된 구조의 Sub-harmonic 혼합기는 국부발진기입력전력이 12 dBm일 때 최적으로 11.8 dB의 변환손실을 얻었으며, 격리특성은 40dB이하의 특성을 나타내었다. 전체 하향 변환기의 특성으로 IF 출력 평탄도는 2dB이하의 특성을 나타내었으며, 전체 잡음지수로는 5.9dB이하의 특성을 얻었다. In this thesis, the matching network at the local oscillator port of the sub-harmonic mixer is optimized for reducing the conversion loss. A downconverter for point to point system applications is designed and fabricated using the such sub-harmonic mixer. The sub-harmonic mixer achieved the conversion loss of 11.8 dB at the 12 dBm input power of the local oscillator and the isolation of less than -40 dB. The downconverter achieved the IF output power flatness of 2 dB and the total noise figure of 5.9 dB.
김용환,김현진,민준기,유형수,이형규,홍의석 한국ITS학회 2005 한국ITS학회논문지 Vol.4 No.2
본 논문에서는 도플러 레이더 시스템의 신호원이 되는 전압제어 발진기를 설계 및 제작하였다. 제안된 VCDRO는 CPW라인 형태를 이용하여 동조시키는 새로운 방법을 이용하였다. 유전체 공진기 기판 됫면에 바랙터 다이오드가 실장된 /2 길이를 갖는 CPW 회로를 구현하여 유전체공진기와 커플링을 시켰다. 바랙터 다이오드는 CPW 한쪽 끝에 실장을 하였다. 제안된 CPW 동조회로는 여러 개의 다이오드를 실장 할 수 있어 동조대역폭을 쉽게 늘일 수 있다. 동조된 전압제어 발진기는 바랙터 다이오드의 전압을 015V 로 가변시 12MHz 의 동조대역폭을 나타내었다. 제안된 CPW라인으로 동조된 위상고정 유전체 발진기는 10.5250Hz에서16.5dBm의 출력을 나타내었으며, 위상잡음은 -l15dBc/Hz@100kHz,-105dBcHz@10kHz,-102dBc/@1kHz 의 위상잡음 특성을 나타내었다. In this paper, a VCDRO(Voltage Control Dielectirc Resonator Oscillator) for signal source of doppler radar system is designed and fabricated. The proposed VCDRO is made with new tuning mechanism using CPW line. The coplanar waveguide of /2 in length with varactor diode is placed on the metallization side under the dielectric resonator and coupled to it. Tuning varactor diode is mounted at one end of the CPW. The proposed circuit tuned by a CPW allows one more varactor diode to be mounted on the optimized CPW, where a greater sensitivity of frequency tuning is needed. With varying the biasing voltage for the varactor diode from 0 V to 15 V, output frequency tuning of 12 MHz is obtained. The PLDRO exhibits output power of 16.5 dBm with phase noise in the phase locked state characteristic of -115 dBc/Hz at 100 Hz, -105 dBc/Hz at the 10 kHz, and -102 dBc/Hz at 1 Hz offset from 10.525 GHz , respectively.
Chip 소자를 이용한 SSPA 설계 및 제작에 관한 연구
김용환,민준기,김현진,유형수,이형규,홍의석 한국ITS학회 2003 한국ITS학회논문지 Vol.2 No.2
본 연구를 통하여 MMC(Microwave Micro Cell)를 위한 무선 중계 시스템과 ITS용 무선장비등에 사용 될 수있는 6단의 하이브리드 전력증폭기를 설계 및 제작하였다. 전력 증폭기 각단의 능동소자는 bare chip 형태의 Hetero-junction Power FET를 이용하였으며, =9.9, 15-mil 두께의 알루미나기판을 사용하여 제작하였다. 측정 결과 시스템의 순방향 주파수인 17.6GHz - 17.gGEU에서 33.2~36.5dB의 소신호 이득과 33.034.0dBm까지의 출력전력을 얻었고, 역방향 주파수인 19.0GHt19.2GHz에서 36.037.0dB의 소신호 이득을 출력전력은 33.034.5dBm을 얻었다. In this work a 6-stage hybrid power amplifier which can be used for the wireless communication systems for MMC(hficrowave Micro Cell) and ITS wireless communication system is designed and fabricated. Ihe power amplifier's each stages was fabricated Hetero-junction Power FET of bare chip type and an alumina substrate with =9.9 and 15-mil thickness. The measured results of power amplifier module showed 33.236.5 dB small signal gain, 33.034.0 dBm output power at forward frequency (17.6 GHa 17.9 CHz) and 36.037.0 dB small signal gain, 33.034.5 dBm output power at reverse frequency (19.0 GHz 19.2GHz).