http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Mg+Al<sub>2</sub>Ca 첨가 ADC12 (Al-Si-Cu) 합금의 미세조직, 인장 및 고주기 피로 특성
김영균,김민종,김세광,윤영옥,이기안,Kim, Y.K.,Kim, M.J.,Kim, Shae K.,Yoon, Y.O.,Lee, K.A. 한국소성가공학회 2017 소성가공 : 한국소성가공학회지 Vol.26 No.5
This study investigated the microstructure, tensile strength, and high cycle fatigue properties of ADC12 aluminum alloys with different $Mg+Al_2Ca$ contents manufactured using die casting process. Microstructural observation identified the presence of ${\alpha}-Al$, eutectic Si, $Al_2Cu$, and Fe-intermetallic phases. The increase of $Mg+Al_2Ca$ content resulted in finer pore size and decreased pore distribution. Room temperature tensile strength tests were conducted at strain rate of $1{\times}10^{-3}/sec$. For 0.6%Mg ADC12, measured UTS, YS, and El were 305.2MPa, 157.0MPa, and 2.7%, respectively. For 0.8%Mg ADC12, measured UTS, YS, and El were 311.2 MPa, 159.4 MPa, and 2.4%, respectively. Therefore, 0.8% ADC12 alloy had higher strength and slightly decreased elongation compared to 0.6% Mg ADC12. High cycle fatigue tests revealed that 0.6% Mg ADC12 alloy had a fatigue limit of 150 MPa while 0.8% Mg ADC12 had a fatigue limit of 160MPa. It was confirmed that $Mg+Al_2Ca$ added ADC12 alloy achieved finer, spherical eutectic Si particles, and $Al_2Cu$ phases with greater mechanical and fatigue properties since size and distribution of pores and shrinkage cavities decreased as $Mg+Al_2Ca$ content increased.
의료용 표시기의 안전성 및 성능 평가를 위한 시험 항목 및 시험방법(안)연구
김영균,조승관,이태우,여창민,정병조,권영미,차지훈,허찬희,박기정,김동섭,김한성,Kim, Y.G.,Cho, S.K.,Lee, T.W.,Yeo, C.M.,Jung, B.J.,Kwon, Y.M.,Cha, J.H.,Hur, C.H.,Park, K.J.,Kim, D.S.,Kim, H.S. 대한의용생체공학회 2011 의공학회지 Vol.32 No.2
Tattooing is a performance for decorative and cosmetic marking by placing permanent ink into the skin. As the cultural meaning of tattoo in Korea is changing, the tattoo machines are widely spread n permanent cosmetic market. Though the use of the tattoo machine was increased, the evaluation standards of tattoo machine were not existed. Korea Food and Drug Association regulated the electrical and mechanical safety standards which were founded on the IEC 601-1 second edition. Also they regulated he biological safety standards which were derived from the ISO 10993 series, however, these general valuations of common medical device were insufficient for evaluating tattoo machine. We developed the standards of tattoo machine for safety and performance evaluation for tattoo machine by preliminary hazard analysis in ISO 14971. The evaluation criteria of tattoo machines are focused on the mechanical invasion. We suggested the additional evaluation items of the needle speed, length, vibration with general valuation criteria of common medical device. We anticipate that this research may be a primary stage to figure a standard regulation and evaluation for tattoo machine.
바다-$IV/I^2R$: 고차원 이미지 색인 구조를 이용한 효율적인 내용 기반 이미지 검색 시스템의 설계와 구현
김영균,이장선,이훈순,김완석,김명준,Kim, Yeong-Gyun,Lee, Jang-Seon,Lee, Hun-Sun,Kim, Wan-Seok,Kim, Myeong-Jun 한국정보처리학회 2000 정보처리학회논문지 Vol.7 No.2
A variety of multimedia applications require multimedia database management systems to manage multimedia data, such as text, image, and video, as well as t support content-based image or video retrieval. In this paper we design and implement a content-based image retrieval system, BADA-IV/I$^2$R(Image Information Retrieval), which is developed based on BADA-IV multimedia database management system. In this system image databases can be efficiently constructed and retrieved with the visual features, such as color, shape, and texture, of image. we extend SQL statements to define image query based on both annotations and visual features of image together. A high-dimensional index structure, called CIR-tree, is also employed in the system to provide an efficient access method to image databases. We show that BADA-IV/I$^2$R provides a flexible way to define query for image retrieval and retrieves image data fast and effectively: the effectiveness and performance of image retrieval are shown by BEP(Bull's Eye Performance) that is used to measure the retrieval effectiveness in MPEG-7 and comparing the performance of CIR-tree with those of X-tree and TV-tree, respectively.
김영균,김수관,김경욱,엄인웅,Kim, Young-Kyun,Kim, Su-Gwan,Kim, Kyung-Wook,Um, In-Woong 대한악안면성형재건외과학회 2011 Maxillofacial Plastic Reconstructive Surgery Vol.33 No.3
An extraction socket was preserved and reconstructed using an autogenous tooth bone graft powder and block in two patients. The grafted site was healed 3 to 3.5 months after surgery. Implant treatment was successfully completed.
상악동골이식과 임프란트 식립에 관한 후향적 임상 연구 : $7{\sim}41$개월간의 경과관찰
김영균,윤필영,임재형,Kim, Young-Kyun,Yun, Pil-Young,Im, Jae-Hyung 대한악안면성형재건외과학회 2008 Maxillofacial Plastic Reconstructive Surgery Vol.30 No.3
The authors performed the clinical and radiographic evaluation in the 29 patients with sinus bone graft and $Osstem^{(R)}$ implant placement between Sep 2003 and Jan 2006 and got the following results. 1. Fifteen complications developed in the 13 patients. Intraoperative sinus membrane perforation and postoperative maxillary sinusitis developed frequently. 2. The mean preoperative residual alveolar bone height was 4.5 mm, postoperative height 18.5 mm, height 1 year after operation 16.9 mm. 3. Three primary osseointegration failures(3.7%) developed in 3 patients. 4. The survival rate of prosthodontics was 100% at the final follow up. The mean marginal bone resorption around the implants was 0.69 mm 1 year after prosthodontic loading. Marginal bone resorption more than 1.5 mm developed in nine implants and the success rate was 88%.
패키지 딜 방식의 해외 에너지자원 획득에 관한 플랜트EPC기업참여 촉진방안연구
김영균,문선애,문승재,이재헌,유호선,Kim, Young-Kyun,Moon, Sun-Ae,Moon, Seung-Jae,Lee, Jae-Heon,Yoo, Hoseon 한국플랜트학회 2009 플랜트 저널 Vol.5 No.2
Promoting policy to involve plant EPC companies for package deal has been studied to acquire overseas energy resources. The effectiveness of the package deal with the plant EPC companies has not been successful because the participation of the plant EPC companies is very rare. It is difficult for the plant EPC companies to join the package deal due to the lack of the fully responsible organization to support the plant EPC companies participating in a package deal. The followings are suggested as the ways to promote the participation of the plant EPC companies for package deal in this study; 1) financial support of the government for plant EPC companies 2) political support of the government for plant EPC companies 3) specialization of the advanced countries for public-private cooperation.