http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정책 활동과 인물 특성에 대한 인식이 정치인 이미지와 선호에 미치는 영향
김태완(Kim, Tae Wan),허윤철(Heo, Yun-Cheol),황성욱(Hwang, Sungwook),박홍원(Park, Hong-Won) 한국광고홍보학회 2020 한국광고홍보학보 Vol.22 No.1
본 연구는 정치인 이미지와 그 영향 요인을 통해 정치인에 대한 유권자의 선호를 설명하고자 하였다. 유권자가 상정한 정치인과 그에 대한 평가를 묻는 설문 조사 결과를 바탕으로 분석한 결과, 정치인에 대한 능력과 부패의 이미지, 정치인의 인물 특성과 정책 활동에 대한 인식을 하위 요인으로 하는 정치인에 대한 유권자의 선호를 결정하는 모형이 구성되는 것으로 확인되었다. 또한, 정치인 선호 결정 모형은 유권자의 성별과 정치적 성향에 따라, 대상이 되는 정치인의 성별과 중앙/지방 정치인이라는 특성에 따라 하위 요인의 영향력에 차이가 있는 것으로 확인되었다. 이러한 분석 결과는 기능 이론 연구를 수용자 관점으로 전환하였다는 이론적 함의와 정치인의 이미지 메이킹 과정에서 고려해야 할 요소를 확인하여, 그에 대한 대안을 제시하도록 하는 실무적 함의를 가지는 것으로 볼 수 있다. This study examined the influence of perceived policy activities and perceived character features on politicians’ image and preference to them. This survey study asked respondents to think of a politician and to evaluate him or her. After performing a series of analysis, this study found a good fit of the model testing the relationships among perceived policy activities and perceived character features as predisposing factors, politicians’ ability image and their corruption image as mediating factors, and respondents’ attitude towards politicians as a final endogenous factor. In addition to that, this study found that respondents’ gender, their political propensity, politicians’ gender, and politicians’ constituency are significant moderating variables. Based on the results, this study discussed scholarly implications for the functional theory of political discourse and practical implications for politician’s image PR.
알루미늄 합금과 고장력 강판 접합을 위한 헬리컬 SPR의 설계
김원영(W.Y. Kim),김동범(D.B. Kim),박진근(J.G. Park),김도훈(D.H. Kim),김기호(K.H. Kim),이인환(I.H. Lee),조해용(H.Y. Cho) 대한기계학회 2014 大韓機械學會論文集A Vol.38 No.7
Self-piercing rivet(SPR)은 이종재료 접합을 위해 사용되는 결합용 기계요소로써, 대표적으로는 알루미늄 합금과 강판 등 용융점이 서로 다른 재료의 접합에 사용된다. SPR 접합은 일반 리벳접합과 달리 스스로 홀을 가공하며 삽입되기 때문에 사전의 홀 가공이 필요 없다.(1) 상부판재를 천공하고 하부판재와 함께 소성 변형되어 결합된다. 자동차의 차체 경량화를 위해서는 알루미늄 합금과 같은 경량소재가 사용되며, 부분적으로 스틸과 알루미늄 합금의 이종재료 접합이 요구된다. 그러나 알루미늄 합금과 강판은 용융점이 다르므로 기존의 차체 결합방법으로 이용되고 있는 저항 용접이 불가능하다. 이에 따라, 기계적 결합방법의 하나인 SPR 접합이 요구된다.(2) 따라서 본 연구에서는 강소성 유한요소해석 프로그램을 이용하여 리벳과 판재의 접합 성형성을 검토하고, 고장력 강판을 접합할 수 있는 새로운 형상의 SPR을 설계하였다. 또한 해석결과와 실험의 비교를 통하여 해석의 신뢰성을 검증하였다. A self-piercing rivet (SPR) is a mechanical component for joining dissimilar material sheets such as those of aluminum alloy and steel. Unlike conventional rivets, the SPR directly pierces sheets without the need for drilling them beforehand. However, the regular SPR can undergo buckling when it pierces a high-strength steel sheet, warranting the design of a helical SPR. In this study, the joining and forging processes using the helical SPR were simulated using the commercial FEM code, DEFORM-3D. High-tensile-strength steel sheets of different strengths were joined with aluminum alloy sheets using the designed helical SPR. The simulation results were found to agree with the experimental results, validating the optimal design of a helical SPR that can pierce high-strength steel sheets.
구경이,정문영,김기헌,강성주,최원혁,김원영,최완,Ku, K.I.,Chung, M.Y.,Kim, K.H.,Kang, S.J.,Choi, W.H.,Kim, W.Y.,Choi, W. 한국전자통신연구원 2009 전자통신동향분석 Vol.24 No.4
웹 2.0 시대를 맞이하여 어느 특정 기업의 기술이 아닌, 개인들의 참여를 기반으로 하는 서비스 인프라가 인터넷 서비스 분야의 핵심 기술로 자리매김하고 있다. 사용자 참여형 서비스 인프라는 사용자에게 작업 환경을 제공하거나 소프트웨어의 개발 및 유통을 지원하여 개인이 제작한 콘텐츠와 소프트웨어를 이용해 집단 지성이 쌓이면서 수익이 창출되도록 하고 있다. 본 논문에서는 사용자 중심의 서비스 인프라로서 이동형 소프트웨어 플랫폼 YouFree$^{TM}$을 소개한다. 본 논문에 소개된 YouFree$^{TM}$은 사용자에게 언제 어디서나 편리한 개인맞춤의 작업 환경을 제공해 사용자가 쉽게 콘텐츠 제작에 참여할 수 있고, 개발환경을 이용해 필요한 소프트웨어를 쉽게 개발할 수 있다. 또한, 제작된 콘텐츠와 개발된 소프트웨어를 쉽게 유통시킬 수 있다.
김형환,원희선,오병택,이상민,박경현,이지현,양경아,이원재,허성진,정문영,김원영,전성익,최완,Kim, H.H.,Won, H.S.,Oh, B.T.,Lee, S.M.,Park, K.H.,Lee, J.H.,Yang, K.A.,Lee, W.J.,Hur, S.J.,Chung, M.Y.,Kim, W.Y.,Jun, S.I.,Choi, W. 한국전자통신연구원 2009 전자통신동향분석 Vol.24 No.4
최근 국내 소프트웨어 시장에서 소프트웨어를 서비스로 사용하는 SaaS에 대한 관심이 부각되고 있다. 본 고에서는 SaaS의 정의와 개념을 살펴보고 핵심기능인 멀티테넌시를 구현하기 위한 참조모델을 소개한다. 또한, 해외 및 국내의 개발 사례를 알아보고 국가 플랫폼 과제의 일환으로 2009년부터 한국전자통신연구원에서 수행하는 SaaS 플랫폼 개발과제를 소개하며 앞으로의 SaaS 플랫폼 개발을 전망해 본다.
김준식,김원호,김원영,김영진,한학석,김맹중 한국축산학회 1998 한국축산학회지 Vol.40 No.1
This experiment was conducted at theForage Research Farm of the Beef and Dairy Cattle Division, National Livestock Research Institute, Songhwan in 1992 and 1995 to investigate the effects of planting time (April 15, May 11, June 5) on the growth and yield of silage com(Zea mat's L.). In the plant height, P3144W and DK729 were taller than the others, as 301.6, and 296.3cm, respectively, and P3282 was the shortest as 247.7㎝ at the first planting time. P3144W and DK729 were taller than the others, as 303.6㎝, 281.7㎝, respectively, and P3282 was the shortest as 249.6㎝ at the second planting time. P3144W was the tallest as 276.9㎝. DK689 was the shortest as 246.1㎝ at the third planting time. The ear heights of P3144W and P3282 were 137.3 and 132.7㎝, respectively, and Suweon 19 was the shortest as 116.4㎝ at the first planting time. Those of P3144W and P3282 were as 135.9, 134.4㎝, respectively, and Suwoen 19 was the shortest as 112.1㎝ at the second planting time. P3144W was the tallest as 111.0㎝ and Suweon 19 was the shortest as 94.2㎝ at the third planting time. In the dry matter yield per ha, P3352, DK729 and P3144W were higher than the others as 18,957, 18,840, 18,743㎏, respectively, and P3282 was the lowest as 13,863㎏ at the first planting time. 64743 and P3352 were 18,183 and 17,874㎏, respectively, and Suwoen 19 was the lowest as 15,007㎏ at the second planting time. P3144W was the highest as 19,112㎏ and Suwnen 19 was the lowest as 14,793㎏ at the third planting time. The TDN yield per ha, of P3352, P3144W and DK729 were 13,552, 13,281 and 13,252㎏, respectively, and P3282 was the lowest as 9,793㎏ at the first planting time. 64743 and P3352 were higher than the others as 13,149 and 13,009kg, respectively, and Suwoen 19 was the lowest as 10,872㎏ at the second planting time. P3144W was the highest as 13,521㎏ and Suwven 19 was the lowest as 10,392㎏ at the third planting time.