에폭시수지가 도포된 폴리이미드와 스크린 프린팅 Ag 사이의 계면접착력 평가

박성철,김재원,김기현,박세호,이영민,박영배,Park, Sung-Cheol,Kim, Jae-Won,Kim, Ki-Hyun,Park, Se-Ho,Lee, Young-Min,Park, Young-Bae 한국마이크로전자및패키징학회 2010 마이크로전자 및 패키징학회지 Vol.17 No.1

스크린 프린팅된 Ag 박막과 에폭시 수지로 코팅된 폴리이미드 사이의 계면접착력을 $180^{\circ}$ 필 테스트를 통해 정량적으로 구하였다. 스크린 프린팅된 Ag 박막과 에폭시 수지 코팅된 폴리이미드 사이 필 강도는 $164.0{\pm}24.4J/m^2$이었다. 오븐에서 $120^{\circ}C$ 조건에서 24시간 동안 열처리 한 Ag/폴리이미드의 필 강도는 $220.8{\pm}19.2J/m^2$로 증가하였고, $85^{\circ}C/85%$ 상대습도 조건에서 120시간 동안 유지한 Ag/폴리이미드의 필 강도는 $84.1{\pm}50.8J/m^2$로 감소하였다. 전계방출형 주사전자현미경과 XPS를 통해 박리된 시편 표면을 분석한 결과, 열처리 및 고온/다습조건처리 시 스크린 프린팅 Ag 박막과 에폭시 수지 코팅층 사이의 계면접착력은 에폭시 수지와 수분 사이의 가수분해 결합 반응으로 인해 계면접착력 증가 및 감소하는 경향과 밀접한 연관성이 있는 것으로 판단된다. The interfacial adhesion strengths between screen-printed Ag film and epoxy resin-coated polyimide were evaluated by $180^{\circ}$ peel test method. Measured peel strength value was initially around $164.0{\pm}24.4J/m^2$, while the heat treatment during 24h at $120^{\circ}C$ increase peel strength up to $220.8{\pm}19.2J/m^2$. $85^{\circ}C/85%$ RH temperature/humidity treatment decrease peel strength to $84.1{\pm}50.8J/m^2$, which seems to be attributed to hydrolysis bonding reaction mechanism between metal and adhesive epoxy resin coating layer.

$Ar^+$ RF 플라즈마 처리조건이 임베디드 PCB내 전극 Cu박막과 ALD $Al_2O_3$ 박막 사이의 계면파괴에너지에 미치는 영향

박성철,이장희,이정원,이인형,이승은,송병익,정율교,박영배,Park, Sung-Cheol,Lee, Jang-Hee,Lee, Jung-Won,Lee, In-Hyung,Lee, Seung-Eun,Song, Byoung-Ikg,Chung, Yul-Kyo,Park, Young-Bae 한국마이크로전자및패키징학회 2007 마이크로전자 및 패키징학회지 Vol.14 No.1

임베디드 PCB 기판내 유전체 재료인 Atomic Layer Deposition(ALD) $Al_2O_3$ 박막과 전극재료인 스퍼터 증착된 Cu박막 사이의 계면접착력을 $90^{\circ}$ 필 테스트방법으로 측정하여 순수 빔 굽힘을 가정한 에너지 평형 해석을 통하여 계면파괴에너지를 구하였다. $Cu/Al_2O_3$의 계면파괴에너지(${\Gamma}$)는 매우 약하여 측정할 수 없었으나, 접착력 향상층 Cr 박막을 삽입하여 $Cr/Al_2O_3$의 계면파괴에너지는 $10.8{\pm}5.5g/mm$를 얻었다. $Al_2O_3$ 표면에 $0.123W/cm^2$ 의 power density로 2분간 $Ar^+$ RF 플라즈마 전처리를 하고 Cr박막을 삽입한 $Cr/Al_2O_3$ 계면파괴에너지는 $39.8{\pm}3.2g/mm$으로 매우 크게 증가하였는데, 이는 $Ar^+$ RF 플라즈마 전처리에 따른 mechanical interlocking효과와 Cr-O 화학결합 효과가 동시에 기여한 것으로 생각된다. Interfacial fracture energy(${\Gamma}$) between $Al_2O_3$ thin film deposited by Atomic Layer Deposition(ALD) and sputter deposited Cu electrode for embedded PCB applications is measured from a $90^{\circ}$ peel test. While the interfacial fracture energy of $Cu/Al_2O_3$ is very poor, Cr adhesion layer increases the interfacial fracture energy to $39.8{\pm}3.2g/mm\;for\;Ar^+$ RF plasma power density of $0.123W/cm^2$, which seems to come from the enhancement of the mechanical interlocking and Cr-O chemical bonding effects.

고효율 효소를 분비하는 균주의 선발 및 신문고지의 효소탈묵 특성(제2보) -Cellulase와 Xylanase를 생산하는 Fungi의 분리 및 선발-

박성철,강진하,이양수,Park Seong-Cheol,Kang Jin-Ha,Lee Yang-Soo 한국펄프종이공학회 2004 펄프.종이기술 Vol.36 No.3

The useful fungi which secret extracellular enzymes was selected for deinking agent of old newsprint. Five fungal strains were isolated from a paper mill soil ground. The CMCase, FPase and xylanase activities of fungi on the liquid culture were investigated at optimal growth conditions. The results of this study were as follow: The optimal pH and temperature for culture growth were 4~8 and 27~$35^{\circ}C$, respectively. For screening of extracellular enzymes at optimal culture conditions the optimal culture period were less than 6-7 days. Fusarium pallidoroseum and Aspergiilus niger which shows relatively higher CMCase, FPase and xylanase activities than the other species were selected for further enzymatic deinking research.

학교 내 안전체험교실의 시설모형 개발 연구

박성철,안유정,송병준,조진일,Park, Sung-Chul,Ahn, Yoo-Jeong,Song, Byung-Joon,Cho, Jin-ll 한국교육녹색환경연구원 2017 교육·녹색환경연구 Vol.16 No.2

본 연구는 교육부, 학교현장, 건축가, 기업 등 관련 기관의 정책수립, 운영계획수립, 시설건립 등 다양한 사업추진과 밀접한 관계가 있는 '안전체험교실 시설모형을 개발'하기 위하여 안전체험교실에 적용하기 위한 필수 교육프로그램을 도출하고 단위공간 조성과 이에 대한 구성요소 및 활용방안을 제시하는데 목적이 있다. 본 연구는 5단계로 내용을 구성하였다. 첫째, 안전교육 수행 및 시설계획 기본방향과 관련한 문헌을 분석하였으며, 둘째, 공간규모, 시설구성 등 공간조성 실태와 운영실태분석을 바탕으로 안전교육 체험교실 실태를 조사하였다. 이를 기반으로 기존 안전체험교실의 장 단점을 분석하고 델파이 조사 및 전문가 참여디자인을 통하여 5가지의 시설모형(안)을 개발하였다. 최종적으로 개발된 안전체험교실 시설모형(안)은 1) 교통안전(보행안전, 차량안전, 지하철안전) 2) 응급처치(응급구조, 신고요령) 3) 재난안전(화재 대피안전, 지진 생활안전) 4) 승강기안전(승강기안전, 에스컬레이터안전) 5) 약물 및 폭력안전(흡연 음주안전, 성폭력안전, 식품안전)에 대한 체험존과 각 영역의 세부 안전체험공간이다. 이러한 과정을 통해 개발된 안전체험교실 시설모형(안)은 학교현장의 수용 가능한 공간적 규모에 따라 각 모형을 조합 또는 분리하여 안전체험교실을 조성할 수 있을 것이다. The purpose of this study is to derive education programs for safety training class, create unit spaces and present components and methods of utilizing the spaces for the development of facilities models closely related to various policy, operation plan and facility construction projects promoted by related institutions such as the Ministry of Education, schools, architects and companies. This study is divided into five steps. First, we reviewed the literature related basic directions for safety education and facility plan, second, field survey included both field conditions such as spatial size and facility configuration and analysis of operating conditions like hours of operation and personnel. Base on literature review and field survey, it were used to analyze strengths and weaknesses of existing safety training classes, and five facility models was developed based on the Delphi method and expert participatory design. The result show that the facility models (drafts) of safety training class were developed as follows: (1)the facility model for traffic safety(pedestrian safety, vehicle safety, subway safety) (2)the facility model for first aid(emergency rescue, how to report) (3)the facility model for disaster safety(fire evacuation safety, life earthquake safety) (4)the facility model for elevator safety(elevator safety, escalator safety) (5)the facility model for drugs and violence safety (smoking drinking, sexual harassment safety, food safety) The safety training class can be composed by combining or separating each module according to affordable space size of each school.

재활용 황산니켈의 국내·외 품질기준현황 및 생산제품의 전해도금 성능 비교

박성철,김용환,신호정,이만승,손성호,Park, Sung Cheol,Kim, Yong Hwan,Shin, Ho Jung,Lee, Man Seung,Son, Seong Ho 한국자원리싸이클링학회 2021 資源 리싸이클링 Vol.30 No.3

In Korea, a good recycled product (GR) certification system was introduced in 1997 to improve resource and energy use efficiency. However, in industry and society, recycled products are not used well because of the lack of awareness of recycled materials. In this study, the status of domestic and international quality standards for nickel materials was investigated, and the purity and electrochemical properties of nickel sulfate prepared from ore and nickel sulfate recovered from waste lithium-ion batteries were evaluated during the electroplating process. As a result of the test, it was found that there is no quality difference between recycled nickel sulfate and high-purity nickel sulfate reagents when used in the electroplating industry.

FSI 해석에 의한 비정형 초고층 빌딩의 풍응답 특성에 관한 연구

박성철,김효진,한상을,Park, Sung Chul,Kim, Hyo Jin,Han, Sang Eul 한국전산구조공학회 2014 한국전산구조공학회논문집 Vol.27 No.4

본 논문에서는 FSI해석을 이용하여 비정형 초고층 빌딩의 풍응답 특성을 연구하였다. 해석모델은 Twist모델이며, 뒤틀림 각도와 풍가속도의 상관관계에 대해 연구 중점을 두었다. 먼저 단방향 해석을 수행하여 100년 재현주기 풍속에 대한 최대 횡 변위를 구하고, 제한조건을 만족하는 탄성계수를 산출한다. 그리고 양방향 해석을 수행, 시간이력해석을 통해 산출된 탄성계수와 임의의 밀도를 가지는 풍가속도를 예측하게 된다. 정방형 모델은 높이 400m, 변장비 1:1, 세장비 8로 설정, 뒤틀림 모델은 0도에서 90도까지 15도 간격으로, 90도에서 360도까지 90도 간격으로 비틀어 회전시켰다. 형상에 따른 풍가속도 예측 결과, 정방형 모델이 뒤틀림 모델보다 크게 산출되어 풍진동 영향에 더 민감한 것을 검증하였다. In this paper, the wind-induced response characteristics of freeform shaped tall building is studied by using FSI analysis. The analytical models are twist shaped ones at representing type of atypical tall building, and this study focused on the relationship between twist angle and wind acceleration. Firstly, 1-way FSI analysis is performed, so maximum lateral displacement of the analytical model for 100 years return period wind speed is calculated, then the elastic modulus of a structure that satisfies the constraints condition is evaluated. And 2-way FSI analysis is carried out. so acceleration of the analytical model for the evaluated modulus of elasticity and arbitrary density is predicted through time history analysis. The basic model is a set of a square shape, height is 400m, slenderness ratio is 8, and twist model is rotated at square model from 0 to 90 degrees at intervals of 15 degrees and from 90 to 360 degrees at intervals of 90 degrees. According to the result of predicting wind acceleration by the shape of each model, the wind vibration effect of square shape model is confirmed to be sensitive more than a twist shape ones.

한국인에서의 연령 및 성별에 따른 안압-단면적 연구

박성철,기창원,Sung Chul Park,Changwon Kee 대한안과학회 2008 대한안과학회지 Vol.49 No.1

`Purpose: To assess the effect of age and gender on intraocular pressure (IOP) in a large Korean population. Methods: This cross-sectional study included 102,218 healthy Koreans who were aged between 20 and 79 and had no preexisting ocular conditions that could affect the IOP. All the subjects had undergone a physical check up between 1996 and 2005, and their medical records were reviewed retrospectively. Anthropometric measurements, blood tests, noncontact tonometry, and fundus examination were performed on all participants. Subjects were grouped according to decade of age. For all subjects and each age group, age and systemic variables were analyzed by multiple regression analysis on their relationship with IOP. Results: A significant trend of decreasing IOP was observed in the 40s, 50s, and 60s in men, while a significant trend of increasing IOP was found in the 50s, 60s, and 70s in women. Multiple regression analysis revealed different IOP trends with age between age groups in both men and women. In general, the IOP had a significant positive correlation with systolic blood pressure, body-mass index (BMI), hematocrit, and serum cholesterol, especially with BMI in men and hematocrit in women. Conclusions: In a multiple regression analysis, the IOP trend in each age group was quite different from each other in a large Korean population, and it was suggested that women may have a steeper increasing slope (or less steep decreasing slope) of IOP with age than men. Further investigations with longitudinal study would be required to clarify the age- and gender-related physiologic changes of IOP.`

학교 현장 중심의 학교공간혁신사업을 위한 개선방안 - 강원도교육청 학교 감성화사업을 중심으로 -

박성철,유해연,김현진,이상민,신은경,Park, Sung-Chul,Yoo, Hae-Yeon,Kim, Hyun-Jin,Lee, Sang-Min,Shin, Eun-Gyeong 한국교육녹색환경연구원 2021 교육·녹색환경연구 Vol.20 No.1

본 연구는 교육부에서 2019년부터 국가수준에서 추진하고 있는 학교공간혁신사업의 학교 현장의 효과적인 운영을 위한 방안을 제시하기 위하여 대표적인 시도교육청 사업 중 하나인 강원도교육청의 학교 감성화 사업을 분석하였다. 2장에서는 학교 감성화사업의 추진프로세스와 단계별 주요 추진주체를 분석하였다. 3장에서는 단계별 주요 참여자들 대상의 면담조사를 통하여 주요 문제점들을 도출하였다. 마지막으로 4장에서는 사업설명회 실효성 증대, 퍼실리테이터 역량 강화, 가이드라인 개발 등 문제점들을 해결하기 위한 포괄적인 방안들을 제시하였다. 본 연구의 결과가 향후 지속적으로 추진되는 학교공간혁신사업을 학교 현장에서 효과적으로 추진하기 위한 정책 대안으로 활용되어 보다 학교 현장에 부합하는 혁신적인 학교 공간이 만들어지길 기대한다. The objective of this research is to propose the policy alternatives which can assist schools to effectively carry out the School Space Innovation Project (SSIP) of the Ministry of Education. The Emotional Space Project (ESP) of Gangwon-do School District was analyzed as one of representative SSIPs. Chapter II analyzed the project process and stakeholders involved in the ESP. Chapter III carried out the interview with the representative stakeholders that had participated in each step. The interview described the major problems ESP and SSIP have. Finally, Chapter IV proposed the comprehensive alternatives to deal with the problems, such as improving the effectiveness of project information sessions, strengthening the competencies of facilitators, and developing guidelines. It is expected that the research alternatives can be applied for developing innovative school spaces more suited to school scenes as well as helping effective operation of SSIP in schools.

과학기사에 대한 새로운 패러다임

박성철,Park, Seong-Cheol 한국과학기술단체총연합회 2008 과학과 기술 Vol.41 No.5

학교시설 복합화를 위한 표준협약서 개발

박성철,박희원,정태환,Park, Sung-Chul,Park, Hee-Won,Jung, Tae-Hwan 한국교육녹색환경연구원 2014 교육·녹색환경연구 Vol.13 No.2

A school building complex means building both the learning spaces of students and convenience space of community within school lands. The projects have has a positive effect on saving the national budget as well as expanding the learning spaces. The absence of standard agreement contracted through discussion of participants, however, has made many problems in the operated projects. Through analysis on the previous researches and conference, the paper finds main problems discussed in the operating step. And, the feasibility study is carried out in order to analyze the appropriateness of on the existing agreements on the problems. Finally, the paper presents the standard agreement for the school building complex projects. The practitioners can prevent the existing problems from new projects through using the proposed agreement. Furthermore, it is expected that the school building complex projects will be activated.