http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
군 발생 폐기물의 친환경적 관리를 위한 평가 매뉴얼 구축방안
박충우,서상욱,이찬식,김인호,Park Chung-Woo,Suh Sang-Wook,Lee Chan-Sik,Kim In-Ho 한국건설관리학회 2004 건설관리 : 한국건설관리학회 학회지 Vol.5 No.4
본 연구에서는 최근 군 건설사업의 추진과정에서 그 중요성이 부각되어 온 환경친화적 관점에서 폐기물 관리방안에 대하여 고찰하였다. 그동안 건설사업을 추진하면서 발생되는 환경관련 문제에 대한 해결은 발생한 환경오염 요소의 처리와 사후관리에 중점을 두고 있었다. 즉, 환경오염요소의 발생단계에서부터 원천적으로 발생량을 최소화하는 사전 예방적 접근에 대해서는 미흡한 실정이다. 따라서 이 연구에서는 폐기물 분야의 환경관련법에 대한 체계적 분석과 이를 통한 각 사업단계별 중점 검토사항의 설정으로 환경관련규정을 준수하고, 발생 폐기물의 친환경적 관리를 위한 도구로 평가 매뉴얼을 구축하고자 한다. 이를 위해 관리를 효과적으로 이행할 수 있는 도구로서 새로운 형태의 체크리스트 및 매뉴얼을 제시하였다. The purpose of this study is to develop checklist and manual in order to control and manage military construction project in an environmentally friendly way during each stage in construction. The main contents of the study are as follows. 1) Checklists and manual are developed for reviewing the construction project in advance to meet environment codes and regulations during each stage of project. 2) Critical check points of environment management program focused on waste are identified. 3) A new construction paradigm in harmony with sound environment is established through the application of program for proactive waste control. The study also recommends that, as a future research, the development of a web-based manual be developed for more easy applications in general construction project.
극저온 냉각과 나노유체 극미량 윤활을 적용한 인코넬 718 선삭가공에서의 절입부 마모 감소
박충우(C. W. Park),신주호(J.-H. Shin),신강우(K. Shin),이석우(S.-W. Lee),남정수(J. Nam),김성현(S. H. Kim),라문우(M.-W. La),김태곤(T.-G. Kim) Korean Society for Precision Engineering 2021 한국정밀공학회 학술발표대회 논문집 Vol.2021 No.11월
대표적인 니켈기 초내열합금인 인코넬 718은 고온/고압 환경에서의 기계적 특성이 우수하여 항공우주산업에서 내열부품 소재로 적용되고 있다. 그러나 낮은 열전도도로 인해 고온의 절삭열과 함께 가공경화가 발생한다. 이로 인해 소재 표면 경도가 증가하게 되고 가공 시 공구의 절입부 마모가 가속화되어 공구수명이 저하된다. 이에 본 연구에서는 극저온 냉각 방식과 나노유체 극미량 윤활(극저온+nMQL)을 적용하여 냉각성과 윤활성을 향상시켜 기존 가공방식 대비 노치마모 감소효과를 확인하였다. 실험에 앞서 극저온 가공에 적용하기 위한 극미량 윤활의 분사조건 선정 실험을 진행하였다. 또한 70 nm 의 hBN 입자를 0.5 wt%로 혼합하여 윤활성을 극대화하였다. 선정한 분사조건을 토대로 인코넬 718 외경선삭가공을 실시하였으며, 노치마모 감소효과를 확인하기 위해 기존 습식가공 및 건식가공을 함께 진행하였다. 또한 노치마모의 감소 원인을 파악하기 위해 절삭력과 가공표면경도를 바교분석하였다. 실험 결과 제안된 가공방식에서 동일 가공시간을 기준으로 노치마모가 기존 습식가공에 비해 약 57% 감소하였다. 이와 관련하여 이송분력을 비교한 결과 습식가공을 기준으로 건식가공에서 3.45% 증가하였으며, 극저온 +nMQL 에서 5.2% 감소한 것을 확인하였다. 또한 경도 측정결과 건식방식에서 표면경도가 가장 높았으며 극저온 +nMQL에서 가장 낮은 표면경도를 보임과 동시에 경화층이 가장 적은 것으로 나타났다. 이를 토대로 극저온 +nMQL 방식에서의 우수한 냉각성과 윤활성을 바탕으로 공구의 기대수명이 가장 높을 것으로 예상되며 인코넬 718 선삭 시 생산성 향상에 크게 기여할 수 있을 것으로 기대된다.
맹주양,박충우 순천향대학교 기초과학연구소 2002 순천향자연과학연구 논문집 Vol.8 No.2
The formation of novel organometallic compounds by the reaction of organic substrates with finely divided metal powders represents a powerful tool for the synthetic chemistry. The direct reaction with a zerovalent metal is the only viable method of synthesis for many of these compounds. Accordingly, chemists have been activity developing new methods for increasing the reactivity of metal powders toward organic substrates. Three principal approaches have been developed in recent years: the metal vaporization method, sonochemistry, and the preparation of finely divided metal powders by the reduction of metal salts. A number of new methods of synthesis have resulted from these studies.
이론적 방법과 유한요소해석이 융합된 커팅용 공구 혼의 설계에 관한 연구
이한창,정진혁,박충우,오명석,박명규,이봉구,김창환,Lee, Han-Chang,Jeong, Jin-Hyuk,Park, Chung-Woo,Oh, Myung-Seok,Park, Myung-Kyu,Lee, Bong-Gu,Kim, Chang-Hwan 한국융합학회 2018 한국융합학회논문지 Vol.9 No.6
본 연구에서는 초음파 진동에너지가 융합된 커팅기용 공구 혼 제작에 대한 기초 연구 자료를 제작하고자 이론적방법과 유한요소해석을 병행하여 설계하였다. 고 성능의 초음파 절단을 진행하기 위해서는 횡진동이 아닌 종진동으로만 진동해야 하며, 기계적 진동에너지를 효율적으로 전달하기 위해 출력부에 최대진폭이 발생해야 한다. 따라서 공구 혼은 발진기의 가진 주파수와 공구 혼의 고유주파수가 동일하게 설계되어야만 한다. 공구 혼을 공진설계하기 위해서는 1차원 파동방정식을 이용한 이론적 접근법과, 유한요소 해석결과를 설계모델에 반영하는 방법이 있는데, 본 연구에서는 최초에 공구 혼의 대략적인 치수를 1차원 파동방정식을 통해 결정하고, 유한요소 해석 결과를 바탕으로 최적 모델을 선정하여 공구 혼의 최종 형상에 반영하였다. 이와 같은 내용을 실제 커팅용 공구 혼의 기초자료로 활용하고자 하며, 추후 제작 및 실험 데이터를 본 연구내용과 비교할 예정이다. In this study, the theoretical method and the finite element analysis were designed in parallel to fabricate basic research data on the production of tool horn for cutting machine with ultrasonic vibration energy. In order to perform high-performance ultrasonic cutting, it is necessary to vibrate only with longitudinal vibration instead of transverse vibration. In order to efficiently transmit the mechanical vibration energy, the maximum amplitude should be generated at the output portion. Therefore, the tool horn must be designed so that the excitation frequency of the oscillator and the natural frequency of the tool horn are the same. In order to design the resonance of the tool horn, there are a theoretical approach using the one-dimensional wave equation and a method of reflecting the finite element analysis result to the design model. In this study, the approximate dimensions of the tool horn are first determined through the one- Based on the results of the finite element analysis, the optimal model was selected and reflected in the final shape of the tool horn. We will use this information as the basic data of actual tool horn for cutting, and will compare the production and experimental data with the contents of this research.